jballin2010 Posted April 23, 2012 Report Posted April 23, 2012 ok i got my two dual 1 BTL's wired to .5 ohm on a MMATS 3500.05 and it get loud but is (out of sync) almost seems.. on low notes it is bad! almost seems to be popping back and forth. any suggestions?? thanks! and even when i turn the amp down it does it after turning the volume up. Quote
01ExSport Posted April 23, 2012 Report Posted April 23, 2012 Reversed a VC on one of the subs? Meh? Quote
Shankkilla420 Posted April 23, 2012 Report Posted April 23, 2012 Wait are you saying that when the bass hits its continuing to go after the note stops? Cause if so your RCAs aren't grounded anymore. I just had to fix that on my Kenwood hu... Quote
LZTYBRN Posted April 23, 2012 Report Posted April 23, 2012 (edited) One of your subs is wired backwards. Either that or one of em is dead and acting as a passive radiator. We have a bigger problem. You can't wire two dual 1 ohm subs to .5 ohms... Hope you're not actually wired at .25. Edited April 23, 2012 by LZTYBRN Quote
jballin2010 Posted April 23, 2012 Author Report Posted April 23, 2012 *dual 2's my fault. and no its not continuing to play after, the subs are just off beat, even when i wired it to 2 ohms.. but they didnt do this with my Alpine mrp-2000 amp (with the subs wired at 2 ohms). it did this right after i put the new MMATS on them Quote
littlebuck1919 Posted April 23, 2012 Report Posted April 23, 2012 out of phase??? Quote Feedback Thread: http://www.stevemeadedesigns.com/board/topic/152368-littlebuck1919s-feedback/#entry2177586 i think you'd stick your dick in a blender if it told you it was 40 wtih two kids your age. lol 6/18/82 - 4/17/12 R.I.P. to my sister Shana
Brandon_4078 Posted April 23, 2012 Report Posted April 23, 2012 Like there not hitting right went they should be? Or there hitting opposite of each other? Quote "The only man who makes no mistakes is the man who never does anything" -Theodore Roosevelt
jballin2010 Posted April 23, 2012 Author Report Posted April 23, 2012 seems to be opposite... for instance, "white girl" has the nice low note that pounded with my old amp. now it like seems to just "rumble" on that note. Quote
SnowDrifter Posted April 23, 2012 Report Posted April 23, 2012 Play 3 hz and see if the subs move equally, or opposite Quote ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444
TrentonLong Posted April 23, 2012 Report Posted April 23, 2012 (edited) do you have the subs wired together? like this or like this Edit: Sorry it's a mono amp so i take it its wired like the first one Edited April 23, 2012 by TrentonLong Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.