Stee-Z Posted August 14, 2011 Report Posted August 14, 2011 i got my system hooked up today, but the bass turns on , yes lol, but i could move the bass knob all the way up, or all the way dopwn... bass stays at same level.... its like the knob is stuck and wont change, and i never broke it because todays the first day using it.. the light turns on and it shows when i clip...... anyone else have this problem and know how to fix?.. my sub should be packing more of a punch Quote (4)DD 9918's (2)DC 10k 8 6.5" focals 2 DD SS4 mid amps Audison Bit One processor Jl-cl-rlc line driver iPad in dash Dual Irragi 320a alts 8 batcaps 4000's Second Skin sound deadened
Stee-Z Posted August 14, 2011 Author Report Posted August 14, 2011 late night bump =/ Quote (4)DD 9918's (2)DC 10k 8 6.5" focals 2 DD SS4 mid amps Audison Bit One processor Jl-cl-rlc line driver iPad in dash Dual Irragi 320a alts 8 batcaps 4000's Second Skin sound deadened
bdog Posted August 14, 2011 Report Posted August 14, 2011 its just a remote gain just unplug it and use the gain on the amp Quote REP
bdog Posted August 14, 2011 Report Posted August 14, 2011 and one of the two i bought didnt work too Quote REP
Stee-Z Posted August 14, 2011 Author Report Posted August 14, 2011 so do you think they would send me a new one for free?? i meen i never did anything to it Quote (4)DD 9918's (2)DC 10k 8 6.5" focals 2 DD SS4 mid amps Audison Bit One processor Jl-cl-rlc line driver iPad in dash Dual Irragi 320a alts 8 batcaps 4000's Second Skin sound deadened
EBW Posted August 14, 2011 Report Posted August 14, 2011 Could be the connection or cable Quote Kenwood KIV-BT900 Front Stage RF 400-4 Runs off dedicated 4 awg ofc RE 6.5 125.5. Lanzar Max Pro 6.5 Boston S60 6.5 components Rear Soundstream BX-15 Boston S60 6.5 components 4x Sundown SA8 v1.5 Crescendo BC3500D 2.4 net 28hz 4 runs of 0 gauge Big 3 HC2400 700ca up front Singer 350 Amp Alt No deadener :/ Scytek Galaxy Alarm
bdog Posted August 14, 2011 Report Posted August 14, 2011 ya they will send u a new one and if not its only $15 Quote REP
canderton01 Posted August 14, 2011 Report Posted August 14, 2011 Just set the gain without using the knob for the time being. I'd contact AQ and see if they could resolve your issue. Having a knob is nice for when you are at a red light or you're driving through a residential area and you don't wanna be bumpin. I guess another way to do this would be adjusting the sub level on your deck. Quote 2002 Camry XLE 35% tints all around 17'' Enkei FD-05 rims Fi Q15 in 3.8cu ft box tuned to 32Hz Pioneer DEH-P7200HD AudioQue AQ1200d 4 Gauge Tsunami wiring/RCA's mids/highs - OEM JBL system AudioTechnix Deadner Big 3 upgrade My YouTube
Stee-Z Posted August 14, 2011 Author Report Posted August 14, 2011 ha on my deck... i cant figure how to do that lol XD.. and i will set it for now, i contacted AW, or messaged them... its a good connection power light turns on and clipping light turns on, but its like its stuck , i was wondering why it wasnt superiorly loud haha, must be stuck on lowish, but still loud Quote (4)DD 9918's (2)DC 10k 8 6.5" focals 2 DD SS4 mid amps Audison Bit One processor Jl-cl-rlc line driver iPad in dash Dual Irragi 320a alts 8 batcaps 4000's Second Skin sound deadened
BJD3 Posted August 14, 2011 Report Posted August 14, 2011 The remote for my M1a (which is the same remote) doesn't work when you go past half way. Its like 12 o'clock is 100%. I just live with it, especially since the last half of the dial is a whole 'nother twist (two sets of turns to go from nothing to full blast). Try calling/emailing AQ and seeing if they will let you replace it. Quote Anti Peel and Seal...lol You may be offended by the above. Don't take it personally, I'm just abrasive. 2002 Buick Park Avenue DC Level 4 M2 12 D2 Car Audio Bargain 1600.1 Eclipse CD3200 ~2 cubes @ 34 hz. Stinger Roadkill Expert
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.