Max Unclipped Power To SA8 V1 & V2?

[ben_slates]

im running 3 SA-8 V2's to a monoblock 5000 watt boss amp, turned amp down and clamped power output, running approx. 1500 watts to each wired down to 1 ohm, they handle it well, they are in a 3.2 cu/ft box ported at 34 htz. if you run a ported box make your port plenty big, these move A LOT of air

[Noel989]

im running 3 SA-8 V2's to a monoblock 5000 watt boss amp, turned amp down and clamped power output, running approx. 1500 watts to each wired down to 1 ohm, they handle it well, they are in a 3.2 cu/ft box ported at 34 htz. if you run a ported box make your port plenty big, these move A LOT of air

How are you wire to 1ohm with 3 subs?

And how do you turned amp down?

Proof of clamping your boss amp?

[will77530]

if yu have to ask run rated power

[wmrcs]

I ran ~700rms to my v1.5 in 1 cube @ 32hz and it bottomed out a little down low

[armykyle1]

Ive got an NS-1 to 2 of them. this box they are in is about .6 per woofer with a 4" aero, I just rebuilt a box to 1cube per woofer with 40sq" of port and it only takes that power around tuning, but under tuning i have to turn the HU down a couple clicks.

that's crazy

[wmrcs]

im running 3 SA-8 V2's to a monoblock 5000 watt boss amp, turned amp down and clamped power output, running approx. 1500 watts to each wired down to 1 ohm, they handle it well, they are in a 3.2 cu/ft box ported at 34 htz. if you run a ported box make your port plenty big, these move A LOT of air

seriously

[Bmike]

i have a v1.5 d2 and ran my saz3500 to it at 4ohm (rated 750 watts at 4ohms ) handled it fine, box is around .65 tuned to 35hz.

[Hi-Po 5.0]

im running 3 SA-8 V2's to a monoblock 5000 watt boss amp, turned amp down and clamped power output, running approx. 1500 watts to each wired down to 1 ohm, they handle it well, they are in a 3.2 cu/ft box ported at 34 htz. if you run a ported box make your port plenty big, these move A LOT of air

since its a boss audio amp, probably 500 watt rms

[brymat93]

I'm running 3 sa8 v2s sitting at about 2 ohms after box rise wired to 2 strapped crescendo bc 2ks. So roughly 4500 rms because when strapped the load is split between two for 1 ohm power from each. Each sub is seeing roughly .75 cubes tuned to 34 Hz with an interchangeable port under the rear bench in my truck. Backed up with a huge extra battery and the big 3 upgrade. Alt upgrade is next. Neither the subs or amps get warm at all I'm really surprised the subs aren't warmer than they are after bumping for a few good hours straight... Haha they will take a beating with good clean power. Now I understand what they ment by basicly no mechanical limit lol.

[youngbass98]

I got my sa 8 v2 a month and a half ago, running it on a prime 1200 about 3/4 volume and it takes it all day doesn't even get warm