CJ18 Posted January 11, 2012 Report Posted January 11, 2012 I have one for my 10" tsns build, once my subs and amp get here ill make a new one. I'll probably end up with a 4th order blow through but I'm gonna try a wall first, see if I can even make it fit lol. haha ya i think a 4th order would be the way to go man so damn musical and they get down on numbers too that willl be sick lol How long are your power and ground runs going to have to be to get into the truck to the amps? they will be 3-3 1/2 ft. thats as short as i can get them lol im going straight through the vertical side of the bed then straight through the rear of the cab right to the amps With as long as those runs have to be, I would almost consider the triple inputs that toolmaker is doing for these amps. One thing I was told and adjusted on mine, is at first I had all of my power wire going to my amps coming off of the same spot on my buss bars. Once I spread out the wire across the bussbars, my voltage drop wasnt as bad. I was drawing so much on that one battery instead of spreading the draw throughtout the whole bank.
kryptonite Posted January 11, 2012 Report Posted January 11, 2012 Thread jack: should all runs be equadistant to each other from the bank to the amp? DC SOUND LAB NUT HUGGERCurrently Own 4 - 18" lvl 6s (m3) w/full Carbon Fiber option 2 - DC 5k lvl 4 motor lvl 2 motor On 8/2/2013 at 8:13 PM, n8ball2013 said: this is much worse. Its old n8 without the time or patience to hold fucking hands. I'm supposed to be doing school work but yet here i am making sure jr fuck fuck isn't trying to poke the other kids with a stick.
skyhighcaraudio Posted January 11, 2012 Author Report Posted January 11, 2012 ^^I have no idea. i would say no as long as they are close. The ft difference for instance my amps will see from far right on the rear amp to far left inputs on the front amp shouldnt make a difference. i mean current travels so damn fast its insane and over a ft i bets its like a nanosecond difference. i guess on my bus bars in the bed all the leads cannot all be at the exact same place so i guess i could move the leads which are closest to the amps down the bus bars so they are a lot closer to all the same length. that would work well to make them real close. but bottom line i have no idea lol Someone else please chimp in who knows better than me sorry man Contact us for the best quality cables and accessories with the fastest shipping in the industry EMAIL: [email protected]<script data-cfhash='f9e31' type="text/javascript"> /* */</script> LIKE US ON FB: https://www.facebook.com/SkyHighCarAudio ADD ME ON FB: https://www.facebook.com/jon.rabe.1 MONSTER SKY HIGH/DC GMC: http://www.stevemeadedesigns.com/board/topic/127057-sky-high-monster-gmc-walk-through-12-lvl-5-15s-6-9ks-trim-panels-and-wiring-p-90/
skyhighcaraudio Posted January 11, 2012 Author Report Posted January 11, 2012 So after a long ass time of trying to fabric this thing i got it pretty damn close there are some spots that has to be sanded out but damn it fought me...then again i knew that was gonna happen but its there now and gonna go test fit it to make sure it still fits before the resin goes on...ill post some test fit pics too CUt out the wholes needed: This is was a fun one to cover with fabric.... Also got all the baskets done lol Contact us for the best quality cables and accessories with the fastest shipping in the industry EMAIL: [email protected]<script data-cfhash='f9e31' type="text/javascript"> /* */</script> LIKE US ON FB: https://www.facebook.com/SkyHighCarAudio ADD ME ON FB: https://www.facebook.com/jon.rabe.1 MONSTER SKY HIGH/DC GMC: http://www.stevemeadedesigns.com/board/topic/127057-sky-high-monster-gmc-walk-through-12-lvl-5-15s-6-9ks-trim-panels-and-wiring-p-90/
kryptonite Posted January 11, 2012 Report Posted January 11, 2012 Damn the center console looks awesome like that! Painting it black with white splatter I assume? DC SOUND LAB NUT HUGGERCurrently Own 4 - 18" lvl 6s (m3) w/full Carbon Fiber option 2 - DC 5k lvl 4 motor lvl 2 motor On 8/2/2013 at 8:13 PM, n8ball2013 said: this is much worse. Its old n8 without the time or patience to hold fucking hands. I'm supposed to be doing school work but yet here i am making sure jr fuck fuck isn't trying to poke the other kids with a stick.
skyhighcaraudio Posted January 11, 2012 Author Report Posted January 11, 2012 ^^ just gonna be back lol too much splatter paint if i did the whole console i think it may have spaltter paint on it but just like writing idk we will see. Contact us for the best quality cables and accessories with the fastest shipping in the industry EMAIL: [email protected]<script data-cfhash='f9e31' type="text/javascript"> /* */</script> LIKE US ON FB: https://www.facebook.com/SkyHighCarAudio ADD ME ON FB: https://www.facebook.com/jon.rabe.1 MONSTER SKY HIGH/DC GMC: http://www.stevemeadedesigns.com/board/topic/127057-sky-high-monster-gmc-walk-through-12-lvl-5-15s-6-9ks-trim-panels-and-wiring-p-90/
FieroGrande Posted January 11, 2012 Report Posted January 11, 2012 Those amps look sexy like that and the console is going to be fun to sand.
kbsmoker Posted January 11, 2012 Report Posted January 11, 2012 Cooming along nicely www.dcsoundlab.comyoutube video's kbsmoker2011 MECAOH AS3 Champ 147.5OH DB2 Champ 125.9WF AS3 3rd 147.3WF DB3 2nd 128.3 SystemPioneer AVH-P4300DVD2 sets Fusion Encounter 6.5 componentson Crunch Ground Pounder 1200.418" DC NEO on DC 5.0KKnukonceptz 1/0 through outBig 3 all 1/0XS D6500under hood D3100 in the backMechman 270....rebuilt by Ohio Generator
Lbox88 Posted January 11, 2012 Report Posted January 11, 2012 What kind of sander do you have btw? I just bought a brand new orbital Ridgid from HD (Gift cards ftw) and they still come with a lifetime warranty, thought that was kind of amazing compared to others lol. Think it was about $60~$70 before the gift cards. UBL | Build Log
CJ18 Posted January 11, 2012 Report Posted January 11, 2012 ^^I have no idea. i would say no as long as they are close. The ft difference for instance my amps will see from far right on the rear amp to far left inputs on the front amp shouldnt make a difference. i mean current travels so damn fast its insane and over a ft i bets its like a nanosecond difference. i guess on my bus bars in the bed all the leads cannot all be at the exact same place so i guess i could move the leads which are closest to the amps down the bus bars so they are a lot closer to all the same length. that would work well to make them real close. but bottom line i have no idea lol Someone else please chimp in who knows better than me sorry man Here is the way it was explained to me by Mike Singer. You will have 12 runs of power running into the truck from the batteries, 6 to each amp. If you have say 10 batteries connected together in a row by buss bars. You are now running all of your power wire into the driver side of the truck. If you were to run all 12 wires off of the 3-4 batteries on the left side of the bank, you are going to draw more on those few batteries and not as much on the other 6 on the other side of the bank. If you were to spread out the runs over the entire bank of batteries, you are now drawing evenly across all of the batteries instead of focusing all of the draw on just part of the bank. If you focus on just one part of the bank, you will still use the other batteries, but you will be drawing harder on just those 3-4 instead of dispersing the load evenly across all of the batteries.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.