Sheena Posted August 9, 2012 Report Share Posted August 9, 2012 It's on their website ready to ship out. I'll give them an email though. And nah were cool man I highly doubt it's built and ready to ship its not a common alt they sell not like a Gm alt for tahoe suburban blazer etc... I read what's on the page for the 270amp for our car and it doesn't say anything about the case being billet so did they tell you that or you read it somewhere or I over looked it?? in the pictures you should EASILY be able to tell that its billet. very easy.. Quick Product Overview Our XP series high-output alternators are the ultimate upgrade when you need the absolute biggest and most sophisticated high output alternator on the planet. All of our XP series alternators are designed for one purpose, brute force idle output. When you need the most extreme idle output with the most sophisticated integrated alternator-monitoring system to prevent thermal failures is where the XP alternator delivers. Every DC Power product we sell is held to the strictest quality standards in the industry. We only use 100% brand new USA made components along with one of the most rigorous testing before each individual alternator leaves our shop. Each XP series alternator comes standard with our custom hard-anodized billet aluminum pulley and 2-year replacement warranty. If you're looking for a significant overall increase in top end and idle output, the XP series alternator is your solution. 09 Civic EX KDC-X395 (2) SKAR Audio VVX-12 Skar Audio SK-1500.1 4 cu ft @32 (new box and more port soon) Firing Forward not sealed off Stock 80 Amp Alt Big 3 In 1/0 Knu 2 Runs To The Back 1 Pos 1 Neg In 1/0 Knu DD-1'd 13.8v drop Link to comment Share on other sites More sharing options...
jlh2003 Posted August 9, 2012 Report Share Posted August 9, 2012 It's on their website ready to ship out. I'll give them an email though. And nah were cool man I highly doubt it's built and ready to ship its not a common alt they sell not like a Gm alt for tahoe suburban blazer etc... I read what's on the page for the 270amp for our car and it doesn't say anything about the case being billet so did they tell you that or you read it somewhere or I over looked it?? in the pictures you should EASILY be able to tell that its billet. very easy.. Quick Product Overview Our XP series high-output alternators are the ultimate upgrade when you need the absolute biggest and most sophisticated high output alternator on the planet. All of our XP series alternators are designed for one purpose, brute force idle output. When you need the most extreme idle output with the most sophisticated integrated alternator-monitoring system to prevent thermal failures is where the XP alternator delivers. Every DC Power product we sell is held to the strictest quality standards in the industry. We only use 100% brand new USA made components along with one of the most rigorous testing before each individual alternator leaves our shop. Each XP series alternator comes standard with our custom hard-anodized billet aluminum pulley and 2-year replacement warranty. If you're looking for a significant overall increase in top end and idle output, the XP series alternator is your solution. I can see it says the pulley is billet aluminum it says nothing else about if the case is billet aluminum......... the case its self may very well be aluminum but are you assuming that or did they tell you that over the phone or in email? That is not a actual picture of our alternator. compare my pics to the ones shown on the site, that is probably a standard picture of their XP series alternator pictures of the dc power 270a XP: Pictures of our stock alt on the left and pictures of 225a Excessive amperage alt on right: Installed: http://www.termpro.com/asp/competitorstats.asp?Competitor_ID=88276 AlphaDamp CLD Tiles - Get more sound deadening using less sound deadener http://www.secondskinaudio.com/products/AlphaDamp.php Link to comment Share on other sites More sharing options...
HatersGonnaHate Posted August 9, 2012 Author Report Share Posted August 9, 2012 Do the big 3, you can probably run about 1200wrms with acceptable voltage drop. This is very accurate. I ran 1200 on stock electrical, had some lights dimming, did the big 3 and it brought the dimming lights to a halt. Cool I will have plenty of extra watts to spare then And to know when to turn the eld bypass switch on, you need to have a voltmeter. Watching the voltmeter, you'll see voltage drop suddenly, that's the eld kicking in and being annoying since that write up, I've since removed that switch and ran that wire straight to ground, leaving the bypass enabled all the time. I've had no negative effects on my system since doing so. Would u recommend I do this? I actually would recommend doing it. I've had no problems with it at all, plus I don't have to monitor my voltage as much so I'm not waiting on the eld to kick in so I have to flip the switch And to know when to turn the eld bypass switch on, you need to have a voltmeter. Watching the voltmeter, you'll see voltage drop suddenly, that's the eld kicking in and being annoying since that write up, I've since removed that switch and ran that wire straight to ground, leaving the bypass enabled all the time. I've had no negative effects on my system since doing so. Reminds me, Has anyone done this on the 5th gen yet? ( 92-95? ) And am i the only one on here with a 5th gen? ( Beside J00bles. ) I hate the ELD. Can't say its helped me not one bit the way i drive anyways lol. And the biggest i can fit, and also told from others, is Two 170s Max. Then again, my block has the B8 head not made for power but MPG. Soo. I don't think anyone has done it on a 5th gen yet, I know someone did it on a 6th gen though. If you need more info on it, you got my number pimpin' My name is AdamThis is my Civic Build.7" Samsung Tab 2Kenwood KDC-X896Clarion EQS746Sundown X-15DC 3.5k @2ohmHatersGonnaHate's 02 Civic UBLELD Bypass for Honda Civic/Accord/FitDon's Jeep Grand Cherokee Rebuild N8ball2013 - i think you'd stick your dick in a blender if it told you it was 40 wtih two kids your age. lol srp365 - If posting were picking up bitches, I'd be going home single tonight looks like tony montana sneezed in your car. Link to comment Share on other sites More sharing options...
Katt Posted August 10, 2012 Report Share Posted August 10, 2012 And to know when to turn the eld bypass switch on, you need to have a voltmeter. Watching the voltmeter, you'll see voltage drop suddenly, that's the eld kicking in and being annoying since that write up, I've since removed that switch and ran that wire straight to ground, leaving the bypass enabled all the time. I've had no negative effects on my system since doing so. Reminds me, Has anyone done this on the 5th gen yet? ( 92-95? ) And am i the only one on here with a 5th gen? ( Beside J00bles. ) I hate the ELD. Can't say its helped me not one bit the way i drive anyways lol. And the biggest i can fit, and also told from others, is Two 170s Max. Then again, my block has the B8 head not made for power but MPG. Soo. I don't think anyone has done it on a 5th gen yet, I know someone did it on a 6th gen though. If you need more info on it, you got my number pimpin' I should probably work on this sometime, lol. Im not sure how easy it will be, since mines probably burried. AND Along with the fact, the bass fucked up my vent controls. Fucker's stuck on the windshield vents. Sucks. And still blows hot air even with the heater core physically disconnected. But thats how my car is. I also thought about doing a Double Din mod for my dash too. I completely forgot i had your number too, sheet. #TeamHondaProblems FTW. ( Should really start a group called that LOL. ) I'm glad i have no A/C to deal with in the way. I can run 3 Alts on my car if needed, well then. CX Model FTW/L. I got 99 problems, but space under the hood aint one. I feel bad for you son. *06 330i - Sundern x12 - saz-3500* *91 Foxbody V1 S-Trim Notch* Link to comment Share on other sites More sharing options...
Sheena Posted August 12, 2012 Report Share Posted August 12, 2012 regarding our ongoing civic investigation on belt slip 09 Civic EX KDC-X395 (2) SKAR Audio VVX-12 Skar Audio SK-1500.1 4 cu ft @32 (new box and more port soon) Firing Forward not sealed off Stock 80 Amp Alt Big 3 In 1/0 Knu 2 Runs To The Back 1 Pos 1 Neg In 1/0 Knu DD-1'd 13.8v drop Link to comment Share on other sites More sharing options...
Sheena Posted August 13, 2012 Report Share Posted August 13, 2012 The highest I can build in the factory housings is about 170 amps. It would be $365 and I have free shipping in the lower 48. On Sat, Aug 11, 2012 at 11:44 PM, <> wrote: A new entry has been added to Contact Form and contains the following data Name : Cody Email : [email protected] Subject : Honda ALT 2009 Message : whats up guys at EA! i've done my shopping at all the other major alt shops (dc, mechman, singer) and i thought i'd hit EA up after hearing GREAT things about the company. so heres my request: 2009 honda civic EX R18A engine. i need to know the price and biggest and baddest alt i can fit on the stock OEM bracket while maintaining no gauge battery light and maintaining no belt slip. car idles at around 650rpm and idle amps are a must! thanks -cody -- 09 Civic EX KDC-X395 (2) SKAR Audio VVX-12 Skar Audio SK-1500.1 4 cu ft @32 (new box and more port soon) Firing Forward not sealed off Stock 80 Amp Alt Big 3 In 1/0 Knu 2 Runs To The Back 1 Pos 1 Neg In 1/0 Knu DD-1'd 13.8v drop Link to comment Share on other sites More sharing options...
Sheena Posted August 13, 2012 Report Share Posted August 13, 2012 to wrap things up it looks like this for the 06-09 honda civics with stock OEM alt location. singer alts: 175 amp unit mechman: 160 amp unit Excessive amperage: 170 amp unit dc power: 270 amp unit 09 Civic EX KDC-X395 (2) SKAR Audio VVX-12 Skar Audio SK-1500.1 4 cu ft @32 (new box and more port soon) Firing Forward not sealed off Stock 80 Amp Alt Big 3 In 1/0 Knu 2 Runs To The Back 1 Pos 1 Neg In 1/0 Knu DD-1'd 13.8v drop Link to comment Share on other sites More sharing options...
IBleedMusick Posted August 13, 2012 Report Share Posted August 13, 2012 Damn I missed a lot on this but I think Adam needs to change the title of this to Honda/Acura Owners since we have a few guys pushing things other than Civic's. 2013 Dodge Charger Build Log 1996 Ford Explorer XLT 5.0Build Log 2005 Honda Civic LX Coupe Build Log SMD SUPER SELLER!!!!My Selling Feedback Link to comment Share on other sites More sharing options...
jlh2003 Posted August 13, 2012 Report Share Posted August 13, 2012 The highest I can build in the factory housings is about 170 amps. It would be $365 and I have free shipping in the lower 48. On Sat, Aug 11, 2012 at 11:44 PM, <> wrote: A new entry has been added to Contact Form and contains the following data Name : Cody Email : [email protected] Subject : Honda ALT 2009 Message : whats up guys at EA! i've done my shopping at all the other major alt shops (dc, mechman, singer) and i thought i'd hit EA up after hearing GREAT things about the company. so heres my request: 2009 honda civic EX R18A engine. i need to know the price and biggest and baddest alt i can fit on the stock OEM bracket while maintaining no gauge battery light and maintaining no belt slip. car idles at around 650rpm and idle amps are a must! thanks -cody -- Wtf none of anyone's answers are constant... I asked and talked with Nate multiply times before and after I got my alt and I'm positive mine is 225a http://www.termpro.com/asp/competitorstats.asp?Competitor_ID=88276 AlphaDamp CLD Tiles - Get more sound deadening using less sound deadener http://www.secondskinaudio.com/products/AlphaDamp.php Link to comment Share on other sites More sharing options...
IBleedMusick Posted August 13, 2012 Report Share Posted August 13, 2012 The highest I can build in the factory housings is about 170 amps. It would be $365 and I have free shipping in the lower 48. On Sat, Aug 11, 2012 at 11:44 PM, <> wrote: A new entry has been added to Contact Form and contains the following data Name : Cody Email : [email protected] Subject : Honda ALT 2009 Message : whats up guys at EA! i've done my shopping at all the other major alt shops (dc, mechman, singer) and i thought i'd hit EA up after hearing GREAT things about the company. so heres my request: 2009 honda civic EX R18A engine. i need to know the price and biggest and baddest alt i can fit on the stock OEM bracket while maintaining no gauge battery light and maintaining no belt slip. car idles at around 650rpm and idle amps are a must! thanks -cody -- Wtf none of anyone's answers are constant... I asked and talked with Nate multiply times before and after I got my alt and I'm positive mine is 225a When did you buy your alt? He may not make it anymore? 2013 Dodge Charger Build Log 1996 Ford Explorer XLT 5.0Build Log 2005 Honda Civic LX Coupe Build Log SMD SUPER SELLER!!!!My Selling Feedback Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.