No Screws?

[stevh0]

I see alot of you guys use no screws ...

honestly i dont know how your setup stays together ...

[dmanson]

a lot of guys might just use nail guns along with some fiberglassing.

[Derrick824]

Its pretty common to use a brad nailer to tack pieces together while the glue dries. After glassin, that bish ain't comin apart. I personally prefer using screws, joint bracing, and a lot of glue cause I don't like glass-work.

[FCsteve]

i use clamps to hold it solid while the wood glue dries, then its all fiberglass holding it together after that. ive never had any problems with any box i've made.

[David]

if you use goood wood glue and tack it together with brad nails, it aint comming apart unless the wood breaks.

[joey2714]

x2 i have just used brad nails and glue forever and never had a single problem. Next box is getting gkassed inside though

[Torres]

i'm paranoid i guess. i still use a few screws i feel safer heheh

[Guest MegaloManiac]

if you use goood wood glue and tack it together with brad nails, it aint comming apart unless the wood breaks.

fosho when using good wood glue it will not come apart when dried/cured because it forms a chemical bond now. shit i have tried ripping apart some of my boxes and when it does come apart it doesnt come apart where the glue joint is shit is tough

[WickedToys1]

i'm paranoid i guess. i still use a few screws i feel safer heheh

x2

just glue and brad nails is pretty strong, but i will put just 2 or 3 screws on each of the sides just to be safe. plus the glass on the inside on some of my boxes.

[kingsuv]

I screw the shit outta mine. Along with brad nails,glue, and glass.

I just countersink the holes and fill over them with wood filler.