Slippy Posted April 2, 2012 Report Share Posted April 2, 2012 Can Skar vvx 12's accept 8 guage knuconceptz wire without trimming any of the wire to fit in the push terminals? Link to comment Share on other sites More sharing options...
MaliBOOM Posted April 2, 2012 Report Share Posted April 2, 2012 I'll go with a no. I tried to use stinger 8 gauge and it was a nightmare. Stick with 12gauge and you will be just fine www.TheAutoSkin.com MaliBOOM v2"2010 Bagged Malibu on 20s"<< click here<<< Excursion on 42s Build log<<Click here<<< Instagram-@theAutoSkinRyan @TheAutoSkin Owner of The Auto Skin Link to comment Share on other sites More sharing options...
OBI Posted April 2, 2012 Report Share Posted April 2, 2012 There is no need to use 8awg for this sub. Link to comment Share on other sites More sharing options...
MaliBOOM Posted April 2, 2012 Report Share Posted April 2, 2012 There is no need to use 8awg for this sub. This www.TheAutoSkin.com MaliBOOM v2"2010 Bagged Malibu on 20s"<< click here<<< Excursion on 42s Build log<<Click here<<< Instagram-@theAutoSkinRyan @TheAutoSkin Owner of The Auto Skin Link to comment Share on other sites More sharing options...
stevog Posted April 2, 2012 Report Share Posted April 2, 2012 you need to trim it down alot i used some on a sundown 12 Link to comment Share on other sites More sharing options...
Slippy Posted April 2, 2012 Author Report Share Posted April 2, 2012 Thanks guys! I'll try my 10 or 12 guage when my subs get here Link to comment Share on other sites More sharing options...
jmanjr82 Posted April 2, 2012 Report Share Posted April 2, 2012 8 guage cadence fits though Link to comment Share on other sites More sharing options...
Freshman6969 Posted April 2, 2012 Report Share Posted April 2, 2012 i can make knu 1/0 fit in there, you just gotta trim it Legal TL scores145.6 on the dash sealed up in the low 40hz area with the port out145.5 on the dash sealed up @30hz with the port inless then 1k clamped on a 3.5k! Why would you EVER WANT flex?huh?...flex is what can make the lows lower and more air being pushed correct? My FeedbackJeep-BuildlogPT LOSER buildlog Link to comment Share on other sites More sharing options...
Sheena Posted April 2, 2012 Report Share Posted April 2, 2012 i can make knu 1/0 fit in there, you just gotta trim it a lot. lol. 09 Civic EX KDC-X395 (2) SKAR Audio VVX-12 Skar Audio SK-1500.1 4 cu ft @32 (new box and more port soon) Firing Forward not sealed off Stock 80 Amp Alt Big 3 In 1/0 Knu 2 Runs To The Back 1 Pos 1 Neg In 1/0 Knu DD-1'd 13.8v drop Link to comment Share on other sites More sharing options...
412 CVX Posted April 2, 2012 Report Share Posted April 2, 2012 12 gauge should be the max you'd need Just say no to Ground Pounder Customs. My temp system build log More box buildssome cars do over 170db with one sub, so clearly my two 12"s can do that in my car, with my knowledge too! look out bitches! I'm with captain stupid. Link to comment Share on other sites More sharing options...
Recommended Posts