wiring 2 dual 1ohm subs to 2ohm load

[CstrokerV]

with two 1ohm subs you CAN NOT get a Final load of 2ohms you can get a 4 or 1

and that 1.5 you said it read is that each coil ? if coil it still only can be wired to a 6 or 1.5 ohm

[Katt]

That's all you can wire it too.

And either the guy wired 1 sub up to 2 ohm, Or wired them up, and his meter just sucks. My meter is off .7, and can sometimes fool you. All depends on the meter.

With Dual 1s, You can either Wire to 1 ohm, each amp to .5 Ohm. ( Not recomended unless you have the electrical and know what your doing PROPERLY.)

Or Wire to 4 ohm, Each amp See's 2 ohm.

Edited June 21, 2012 by Katt

[CleanSierra]

Yes there dual 1 ohm subs. I need a final load of 2 ohm to the amp. So 2 dual 1ohm subs to a 2 ohm load on one amp. The amps are strapped so they need a 2ohm load

Dude, you CAN"T wire those subs to present a 2 ohm final load to the amp. It's either .25, 1, or 4....that's it.

*Edit- I was sure late to the party...I was meaning to respond, but didn't in time apparently

Edited June 21, 2012 by CleanSierra

[Tarball]

Send them back and get the correct product.

Edited June 21, 2012 by Tarball