Excurzion Posted July 18, 2011 Report Posted July 18, 2011 Is it possible to wire my 2 hdc3 dvc 1 ohm subs lower than one ohm on my aq2200 it might be a noob question. But any help would be appreciated.
MrSkippyJ Posted July 18, 2011 Report Posted July 18, 2011 .25 ohm but I wouldn't do it F150: Stock 2019 Harley Road Glide: Amp: TM400Xad - 4 channel 400 watt Processor: DSR1 Fairing (Front) 6.5s -MMats PA601cx Lid (Rear) 6x9s - TMS69
Excurzion Posted July 18, 2011 Author Report Posted July 18, 2011 Probably only for a competiton burp it would be alright but not daily...
Supercharged DCs Posted July 18, 2011 Report Posted July 18, 2011 You need to talk with AMI Customs. He seems like the local AQ professional. Bassless once again. Can't seem to keep a system for more than a few weeks Saving for a '06 Nissan 350z, look for build around June 2012.
fecupe2001 Posted July 18, 2011 Report Posted July 18, 2011 0.25 ohms only for comps and 1 ohm for daily, i wouldn´t wire that amp below 0.5 ohms for daily, i think Ami Customs tried his AQ3500´s on music and they protected after around 15 seconds of music iirc. Why do you need to wire it below 1 ohm?? if you are asking if your D1 subs can be wired below 1 ohm, it means that you shouldn´t be doing it, sorry... I´m the SPL Gains topic creator!! wanna get louder?? check this: SPL Gains. Panamenian 2009 & 2010 & 2014 Bass Race 149.9 Champion! 2 15" subs and a 2K wired at 1 ohm, http://www.stevemeadedesigns.com/board/topic/167788-fecupe2001-2-15s-on-a-2k-video-on-page-3/ 8 Massive 15" subs and small power, http://www.stevemeadedesigns.com/board/topic/179296-fecupe2001s-8-15s-4th-order-bandpass-wall/
mlstrass Posted July 20, 2011 Report Posted July 20, 2011 .25ohm for a roll up burp only, not for daily. Been running AQ3500's for 3+ years now and have done .5ohm daily and .25ohm for burps with no issues
Recommended Posts
Archived
This topic is now archived and is closed to further replies.