Ian Stith Posted April 15, 2012 Author Report Share Posted April 15, 2012 So how you might want to get it working is first plug it in to see if it works, If it doesn't work check if the fuse works. If it does, your input will have to be an RCA. Chose the speaker that you want to use, find out its ohms, then set the ohm selector to the proper ohm(age) then set the 901 or other to other since you wont be using the Bose 901s.... that should work. I would recommend starting the volume at minimum and work your way up. it doesnt work but i did plug it in to see. fuse wouldnt come out tho. i really wanna get it going tho I think that you need to get the fuse out somehow, or i cant be much help... Good luck for what it is worth Im a broke student. still manage to have a pretty good system though.. (at least i think) Link to comment Share on other sites More sharing options...
KiKaZz74 Posted April 15, 2012 Report Share Posted April 15, 2012 got it!! it works theres a hidden button on it. the 901's subs are blown. but the tweeters sound amazing still. i really need to get them fixed. but after getting it set up and running it sounds really good. i just pushed it to hard a few mins ago and it went into protect mode and overheated. but im running like 400-500watts off each side. it doesnt sound distorted at all with the bass all the way up. ill get pics of my redneck system if anyone wants it. 3 wires down into 1 =] per side My SPL to SQ Build Log Vehicle:1997 Dodge Dakota Ext Cab 4x4 2009 Dodge Journey SXT5.2L V8 Magnum 3.5L V6 Stock AltEquipment: Headunit- Alpine CDE-147BT Mids/Highs Amp- JL Audio G6600 Class AB 6 Channel Sub Amp- Hifonics BRZ1700.1D @ 2 Ohms Taramps DSP3000.1D Sub- Hertz Hi Energy 12" HX300D SounDrive SDA3 12 Tweeters- Rockford Fosgate Power Series Silk Domes Hertz Hi-Energy Mids- Dayton Audio Reference 4" Full Range Drivers Midbass- Silver Flute 6.5" Hertz Hi-Energy 6.5" Processor- MiniDSP 2x4 RCA- 6 channels of SounDrive HF series Wire- EB Flex 2/0 -Member of Team SounDrive Link to comment Share on other sites More sharing options...
kirill007 Posted April 19, 2012 Report Share Posted April 19, 2012 This is the most powerfull amp i have. Vintage CLEAN power. http://www.allegroso...nsui_B2101.html 260W at 8 ohms per channel (it's a 2channel.) 350W at 4 ohms per channel . Both of those numbers with only 0.003% of THD. These are some serious numbers. You can go to 1% THD before the amps goes into protection mode, just before that point it makes about 320W at 8 ohms. ANd yes you can bridge this beast. All class A/B power. Impressive amplifier you got there Agreed, what do you use it for currently? Nothing, it's just sitting there, i have better sounding amps, and all that power is too much in house. Thinking is the root of all problems... You ALWAYS get what you pay for. Link to comment Share on other sites More sharing options...
Ian Stith Posted April 22, 2012 Author Report Share Posted April 22, 2012 got it!! it works theres a hidden button on it. the 901's subs are blown. but the tweeters sound amazing still. i really need to get them fixed. but after getting it set up and running it sounds really good. i just pushed it to hard a few mins ago and it went into protect mode and overheated. but im running like 400-500watts off each side. it doesnt sound distorted at all with the bass all the way up. ill get pics of my redneck system if anyone wants it. 3 wires down into 1 =] per side Cool, hope it sounds good for years to come! that is A LOT of in house power. I would highly recommend getting the 901s fixed. Im a broke student. still manage to have a pretty good system though.. (at least i think) Link to comment Share on other sites More sharing options...
stroupe79 Posted April 22, 2012 Report Share Posted April 22, 2012 whoever had the old school BOSE...its a Spatial Control Reciever...here is a link to get the owners manual for it http://worldwide.bose.com/productsupport/en_us/web/scr/page.html http://www.stevemead...cherokee-build/ 2005 Jeep Grand Cherokee Alpine CDE-hd148bt Alpine PKG-RSE2 PRV Audio (4) 6MB200 front/rear doors PRV Audio (4) TW350Ti dash/rear doors Kicker KX350.4 Obsidian Audio (1) 18 D4 v2 revamp (2) Stereo Integrity HT 18d2DC Audio 1.2k5.25ft^3 tuned @34hz revamp Infinite Baffle Cpillar AudioTechnix 60mil deadenerKnuKonceptz & SkyHigh wire (complete setup) Link to comment Share on other sites More sharing options...
stroupe79 Posted April 22, 2012 Report Share Posted April 22, 2012 ghetto system would be classified as putting your home subwoofer box into your trunk wired straight into the rear factory wiring... http://www.stevemead...cherokee-build/ 2005 Jeep Grand Cherokee Alpine CDE-hd148bt Alpine PKG-RSE2 PRV Audio (4) 6MB200 front/rear doors PRV Audio (4) TW350Ti dash/rear doors Kicker KX350.4 Obsidian Audio (1) 18 D4 v2 revamp (2) Stereo Integrity HT 18d2DC Audio 1.2k5.25ft^3 tuned @34hz revamp Infinite Baffle Cpillar AudioTechnix 60mil deadenerKnuKonceptz & SkyHigh wire (complete setup) Link to comment Share on other sites More sharing options...
Ian Stith Posted April 22, 2012 Author Report Share Posted April 22, 2012 ghetto system would be classified as putting your home subwoofer box into your trunk wired straight into the rear factory wiring... Nah that's just stupid Im a broke student. still manage to have a pretty good system though.. (at least i think) Link to comment Share on other sites More sharing options...
KiKaZz74 Posted April 23, 2012 Report Share Posted April 23, 2012 Anyone know the rating on the bose? Like watt wise. I wanna find out and I'll use inverter in my car to run it My SPL to SQ Build Log Vehicle:1997 Dodge Dakota Ext Cab 4x4 2009 Dodge Journey SXT5.2L V8 Magnum 3.5L V6 Stock AltEquipment: Headunit- Alpine CDE-147BT Mids/Highs Amp- JL Audio G6600 Class AB 6 Channel Sub Amp- Hifonics BRZ1700.1D @ 2 Ohms Taramps DSP3000.1D Sub- Hertz Hi Energy 12" HX300D SounDrive SDA3 12 Tweeters- Rockford Fosgate Power Series Silk Domes Hertz Hi-Energy Mids- Dayton Audio Reference 4" Full Range Drivers Midbass- Silver Flute 6.5" Hertz Hi-Energy 6.5" Processor- MiniDSP 2x4 RCA- 6 channels of SounDrive HF series Wire- EB Flex 2/0 -Member of Team SounDrive Link to comment Share on other sites More sharing options...
kirill007 Posted April 28, 2012 Report Share Posted April 28, 2012 100 watt per channel if you looked at the link stroupe posted. So not the 400-500 watt you were expecting. 100W per channel is quite a lot for a old-school amp. Thinking is the root of all problems... You ALWAYS get what you pay for. Link to comment Share on other sites More sharing options...
KiKaZz74 Posted April 28, 2012 Report Share Posted April 28, 2012 ^^ its not on there. and I don't wanna fill the stuff out to get a manual. But then tell me how it is 100w when I'm running 500w off each side and it hits harder and cleaner then my 200w each side stereo?... My SPL to SQ Build Log Vehicle:1997 Dodge Dakota Ext Cab 4x4 2009 Dodge Journey SXT5.2L V8 Magnum 3.5L V6 Stock AltEquipment: Headunit- Alpine CDE-147BT Mids/Highs Amp- JL Audio G6600 Class AB 6 Channel Sub Amp- Hifonics BRZ1700.1D @ 2 Ohms Taramps DSP3000.1D Sub- Hertz Hi Energy 12" HX300D SounDrive SDA3 12 Tweeters- Rockford Fosgate Power Series Silk Domes Hertz Hi-Energy Mids- Dayton Audio Reference 4" Full Range Drivers Midbass- Silver Flute 6.5" Hertz Hi-Energy 6.5" Processor- MiniDSP 2x4 RCA- 6 channels of SounDrive HF series Wire- EB Flex 2/0 -Member of Team SounDrive Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.