corona_jeff Posted November 10, 2013 Report Share Posted November 10, 2013 Berger>Dom.......I'm still baffled by the 15.8v set point on alts that has a max charge point of 16.8 Link to comment Share on other sites More sharing options...
RossGo Posted November 10, 2013 Report Share Posted November 10, 2013 Drew up a rough estimate of my cowl cell ideaIt was only like 5 gallons...Carry on haha Yes I have a lot of stereo weight. I build for Smiles Per Gallon not Miles Per Gallon LOLZ My build - 1996 4Runner with 2 18s - 149+ in a sealed box (with radiators) Link to comment Share on other sites More sharing options...
boom50cal Posted November 11, 2013 Report Share Posted November 11, 2013 Front bumper tank. or rear bumper tank. Iirc there is kits that convert jeep rear bumpers into water tanks... On 1/4/2013 at 9:31 PM, HatersGonnaHate said: Wow. 184 posts and I think you're a fucking asshole. Link to comment Share on other sites More sharing options...
RossGo Posted November 11, 2013 Report Share Posted November 11, 2013 According to Trippi, he will be driving it around 100 milesAssuming that is one way, he would need at LEAST a 40 gallon tank.That would be an ugly bumper Yes I have a lot of stereo weight. I build for Smiles Per Gallon not Miles Per Gallon LOLZ My build - 1996 4Runner with 2 18s - 149+ in a sealed box (with radiators) Link to comment Share on other sites More sharing options...
nocturnalrites101 Posted November 11, 2013 Report Share Posted November 11, 2013 that would also be an enormous saft hazard lmfao. wait your not the guy on facebook hes always fighting with called monsta are you? Link to comment Share on other sites More sharing options...
boom50cal Posted November 11, 2013 Report Share Posted November 11, 2013 Honestly, a tank/bumper built out of 3/16th wall steel isn't going to be that unsafe lol. I'm not good in sketchup or I'd fab one up in it... But take a RoadArmor bumper for example, HUGE AS FUCK, easily 15-20 gallons of internal space there. On 1/4/2013 at 9:31 PM, HatersGonnaHate said: Wow. 184 posts and I think you're a fucking asshole. Link to comment Share on other sites More sharing options...
RossGo Posted November 11, 2013 Report Share Posted November 11, 2013 that would also be an enormous saft hazard lmfao. wait your not the guy on facebook hes always fighting with called monsta are you? If you are talking to me, no Realistically, it wouldn't be that unsafe. Plenum wall will thick outer shell and that tank would never see any harm. Hardest thing is making it get consistent fueling around corners A tank needs a shallow bottom or a step down to prevent sloshing away from the pump Yes I have a lot of stereo weight. I build for Smiles Per Gallon not Miles Per Gallon LOLZ My build - 1996 4Runner with 2 18s - 149+ in a sealed box (with radiators) Link to comment Share on other sites More sharing options...
RossGo Posted November 11, 2013 Report Share Posted November 11, 2013 Who is willing to take dimensions of an H2 for me? Yes I have a lot of stereo weight. I build for Smiles Per Gallon not Miles Per Gallon LOLZ My build - 1996 4Runner with 2 18s - 149+ in a sealed box (with radiators) Link to comment Share on other sites More sharing options...
sprkn_ranger Posted November 11, 2013 Report Share Posted November 11, 2013 that would also be an enormous saft hazard lmfao. wait your not the guy on facebook hes always fighting with called monsta are you?If you are talking to me, noRealistically, it wouldn't be that unsafe. Plenum wall will thick outer shell and that tank would never see any harm. Hardest thing is making it get consistent fueling around corners A tank needs a shallow bottom or a step down to prevent sloshing away from the pump Just weld in some baffles and it will minimize the sloshing. We use have them in water trucks at work and work real well. Check out my build log! 4 Havocs in a blowthrough http://www.stevemeadedesigns.com/board/topic/187506-sprkn-rangers-blowthrough-build/ Link to comment Share on other sites More sharing options...
basebalz13 Posted November 11, 2013 Author Report Share Posted November 11, 2013 Ross the bottom was angled/sloped Also it did have 3 baffles in it. It was either that or foam sponge in there. The sponge would have taken up too much space but woulda been a lot easier My Facebook- http://www.facebook....m/#!/basebalz13My Twitter- @DB___Designs (3 underscores) Jay Henderson's 'Blue Hurricane' F-150 6 18s 4th order- http://www.stevemeadedesigns.com/board/topic/135451-hot-girls-oh-and-alphasig293s-rebuild-6-aa-mayhem-18s-2-cactus-k12-30k-rms-f150-pics-fixed/ Trippi Congo's Hummer- http://www.stevemeadedesigns.com/board/topic/141430-trippis-hummer-the-final-chapter-eye-candy-on-page-36-52/ Brandon Springle's Accord 4 18s 4th order- http://www.stevemeadedesigns.com/board/topic/179046-honda-accord-4-18s-4th-order-tdh-member/ Cody Johnson F-150 8 15's 4th order- http://www.stevemeadedesigns.com/board/topic/179931-cody-johnsons-f-150-8-15s-4th-order/ Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.