Dfrancis24 Posted June 25, 2012 Report Share Posted June 25, 2012 how bout how u put that plexi over the 360.3 or did it fit snug? sorry, forgot to answer that.....the plexi is cut so precise, that once it goes in, past the leather in the corners, it "bites" itself into place. It has nothing but the fact its snug, and the corners "snag" just right. Its hard to explain. It is upside down 99.9999% of the time and so far, it doesn't budge. Plus, my little pick-tool can get behind it and pop it out with a little pull in a few spots. It actually does not fall out but is easy to pop out if you need to. Win! what about the bass pressure would that make the glass rattle out Quote Link to comment Share on other sites More sharing options...
Omega5002 Posted June 25, 2012 Report Share Posted June 25, 2012 how bout how u put that plexi over the 360.3 or did it fit snug? sorry, forgot to answer that.....the plexi is cut so precise, that once it goes in, past the leather in the corners, it "bites" itself into place. It has nothing but the fact its snug, and the corners "snag" just right. Its hard to explain. It is upside down 99.9999% of the time and so far, it doesn't budge. Plus, my little pick-tool can get behind it and pop it out with a little pull in a few spots. It actually does not fall out but is easy to pop out if you need to. Win! what about the bass pressure would that make the glass rattle out Since he sealed off the box very well, I don't think the bass should go to the trunk at all. Quote 2003 Kia Sorento Team Subsonic LowsTeam Bassin' on a Budget2016 Rebuild Under Construction Best score: 150.2 at 40hz (3k, 2 Custom HDC3 15's) Usaci style(door open, in the kick) Link to comment Share on other sites More sharing options...
dog24fret Posted June 25, 2012 Report Share Posted June 25, 2012 (edited) How much planing did you do on this build? Or is this whole build going by the seat of your pants. Curious cause this looks as if it had three months of planning and design done to it. i plan my next days move whilst sitting on the toilet the day before LOL. Car audio is an obsession of mine and when i am doing a build i think about what i am doing non stop.....going over it again and again in my head to make sure it makes sense. I will sketch something on paper sometimes but mostly i freestyle. Any prior planning is just in my brain from stessing and worrying about it all the time. Plus, people think i am better then i really am. I am NOT a pro by any means. That being said, i have a name to live up to since i own this site.....and messing up in front of everyone should be avoided at all costs LMAO! thanks guys!!! Well that's a stinky build lol. But thanks man it just looks as it was planed more than that. You may not be a pro but your skill and eye for details shows pro all over it. Just more pressure lol. Having to live up to reputation or public view has to wear on you time to time. Glade it's you and not me no offense. Ah make a Mead screw ups dvd and you'll be able to retire rich lol. Edited June 25, 2012 by dog24fret Quote Cowboy Escort GrAnny ThUmper The Burp Link to comment Share on other sites More sharing options...
CJ18 Posted June 26, 2012 Report Share Posted June 26, 2012 Steve what windows platform do you use to run the 360.3 software? I am going to have to have my laptop wiped and get software re installed, but want to make sure to have the right OS put back on. Quote Link to comment Share on other sites More sharing options...
ZombieswithMustaches Posted June 26, 2012 Report Share Posted June 26, 2012 How much planing did you do on this build? Or is this whole build going by the seat of your pants. Curious cause this looks as if it had three months of planning and design done to it. i plan my next days move whilst sitting on the toilet the day before LOL. Car audio is an obsession of mine and when i am doing a build i think about what i am doing non stop.....going over it again and again in my head to make sure it makes sense. I will sketch something on paper sometimes but mostly i freestyle. Any prior planning is just in my brain from stessing and worrying about it all the time. Plus, people think i am better then i really am. I am NOT a pro by any means. That being said, i have a name to live up to since i own this site.....and messing up in front of everyone should be avoided at all costs LMAO! thanks guys!!! It's looking amazing man. I check your progress daily. I, honestly, was wondering how you were gonna fit all those wires in the trunk looms, but you pulled it off. As for non-stop thinking about a project, while working on it, I'm exactly the same way. Seems it's almost an obsession until it's truly finished. Can't wait to see the finished product, boss. Also, I've been thinking about getting a 360.3 and can't wait to see your wiring from the source. Keep up the great work! It's an inspiration for us all. Quote Float mounted IPad Mini playing through Bluetooth IStreamer for Iphone or Ipad Rockford Fosgate 3Sixty.3 RE Audio XXX 6.5's in each door with a second set soon to be added to the front doors Two Rockford T600-4's for the components Blowthrough with two Sundown SA-8's RF T1500-bd's for the subs 8000k H.I.D.'s in headlights and fogs Lifted 2" in front and 2" in back (soon to be installed a Suspension Maxx 1.5" body lift) 17" Ultra Rogue 175's on Nitto Trail Grappler 285/17 70's Undercover Bedcover Surco Roof Rack Five Hella Lights on front bumper 270A Mechman Alternator Two Optima Yellow Top batteries Dynamat double layered each door and roof, quadruple layered on back wall, single layered on floor with Second Skin Luxury Liner Pro on top. Link to comment Share on other sites More sharing options...
meade916 Posted June 26, 2012 Author Report Share Posted June 26, 2012 how bout how u put that plexi over the 360.3 or did it fit snug? sorry, forgot to answer that.....the plexi is cut so precise, that once it goes in, past the leather in the corners, it "bites" itself into place. It has nothing but the fact its snug, and the corners "snag" just right. Its hard to explain. It is upside down 99.9999% of the time and so far, it doesn't budge. Plus, my little pick-tool can get behind it and pop it out with a little pull in a few spots. It actually does not fall out but is easy to pop out if you need to. Win! what about the bass pressure would that make the glass rattle out the trunk see's no bass. Quote All SMD products + MORE available at my store here! https://wccaraudio.com/ Subscribe to My Youtube Channel! Over 1,000,000 subscribers strong! Turn on your notifications! http://www.youtube.com/meade916 Follow My Instagram! Daily live feeds from the shop, exclusive content way before it hits my Youtube channel...and little squares with photo's in them http://www.instagram.com/meade916 The Official SMD Facebook fan Page https://www.facebook.com/SteveMeadeDesigns/ Follow my Tweet (Twitter) http://www.Twitter.com/meade916 Link to comment Share on other sites More sharing options...
meade916 Posted June 26, 2012 Author Report Share Posted June 26, 2012 Steve what windows platform do you use to run the 360.3 software? I am going to have to have my laptop wiped and get software re installed, but want to make sure to have the right OS put back on. win 7 bro. How much planing did you do on this build? Or is this whole build going by the seat of your pants. Curious cause this looks as if it had three months of planning and design done to it. i plan my next days move whilst sitting on the toilet the day before LOL. Car audio is an obsession of mine and when i am doing a build i think about what i am doing non stop.....going over it again and again in my head to make sure it makes sense. I will sketch something on paper sometimes but mostly i freestyle. Any prior planning is just in my brain from stessing and worrying about it all the time. Plus, people think i am better then i really am. I am NOT a pro by any means. That being said, i have a name to live up to since i own this site.....and messing up in front of everyone should be avoided at all costs LMAO! thanks guys!!! It's looking amazing man. I check your progress daily. I, honestly, was wondering how you were gonna fit all those wires in the trunk looms, but you pulled it off. As for non-stop thinking about a project, while working on it, I'm exactly the same way. Seems it's almost an obsession until it's truly finished. Can't wait to see the finished product, boss. Also, I've been thinking about getting a 360.3 and can't wait to see your wiring from the source. Keep up the great work! It's an inspiration for us all. the "source" is the Mark Levenson "amp" in the back of the car and its already wired up I think there is pics of it. thanks man! Quote All SMD products + MORE available at my store here! https://wccaraudio.com/ Subscribe to My Youtube Channel! Over 1,000,000 subscribers strong! Turn on your notifications! http://www.youtube.com/meade916 Follow My Instagram! Daily live feeds from the shop, exclusive content way before it hits my Youtube channel...and little squares with photo's in them http://www.instagram.com/meade916 The Official SMD Facebook fan Page https://www.facebook.com/SteveMeadeDesigns/ Follow my Tweet (Twitter) http://www.Twitter.com/meade916 Link to comment Share on other sites More sharing options...
ZombieswithMustaches Posted June 26, 2012 Report Share Posted June 26, 2012 Crap! How'd I miss that? Sorry for the redundancy! Man, I'm coming out to Cali in July. Anyway I could get a demo of the tahoe and see the Lexus? Quote Float mounted IPad Mini playing through Bluetooth IStreamer for Iphone or Ipad Rockford Fosgate 3Sixty.3 RE Audio XXX 6.5's in each door with a second set soon to be added to the front doors Two Rockford T600-4's for the components Blowthrough with two Sundown SA-8's RF T1500-bd's for the subs 8000k H.I.D.'s in headlights and fogs Lifted 2" in front and 2" in back (soon to be installed a Suspension Maxx 1.5" body lift) 17" Ultra Rogue 175's on Nitto Trail Grappler 285/17 70's Undercover Bedcover Surco Roof Rack Five Hella Lights on front bumper 270A Mechman Alternator Two Optima Yellow Top batteries Dynamat double layered each door and roof, quadruple layered on back wall, single layered on floor with Second Skin Luxury Liner Pro on top. Link to comment Share on other sites More sharing options...
1of120 Posted June 26, 2012 Report Share Posted June 26, 2012 Hands down to you bro. That craftsmanship is absolutely amazing! I'll be hitting up Jason to set me up with that demo. Quote Link to comment Share on other sites More sharing options...
Red-navi-916 Posted June 26, 2012 Report Share Posted June 26, 2012 Looks really good og, ill creep by when i get time to check it out. Although ive been itchin to hear it Btw. Green looks siiikkk Quote BUILDLOG http://www.stevemeadedesigns.com/board/ind...showtopic=61862 "98crewcab"Never a POS....just always "a work in progress" lol that's how we roll bitches!!! Your a lowlife kid. I bet your mother wants to kill herself for not swallowing your ass. Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.