CJ18 Posted May 1, 2013 Report Share Posted May 1, 2013 WOOT! I know who's house I am going to in September lol. I should have my bigger amp by then to so I can test the RF's and the ***.I would be more than happy to dyno them for you. I need to come up with something better than just my name to put on the boot up screen. Quote Link to comment Share on other sites More sharing options...
79 cutty Posted May 2, 2013 Report Share Posted May 2, 2013 Unless I have missed it posted someplace else, were you going to post up a video of the AD-1 in meter mode using the IM-SG to create the spectrum analyzer? Very interested in seeing this function!!! Need to see if I can move some funds around and pick one of these beasts up! I am not a shop, and have severly toned down the amount of installs I do, but a tool like this is first of all almost too cool/fun to pass up, and really creates such an opportunity to get the most out of the money we put into our cars in the first place. I like knowing my investments are being used to their full potential! Quote Firm believer in letting my cars do my talking! You can't rush quality, it doesn't happen overnight. Quality takes time and dedication, but the end results more than pay for it. "Black Pearl" Build Thread http://www.stevemeadedesigns.com/board/topic/67183-1985-buick-regal-limited-build-log/page-1 Link to comment Share on other sites More sharing options...
FeelDaBass Posted May 3, 2013 Report Share Posted May 3, 2013 I'm not sure where else to post this, but someone who owns the AD-1 should Dyno any RF bdCP amp and post what they do at 8 ohms. I've always been curious.Also, very nice product! That would be one fun tool. Quote '98 Chrysler Concorde LXiPioneer DEH-80PRS (HU/processing)Rockford Fosgate T1652-S (components) for frontRockford Fosgate T1693 (6x9s) for rearRockford Fosgate T600-4 running thoseRockford Fosgate T1500-1bdCP running a Rockford Fosgate T1D215 15"in a 3.1 cu ft. net tuned to 34 hz (firing in cabin)Kicker PKD1 (0 & 4 AWG)stock 130 amp alt for now; One yellow top OptimaInstalled everything myself & built box (brother helped) Used a DD-1 to set gains. Build Log: http://www.stevemeadedesigns.com/board/topic/165894-first-build-accumulated-since-i-was-14/Just Pics: http://www.stevemeadedesigns.com/board/garage/vehicle/1463-chrysler-concorde-lxi/?tab=images Link to comment Share on other sites More sharing options...
meade916 Posted May 12, 2013 Author Report Share Posted May 12, 2013 guys, looks like CJ changed his mind.....money refunded and 002 is now going to be available. Between being busy trying to get the 72 done and a 13 day visit by moms/pops last week, i haven't had time to push the product or do much testing to show you what this is capable of. I will though! soon! anybody interested in a very low serial #, email me. #003 & #004 are spoken for and i think someone might take #5.....but #2 is now officially up for grabs. Quote All SMD products + MORE available at my store here! https://wccaraudio.com/ Subscribe to My Youtube Channel! Over 1,000,000 subscribers strong! Turn on your notifications! http://www.youtube.com/meade916 Follow My Instagram! Daily live feeds from the shop, exclusive content way before it hits my Youtube channel...and little squares with photo's in them http://www.instagram.com/meade916 The Official SMD Facebook fan Page https://www.facebook.com/SteveMeadeDesigns/ Follow my Tweet (Twitter) http://www.Twitter.com/meade916 Link to comment Share on other sites More sharing options...
lockdown801 Posted May 13, 2013 Report Share Posted May 13, 2013 I think this one of the best products to have come from D'amore. By giving the consumer the power test our amplifiers the manufacturers can stop giving us BS numbers and pushes them for a standard. Alpine used to do it with the v12 line. There are some out there that still give legit numbers but a lot of them are blowing smoke. Steve thanks for testing the Sundown amp. I have really been considering buying them for my subs now. Quote Link to comment Share on other sites More sharing options...
CJ18 Posted May 13, 2013 Report Share Posted May 13, 2013 guys, looks like CJ changed his mind.....money refunded and 002 is now going to be available. Between being busy trying to get the 72 done and a 13 day visit by moms/pops last week, i haven't had time to push the product or do much testing to show you what this is capable of. I will though! soon! anybody interested in a very low serial #, email me. #003 & #004 are spoken for and i think someone might take #5.....but #2 is now officially up for grabs. Hurts to have to do that, but had to be done right now. Something changes in the next few weeks, I will be back for it! Quote Link to comment Share on other sites More sharing options...
WillistonAudioLabs Posted May 15, 2013 Report Share Posted May 15, 2013 If I wasn't on the verge of selling/buying a house, I'd be all over #2... Quote See my videos on YouTube http://www.willistonaudio.com Many tests and demos of OLD and NEW SCHOOL car audio gear! See cool pics on Instagram @oldschoolstereo Link to comment Share on other sites More sharing options...
79 cutty Posted May 22, 2013 Report Share Posted May 22, 2013 Unless I have missed it posted someplace else, were you going to post up a video of the AD-1 in meter mode using the IM-SG to create the spectrum analyzer? Very interested in seeing this function!!! Need to see if I can move some funds around and pick one of these beasts up! I am not a shop, and have severly toned down the amount of installs I do, but a tool like this is first of all almost too cool/fun to pass up, and really creates such an opportunity to get the most out of the money we put into our cars in the first place. I like knowing my investments are being used to their full potential! Sorry to bump, but hadn't seen anything yet. Was still looking to see if there is, or will be a video showing more about using the AD-1 in conjunction with the IM-SG to create a spectrum analyzer? Very interested in this. Quote Firm believer in letting my cars do my talking! You can't rush quality, it doesn't happen overnight. Quality takes time and dedication, but the end results more than pay for it. "Black Pearl" Build Thread http://www.stevemeadedesigns.com/board/topic/67183-1985-buick-regal-limited-build-log/page-1 Link to comment Share on other sites More sharing options...
WillistonAudioLabs Posted August 27, 2013 Report Share Posted August 27, 2013 Ordered my AD-1 today!! I have a nice stash of amps to test...man it's gonna be fun, but I'm sure my 250A power supply will be a big limiting factor. That's cool, most of my old school amps consume well under 250A. Steve, if you see my AD-1 before it ships, please sign it. If not, that's cool, I'll just have you in the OSS labs / museum one day and you can do it then 2 Quote See my videos on YouTube http://www.willistonaudio.com Many tests and demos of OLD and NEW SCHOOL car audio gear! See cool pics on Instagram @oldschoolstereo Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.