JBLEEZE33 Posted September 20, 2011 Report Posted September 20, 2011 i have knu 0 gauge ran back to my extra battery in the back and my boston amps are supposed to take 4 gauge wire(2 pwr/2gnd per amp) but any name brand 4 gauge is too big and i have to cut a decent amount off it to force it in to fit.. so my question is would i be better to run a good name brand 8 gauge power and grounds from my back up battery straight to the amps instead off cutting down the 4 gauge so much.. what is the benefit/downside to doing this either way.. please help im a noob lol as you can see.. thanks.. also have big 3 down in knu 0 gauge also.. pioneer avic-n3 w ipod adapter clarion eq infinity kappa perfect 6.1 infinity kappa perfect 5.25 infinity kappa 6x9's 2 boston spg555's Boston acoustics gt-42 Boston acoustics gt-28 Boston acoustics gt-28 Big 3 Knu 0 gauge Optima battery
6berry Posted September 20, 2011 Report Posted September 20, 2011 i would say just use the 4 gauge and cut it down to fit it in. i had the same problem with my boston amps. 1999 Audi A4 1.8T::: 4 - DC Level 3 10's in a 4th order Rockford P6002 on Subs for now (3-3.5k coming eventually) MB Quart ONX4.60 for Mids and Highs Boston S50 Components in Front Boston S65 Coaxials in Rear 40 Sq Ft of Second Skin Damplifier Build Thread UBL 1948 Plymouth
JeremyN Posted September 20, 2011 Report Posted September 20, 2011 ive seen an adapter that is machined brass that will take a 0 AWG wire on one end and the other end is a 4AWG pin that you insert in to your amp .. I thing PG or stinger make on I would also check Street Wires if they are still around If not stripp the end of the wire and TIN the whole thind and then use a grinder head on a dremel tool and trim to size 2 12" Jeff Vue Customs 1 set MB Quart FSB 216 in doors1 American Bass 100.1 on sub1 Hertz EP2 on doorsJVC deck IPOD controlStock 105 amp alt DD-1big 3new build in Chevy caviler http://www.stevemead...chevy-cavalier/last set up in the ZX2 http://www.stevemead...-current-build/old build log http://www.stevemead...-1998-ford-zx2/ Gold is the money of kings, silver is the money of gentlemen, debt is the money of slaves. Just my .02c that shop needs keep those doors open so they have to charge for it if people think 10k is a lot then they should get into other hobbies.. like masturbating, cause any hobby cost money to maintain Lol no, I'm smarter than that bro haha. Fool me once, shame on you, fool me twice..............go fuck yourself lol
JBLEEZE33 Posted September 20, 2011 Author Report Posted September 20, 2011 Thanks guys.. any other opinions would be greatly appreciated pioneer avic-n3 w ipod adapter clarion eq infinity kappa perfect 6.1 infinity kappa perfect 5.25 infinity kappa 6x9's 2 boston spg555's Boston acoustics gt-42 Boston acoustics gt-28 Boston acoustics gt-28 Big 3 Knu 0 gauge Optima battery
vettedude102 Posted September 20, 2011 Report Posted September 20, 2011 I would get the adapter for it. That jeremy was talking about. My link This one in the link might work. The one below my post is better. 2 polk audio 4x6'skenwood head-unit 220 amp Mechman alt1979 Corvette 2003 corvette z06 alpine radio and the bose system that came stock
RickyFriery97 Posted September 20, 2011 Report Posted September 20, 2011 http://www.darvex.com/store/pc/Stinger-HPM-0-4-Gauge-Reducer-19p264.htm here is a 1/0 to 4 gauge reducer i would just trim the 4 gauge and make it fit 2014 Chevy Silverado Crewcab 1994 Chevy Full Size blazer
deeje Posted September 23, 2011 Report Posted September 23, 2011 Knukonceptz makes em to. So does toolmaker. --2004 Toyota 4runner New Build Log -2002 Acura Tl-S Old Build Log Team DC Audio spl dust is an option you can get on the coils... it's great for extra 1000 watts of power where can i get this spl dust and how much is it. is it hard to apply? lol
Recommended Posts
Archived
This topic is now archived and is closed to further replies.