Nasty1 Posted June 1, 2012 Report Posted June 1, 2012 I have two yellow tops that are about a year and a half old and they rest at 11.8 and 11.9 volts. I read that if they rest lower than 12.5 they are bad. They were on a mechman 250 alt with 2 runs of + and - with 1/0 and the big 3. My ? is there a way to bring up there resting voltage or do i need to buy new batterys??? Thankz Quote 2 DC Audio lvl 4 xl 18s D .7s walled off @ 30 hz 19 cubes net 245sq in of port Sundown 3500 @ .7 Ohm Sundown 100.4 Rockford Fosgat Power Series 5.25 Dash 6.5 Kicks 8 Coaxils Doors 250 mechicman alt 1 red top under the hood 2 yellow tops in back big 3 with 1/0 knukonceptz wire 3 runs of +/- 1/0 knukonceptz wire IT LBS
SnowDrifter Posted June 1, 2012 Report Posted June 1, 2012 Charge them on a battery charger? Quote ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444
c.director Posted June 1, 2012 Report Posted June 1, 2012 That's low, a 12 volt battery should never fall below 12 really. Ive had a Optimas rest between 12.5-13.5. Quote Facebook: http://www.facebook.com/caleb.arnold.9809 YouTube: http://www.youtube.com/user/CustomAudioChannel?feature=watch
Nasty1 Posted June 1, 2012 Author Report Posted June 1, 2012 how accurate is your voltage meter? Its about .02 off so i know its not that Quote 2 DC Audio lvl 4 xl 18s D .7s walled off @ 30 hz 19 cubes net 245sq in of port Sundown 3500 @ .7 Ohm Sundown 100.4 Rockford Fosgat Power Series 5.25 Dash 6.5 Kicks 8 Coaxils Doors 250 mechicman alt 1 red top under the hood 2 yellow tops in back big 3 with 1/0 knukonceptz wire 3 runs of +/- 1/0 knukonceptz wire IT LBS
Ballen194 Posted June 1, 2012 Report Posted June 1, 2012 Charge them on a battery charger? So what's the resting voltage after a charge on a charger? Quote 98 Isuzu Rodeo Pioneer Deh-6300ub SUBS*Upcoming* SSA Xcon 18 4th order AMP Banda 3500 Mids/Highs Pioneer EQ Clarion EQS746 ETC. Two 1/0 run's KnuKoncepts 1/0 big 3 Shuriken BT-100 under the hood Shuriken BT-120 in the back
Nasty1 Posted June 1, 2012 Author Report Posted June 1, 2012 I havent charged them with a chager yet . Going to buy one in the morning. I posted as soon as i read about them resting so low. Quote 2 DC Audio lvl 4 xl 18s D .7s walled off @ 30 hz 19 cubes net 245sq in of port Sundown 3500 @ .7 Ohm Sundown 100.4 Rockford Fosgat Power Series 5.25 Dash 6.5 Kicks 8 Coaxils Doors 250 mechicman alt 1 red top under the hood 2 yellow tops in back big 3 with 1/0 knukonceptz wire 3 runs of +/- 1/0 knukonceptz wire IT LBS
SnowDrifter Posted June 1, 2012 Report Posted June 1, 2012 Charger would be step 1 Batteries self discharge over time, so if they have been sitting for that long - expect them to be pretty dead. There might have been internal damage to the battery too because it was sitting in a discharged state for so long Quote ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444
Nasty1 Posted June 1, 2012 Author Report Posted June 1, 2012 They haven't been sitting at all !!!! They are in my blazer hooked up and I use it every day, but my amps are not hooked up. Quote 2 DC Audio lvl 4 xl 18s D .7s walled off @ 30 hz 19 cubes net 245sq in of port Sundown 3500 @ .7 Ohm Sundown 100.4 Rockford Fosgat Power Series 5.25 Dash 6.5 Kicks 8 Coaxils Doors 250 mechicman alt 1 red top under the hood 2 yellow tops in back big 3 with 1/0 knukonceptz wire 3 runs of +/- 1/0 knukonceptz wire IT LBS
snafu Posted June 1, 2012 Report Posted June 1, 2012 Yep, this is not uncommon with Optimas now-a-days. The red top in my Mustang typically rests at between 11.8 and 11.9 VDC. I really can't comment why this is because I'd be guessing, but this is something that I run into often. Maybe one of the battery gurus here can chime in - Nate? Scottie? Quote Tony Candela - SMD Sales & Marketing Email me at [email protected] to learn about becoming an SMD Partner!
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.