FroznBeavrBALLs Posted December 7, 2011 Report Posted December 7, 2011 if you can find the holes then just drill through it. then there will be a hole. haha Quote 2 DC 12" lvl 4s 1 DC 1.2k XS Power S3400 big 3 Alll KNU wire Pioneer HU cheapo Legacy coaxes (just for now) http://www.stevemead...n-sentra-build/
dyablo409 Posted December 7, 2011 Report Posted December 7, 2011 What i did was just get a nail and punch through it hope that helps Quote
bassahaulic Posted December 7, 2011 Report Posted December 7, 2011 Wow, the first few people who replied are complete fucking morons. I always just put a screw through the hole. Quote
iKidwell Posted December 7, 2011 Report Posted December 7, 2011 Wow, the first few people who replied are complete fucking morons. I always just put a screw through the hole. Or they just never had new Subs from dc Just get anything really sharp and cut through Quote c'mon now, if i was shooting an 8 year old, it wouldnt be MY 8 year old. i recently got a Pyle PL1590BL and i was building an enclosure for it tuned to 25 hz. i didn't have any tools to cut a circle so i hit it with a big hammer. 2003 Infiniti G35 Sport Sedan Build in Progress
SnowDrifter Posted December 7, 2011 Author Report Posted December 7, 2011 Wow, the first few people who replied are complete fucking morons. I always just put a screw through the hole. I'm using t-nuts to mount it though. I actually need a sizeable hole Quote ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444
FroznBeavrBALLs Posted December 7, 2011 Report Posted December 7, 2011 i realized what he was talking about after i posted my answer. i have had new subs form DC but mine had it where they poked the hole through before they gave it to me. Quote 2 DC 12" lvl 4s 1 DC 1.2k XS Power S3400 big 3 Alll KNU wire Pioneer HU cheapo Legacy coaxes (just for now) http://www.stevemead...n-sentra-build/
CortezDTV Posted December 7, 2011 Report Posted December 7, 2011 I use loong drywall screws with little washers so it can't ever catch with reinforements insidethe surround Otherwize just poke till u fine the hole Quote SCSB Santa Cruz Speaker Box Build logs: Daily Driver Lemon Marquis 2 american bass 750.1s 350.4 on 14 focal 6.5s sq 945 on 4 hertz tweeters Mystery subs http://www.stevemead...__fromsearch__1 The Mustang 'dubbed' Shirley the project from bullet holes to badass http://www.stevemead...cond-skin-time/
SnowDrifter Posted December 7, 2011 Author Report Posted December 7, 2011 One of the guys over on caco suggested using a drill bit in reverse to spread the threads without grabbing it. Seemed to work pretty darn wekk. Just go slow Quote ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444
Whothennow Posted December 7, 2011 Report Posted December 7, 2011 X2. Bit in reverse FTW. Same process as drilling holes in Leather or vinyl door panels. Quote
audiofanaticz Posted December 7, 2011 Report Posted December 7, 2011 best way is to drill thru the basket mounting holes that are filled with ca glue and the surround. Drill from the bottom or back side towards the front/top. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.