audiofanaticz Posted September 17, 2012 Author Report Share Posted September 17, 2012 These are from yesterday and tonight so far. started to get chilly so I thru on the old hoody, fits better now than 2 years ago. LOL LED wiring Link to comment Share on other sites More sharing options...
audiofanaticz Posted September 17, 2012 Author Report Share Posted September 17, 2012 Dirty ass seats!! all that dust cleaned up Now the Interior LEDs will go on/off with the underbody led kit. Paul likes the color green so I tapped into the interior led kit only and added a switch so he can turn on only the interior leds at any time, but they will only be green. 2nd switch will be for any new possibilitys of adding more lighting, so power/ground is pre did. Here is something that bugged me for a while. contaplated how to fix the problem of the hole in the carpet, it needs new carpet for a proper fix, but the problem still exhists that that carpet does not go flat on the floor, there is a a/c & heat vent right there, which leaves the carpet off the floor. This is where paul pushes himself up and out of the car with his right heal. It wore thru the carpet. Genius design by Dodge! Made a riser with mdf. blurry picture, but i wrapped it with a sheet of Damplifier Pro 80mil from Second Skin to help resist moisture and water. and its in place now rear beauty panels under the 4500s In this last picture you can see a mdf box on my table saw I made up quick, this is to mount the oem fusebox that was in the wheel well before being removed when it got filled with d3100s. I ended up rounding all corners, and also wrapped in vinyl too. Link to comment Share on other sites More sharing options...
audiofanaticz Posted September 17, 2012 Author Report Share Posted September 17, 2012 Here is the said fuse box that is just laying around and with the box i made and wrapped and one of the false floor panels in place both bottom panels in place with the fuse box and with some accent lighting brought out the two 4channel amps, to try and figure out where to put this XS Power battery charger. amps are straight in this pic with charger in middle amps slanted and charger in the middle or charger off to the driver side to of the car. Link to comment Share on other sites More sharing options...
Katt Posted September 17, 2012 Report Share Posted September 17, 2012 I'd say slanted, and manage to find a way to hide the Intellicharger's wires. Awesome work feg. Keep er up! *06 330i - Sundern x12 - saz-3500* *91 Foxbody V1 S-Trim Notch* Link to comment Share on other sites More sharing options...
audiofanaticz Posted September 17, 2012 Author Report Share Posted September 17, 2012 hidding wires is easy. bring them to the front of the box and down around the side Back of the box is already taken up by the saz4500s, so the majority of the black heat shrunk wires wont be seen much either. anyways, pictures before I go shower and crash for a few hours. since Im still sorta undecided on the battery charger I moved on from it to sleep on it, and started the voltage meter housing in the never used ashtray. Probably will finish up some touch ups tomorrow, prime and spray it. Link to comment Share on other sites More sharing options...
scooter99 Posted September 17, 2012 Report Share Posted September 17, 2012 Wow, it's looking good. Those lights really set it off. Nice work! Can't wait to see more! Facebook Page: S99Creations 2006 F250 Lariat Build Link to comment Share on other sites More sharing options...
audiofanaticz Posted September 19, 2012 Author Report Share Posted September 19, 2012 this was "extra" that was removed from the factory panels made a little rack for the xs power charger Link to comment Share on other sites More sharing options...
audiofanaticz Posted September 19, 2012 Author Report Share Posted September 19, 2012 Its currently 40degrees outside in my area so going super slow taking lots of breaks Im not perfect at wrapping, but getting better and better, my adhesive I think is holding me back, so I talked with Ray West and he gave me some info, also need to buy a new heatgun something fierce, just seems like its getting no where near as hot as it did a few weeks ago. Link to comment Share on other sites More sharing options...
audiofanaticz Posted September 19, 2012 Author Report Share Posted September 19, 2012 Its about 30-32 degrees outside, so I mainly messed with some smaller stuff inside the garage even tho I could do a lot more tonight. I turned the garage heat on just a tad to about 45degrees and worked for a few hours before heading inside. Just messed with the ashtray a little more, and hopefully the paint will dry nice for me (crosses fingers). Also check out my screwdriver bits in my case You see what I did there? LOL Link to comment Share on other sites More sharing options...
conceptM Posted September 19, 2012 Report Share Posted September 19, 2012 Very nice attention to details! It takes a while, but then you get something different from normal. 22 cal? Woofer: 12" Phase Linear Aliante Limited Mids & highs: DLS Ultimate 5 1/4" Amp: Audison VRX 6.420 HU: Sony CDX-C90R Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.