Zapanater Posted May 24, 2012 Report Posted May 24, 2012 Ahh if only if only I had some dough. Quote 2015 Subaru Outback. That is all, I refuse to touch it.
raolito1980 Posted May 24, 2012 Report Posted May 24, 2012 sexy beasts.. Quote 2012 GMC SIerra CC System Build Headunit--Stock Sub Amp--DC 2.0k Subs--2-SA8v2's Enclosure--Need one made!! Highs Amp--Sundown SAX-100.4 Front Highs--Rockford Fosgate T2652-S Rear--Sundown Neo Pro 6.5 XS Power D2400--XS D3400 No Big Three yet! http://www.youtube.c...ser/raolito1980
sundownz Posted May 24, 2012 Author Report Posted May 24, 2012 12v clamp testing : 2420 @ 1.86 ohms 67.1v 36.06a 2490 @ 1.57 ohms 66.2v 42.1a 2750 @ 1.40 ohms 62.1v 44.3a 2950 @ 0.94 ohms 52.4v 56.3a Very pleased with that. It is right on par with the v.1 model -- we will do typical minor tweaks on production and maybe squeeze a few % more out of it. As usual this was done on my Extech power clamp; it reads power out directly very accurately. I use measured voltage to calculate amperage and then actual impedance. Once I get a handful of free time I will do a 16v round-up with all of the new prototypes. Quote - Jacob Fuller - Owner, Sundown Audio - Sundown Audio on FACEBOOK - Please DO NOT PM ME -- use my email address -- [email protected]
joemon Posted May 24, 2012 Report Posted May 24, 2012 Hell ya I need to get one of these Quote stevemeadedesigns.com/board/topic/105505-silvia-first-time-build-kenwood/
Smurfboy Posted May 29, 2012 Report Posted May 29, 2012 It's nice to have someone who works for Company to keep fans informed about what they're currently working on the next project. I like that. Quote
vetkilr01 Posted May 30, 2012 Report Posted May 30, 2012 Nice job Jacob. Looks to be a good upgrade from the last model.What was the amp actually wired to DCR? Quote
sundownz Posted May 31, 2012 Author Report Posted May 31, 2012 Nice job Jacob. Looks to be a good upgrade from the last model.What was the amp actually wired to DCR? Bit of an oddball load -- the higher load test was about 0.55 DCR then I wired another different impedance woofer up to that to bring it down to about 0.35 or so DCR; which is similar to many "half ohm" nominal loads. Quote - Jacob Fuller - Owner, Sundown Audio - Sundown Audio on FACEBOOK - Please DO NOT PM ME -- use my email address -- [email protected]
TheBetterMethod Posted June 10, 2012 Report Posted June 10, 2012 Do you have an ETA or a pre-order date? I'm very interested. Quote 2005 Subaru Outback Wagon Pioneer 9400BH Fi Q 15, SAZ1500dV3 The first build>>> http://www.stevemead...-outback-build/ 140.9 @ 36hz Sealed on dash! REBUILT!!! 2 Fi Q 15s, 2 SAZ1500dv3 146.9 @ 39hz dBDRA certified
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.