Jump to content

Numatik's Bagged 2004 Silverado


Recommended Posts

Posted

NO HOSPITAL TRIP TODAY WOOT!!! Im doing much better now!

Gary 'Numatik' Eberle

West Sacramento, California

Vehicle build log (1) 'Aayla' Numatik's one and only, bodydropped pasted the doors Chevy S-20 Ext-Ext cab. This project ended after a horrible horrible motorcycle accident. There are so many mods it would fill an entire page in my sig. Check it out if you have A LOT of time to kill. http://www.stevemeadedesigns.com/board/topic/39785-numatiks-doored-s-20-bodydropped-on-doors-ext-ext-cab-10-subs-full-frame-build/?hl=%20numatik#39;s

Vehicle build log (2) 'Snow White' Daily/showstopper 2004 Chevy Silverado

Lays on 22s soon for 26s to run a beefy tire on 4s (4) 5gal tanks, (3)AZOB2 pumps, Slam digital stealth two speed valves with 16 solenoids, Slam SS bags all around, ART upper and lower arms, KP Components 6-link, KP Components watts link, Panther juice 6 22s, Spikes EVERYWHERE. 3,600WRMS total, (5) Kicker amps, (2) L7 15s under raised back seats, 15" screen molded to dash, 36 speakers total all Mb Quartz and Fosgate. Fiberglass console with removable face plates and arm rests, flushed speakers, lots of toggle switches, Playstation 2, rear view camera, Suede and leather seats, suede headliner, Dakota Digital air gauges, voltage gauges, and current draw gauges. (2) XS Power 4800 batteries, Whole truck is flat black and white and the

ENTIRE truck is fully pin striped by TJ Pagano here in Sacramento.

http://www.stevemeadedesigns.com/board/topic/123328-numatiks-bagged-2004-silverado/

smdsig1.png

"What doesn't kill you makes you stronger. I am proof" - Numatik

Posted

NO HOSPITAL TRIP TODAY WOOT!!! Im doing much better now!

awesome news gary!

YES! So stoked! Today im still pretty sore, but im gonna try and get some stuff done at least

Gary 'Numatik' Eberle

West Sacramento, California

Vehicle build log (1) 'Aayla' Numatik's one and only, bodydropped pasted the doors Chevy S-20 Ext-Ext cab. This project ended after a horrible horrible motorcycle accident. There are so many mods it would fill an entire page in my sig. Check it out if you have A LOT of time to kill. http://www.stevemeadedesigns.com/board/topic/39785-numatiks-doored-s-20-bodydropped-on-doors-ext-ext-cab-10-subs-full-frame-build/?hl=%20numatik#39;s

Vehicle build log (2) 'Snow White' Daily/showstopper 2004 Chevy Silverado

Lays on 22s soon for 26s to run a beefy tire on 4s (4) 5gal tanks, (3)AZOB2 pumps, Slam digital stealth two speed valves with 16 solenoids, Slam SS bags all around, ART upper and lower arms, KP Components 6-link, KP Components watts link, Panther juice 6 22s, Spikes EVERYWHERE. 3,600WRMS total, (5) Kicker amps, (2) L7 15s under raised back seats, 15" screen molded to dash, 36 speakers total all Mb Quartz and Fosgate. Fiberglass console with removable face plates and arm rests, flushed speakers, lots of toggle switches, Playstation 2, rear view camera, Suede and leather seats, suede headliner, Dakota Digital air gauges, voltage gauges, and current draw gauges. (2) XS Power 4800 batteries, Whole truck is flat black and white and the

ENTIRE truck is fully pin striped by TJ Pagano here in Sacramento.

http://www.stevemeadedesigns.com/board/topic/123328-numatiks-bagged-2004-silverado/

smdsig1.png

"What doesn't kill you makes you stronger. I am proof" - Numatik

Posted

I added the tweeters to the center console, AND it rapes. Loud as fuck. Im gonna have a 3sixty in soon hopefully and that should help. To get my volume the gains are up a bit, little bit of distortion but not much. But its loud. I am pleased. I'll take a video in the next few days if people want. And I need to snap pics of the final result, and again, im very pleased :)

Gary 'Numatik' Eberle

West Sacramento, California

Vehicle build log (1) 'Aayla' Numatik's one and only, bodydropped pasted the doors Chevy S-20 Ext-Ext cab. This project ended after a horrible horrible motorcycle accident. There are so many mods it would fill an entire page in my sig. Check it out if you have A LOT of time to kill. http://www.stevemeadedesigns.com/board/topic/39785-numatiks-doored-s-20-bodydropped-on-doors-ext-ext-cab-10-subs-full-frame-build/?hl=%20numatik#39;s

Vehicle build log (2) 'Snow White' Daily/showstopper 2004 Chevy Silverado

Lays on 22s soon for 26s to run a beefy tire on 4s (4) 5gal tanks, (3)AZOB2 pumps, Slam digital stealth two speed valves with 16 solenoids, Slam SS bags all around, ART upper and lower arms, KP Components 6-link, KP Components watts link, Panther juice 6 22s, Spikes EVERYWHERE. 3,600WRMS total, (5) Kicker amps, (2) L7 15s under raised back seats, 15" screen molded to dash, 36 speakers total all Mb Quartz and Fosgate. Fiberglass console with removable face plates and arm rests, flushed speakers, lots of toggle switches, Playstation 2, rear view camera, Suede and leather seats, suede headliner, Dakota Digital air gauges, voltage gauges, and current draw gauges. (2) XS Power 4800 batteries, Whole truck is flat black and white and the

ENTIRE truck is fully pin striped by TJ Pagano here in Sacramento.

http://www.stevemeadedesigns.com/board/topic/123328-numatiks-bagged-2004-silverado/

smdsig1.png

"What doesn't kill you makes you stronger. I am proof" - Numatik

Posted

Sick ass truck bro

Thanks man, still innovating! :santa:

Gary 'Numatik' Eberle

West Sacramento, California

Vehicle build log (1) 'Aayla' Numatik's one and only, bodydropped pasted the doors Chevy S-20 Ext-Ext cab. This project ended after a horrible horrible motorcycle accident. There are so many mods it would fill an entire page in my sig. Check it out if you have A LOT of time to kill. http://www.stevemeadedesigns.com/board/topic/39785-numatiks-doored-s-20-bodydropped-on-doors-ext-ext-cab-10-subs-full-frame-build/?hl=%20numatik#39;s

Vehicle build log (2) 'Snow White' Daily/showstopper 2004 Chevy Silverado

Lays on 22s soon for 26s to run a beefy tire on 4s (4) 5gal tanks, (3)AZOB2 pumps, Slam digital stealth two speed valves with 16 solenoids, Slam SS bags all around, ART upper and lower arms, KP Components 6-link, KP Components watts link, Panther juice 6 22s, Spikes EVERYWHERE. 3,600WRMS total, (5) Kicker amps, (2) L7 15s under raised back seats, 15" screen molded to dash, 36 speakers total all Mb Quartz and Fosgate. Fiberglass console with removable face plates and arm rests, flushed speakers, lots of toggle switches, Playstation 2, rear view camera, Suede and leather seats, suede headliner, Dakota Digital air gauges, voltage gauges, and current draw gauges. (2) XS Power 4800 batteries, Whole truck is flat black and white and the

ENTIRE truck is fully pin striped by TJ Pagano here in Sacramento.

http://www.stevemeadedesigns.com/board/topic/123328-numatiks-bagged-2004-silverado/

smdsig1.png

"What doesn't kill you makes you stronger. I am proof" - Numatik

Posted

Hey guys, I just started a new thread topic that i couldnt find anywhere else on the forum (correct me if im wrong, but I started the thread) its about highs, and trying to get users to upload there clean highs songs and hopefully some audacity users will post cleaned up songs:

http://www.stevemeadedesigns.com/board/topic/128322-post-you-clear-sq-songs-that-rape-on-highs/

Gary 'Numatik' Eberle

West Sacramento, California

Vehicle build log (1) 'Aayla' Numatik's one and only, bodydropped pasted the doors Chevy S-20 Ext-Ext cab. This project ended after a horrible horrible motorcycle accident. There are so many mods it would fill an entire page in my sig. Check it out if you have A LOT of time to kill. http://www.stevemeadedesigns.com/board/topic/39785-numatiks-doored-s-20-bodydropped-on-doors-ext-ext-cab-10-subs-full-frame-build/?hl=%20numatik#39;s

Vehicle build log (2) 'Snow White' Daily/showstopper 2004 Chevy Silverado

Lays on 22s soon for 26s to run a beefy tire on 4s (4) 5gal tanks, (3)AZOB2 pumps, Slam digital stealth two speed valves with 16 solenoids, Slam SS bags all around, ART upper and lower arms, KP Components 6-link, KP Components watts link, Panther juice 6 22s, Spikes EVERYWHERE. 3,600WRMS total, (5) Kicker amps, (2) L7 15s under raised back seats, 15" screen molded to dash, 36 speakers total all Mb Quartz and Fosgate. Fiberglass console with removable face plates and arm rests, flushed speakers, lots of toggle switches, Playstation 2, rear view camera, Suede and leather seats, suede headliner, Dakota Digital air gauges, voltage gauges, and current draw gauges. (2) XS Power 4800 batteries, Whole truck is flat black and white and the

ENTIRE truck is fully pin striped by TJ Pagano here in Sacramento.

http://www.stevemeadedesigns.com/board/topic/123328-numatiks-bagged-2004-silverado/

smdsig1.png

"What doesn't kill you makes you stronger. I am proof" - Numatik

Posted

HO HO HO Marry Christmas by Numatik!!

DSCN4261.jpg

DSCN4262.jpg

DSCN4263.jpg

DSCN4264.jpg

- 18 gauge sheetmetal slay 1" wider in rear for "aerodynamics"

- Slay hammered on 1 1/2"DOM pipe for contour

- Hand rolled 1/8" round bar sled trim

- 1/8in galvanized 1 1/4" round tube for candle holder

- Snowmen holesawed and grinded smooth

- Plug weld "buttons" on snowmen

- 8mm hex eyes flushed and smoothed

- 9mm x 3/4" nose

- 1/8" round bar arms

- 1/8" circle bottom support plate

- 2x4" 3/16" tube podium

- All polished to raw raw metal :)

Some small imperfections but I like it, makes it unique and a reminder that I build every piece by scratch

Alot of work for two xmas presents huh? Took a day and a half off the trucks to fab these. I like them, what do you guys think?

Gary 'Numatik' Eberle

West Sacramento, California

Vehicle build log (1) 'Aayla' Numatik's one and only, bodydropped pasted the doors Chevy S-20 Ext-Ext cab. This project ended after a horrible horrible motorcycle accident. There are so many mods it would fill an entire page in my sig. Check it out if you have A LOT of time to kill. http://www.stevemeadedesigns.com/board/topic/39785-numatiks-doored-s-20-bodydropped-on-doors-ext-ext-cab-10-subs-full-frame-build/?hl=%20numatik#39;s

Vehicle build log (2) 'Snow White' Daily/showstopper 2004 Chevy Silverado

Lays on 22s soon for 26s to run a beefy tire on 4s (4) 5gal tanks, (3)AZOB2 pumps, Slam digital stealth two speed valves with 16 solenoids, Slam SS bags all around, ART upper and lower arms, KP Components 6-link, KP Components watts link, Panther juice 6 22s, Spikes EVERYWHERE. 3,600WRMS total, (5) Kicker amps, (2) L7 15s under raised back seats, 15" screen molded to dash, 36 speakers total all Mb Quartz and Fosgate. Fiberglass console with removable face plates and arm rests, flushed speakers, lots of toggle switches, Playstation 2, rear view camera, Suede and leather seats, suede headliner, Dakota Digital air gauges, voltage gauges, and current draw gauges. (2) XS Power 4800 batteries, Whole truck is flat black and white and the

ENTIRE truck is fully pin striped by TJ Pagano here in Sacramento.

http://www.stevemeadedesigns.com/board/topic/123328-numatiks-bagged-2004-silverado/

smdsig1.png

"What doesn't kill you makes you stronger. I am proof" - Numatik

Posted

Looks cool to me!

I may hit you up to weld up some stuff for my mom. She lives in the hills in Vacaville and has to drive her garbage cans down the hill every week. Every other week, it's two, and then other weeks its one. But I was thinking something light, like aluminum if you can weld that, and it could be a hitch as well so it can slide into the hitch spot on the back of her van. Then rise up about 2' and have a little hanger to put the handles on. What do you think?

I thought aluminum so she could easily take it off the van when shes done.

Sorry to jack a little.

Posted

HO HO HO Marry Christmas by Numatik!!

DSCN4261.jpg

DSCN4262.jpg

DSCN4263.jpg

DSCN4264.jpg

- 18 gauge sheetmetal slay 1" wider in rear for "aerodynamics"

- Slay hammered on 1 1/2"DOM pipe for contour

- Hand rolled 1/8" round bar sled trim

- 1/8in galvanized 1 1/4" round tube for candle holder

- Snowmen holesawed and grinded smooth

- Plug weld "buttons" on snowmen

- 8mm hex eyes flushed and smoothed

- 9mm x 3/4" nose

- 1/8" round bar arms

- 1/8" circle bottom support plate

- 2x4" 3/16" tube podium

- All polished to raw raw metal :)

Some small imperfections but I like it, makes it unique and a reminder that I build every piece by scratch

Alot of work for two xmas presents huh? Took a day and a half off the trucks to fab these. I like them, what do you guys think?

Thats Bad-ass bro, definitely makes a hell of a nice X-mas gift!

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members (See full list)

    • There are no registered users currently online
×
×
  • Create New...