BEEMDUB Posted August 21, 2012 Report Share Posted August 21, 2012 If I strapped saz 1500s and put em on my sa-12s would I see an improvement over the approx. 2200 (about 2k after rise) theyre getting now? Quote Link to comment Share on other sites More sharing options...
bkolfo4 Posted August 21, 2012 Report Share Posted August 21, 2012 Re-read your post, think about it, and then explain how in the heck you think anyone can give you an answer based on the info you have provided. I'll give you a couple of hints - what amp are you running now? What voice coil impedance are the subs? Etc. Quote Current system: 1997 Blazer - (4) Customer Fi NEO subs with (8) American Bass Elite 2800.1s Previous systems: 2000 Suburban - (4) BTL 15's and (4) IA 40.1's = 157.7 dB at 37 Hz. 1992 Astro Van - (6) BTL 15's and (6) IA 40.1's = 159.7 dB at 43 Hz. Link to comment Share on other sites More sharing options...
BeAlLsTaR13 Posted August 21, 2012 Report Share Posted August 21, 2012 how do you know your getting 2k after rise? what are you rising to? and have you clampped it? cause if this is a daily setup, its impossible to clamp any sort of musical power out of an amplifier as its constantly changing, and if your amp is the aq2200d in your sig, i can almost promise you your not seeing 2200, even 2k daily, lucky if around 1500w Quote Team Sundown Audio**CURRENT** -- 2012 Scion tC Build Click Here **OLD** -- 2002 Pontiac Grand AM Build Click Herecheck them out, slap me a comment2002 Pontiac Grand AM SE 2.2l 4 cylinder ecotec.-------------------------------------------------------------------Head Unit - Alpine CDA-9887Subs - 2x Z 12 v.2s - v.3 + NS Soft partsAmplifier - Sundown Audio SAZ-3500DEnclosure - 3.33 Cubes tuned to 34.66hzFront Stage - JBL P660c 6.5" ComponentsRear Deck - Powerbass 4xl 6.5" Mid-RangeFront Stage Amplifier - Sundown Audio SAX-100.4DWires - Kicker Hyperflex 1/0, KnuKonceptz 1/0, Knu 4 and 8 Gauge, Kicker RCAsElectrical - 275 AMP DC Power H/O Alternator, XS Power S3400, XS Power D2700Videos - http://www.youtube.com/user/BeAILsTaR13------------------------------------------------------------------- Link to comment Share on other sites More sharing options...
bkolfo4 Posted August 22, 2012 Report Share Posted August 22, 2012 I was guessing AQ2200, but I am on my phone and cannot see the sig. That brings up the impedance question - I would assume you have D1's wired to 1 ohm. If you are going to run the 1500's strapped at 1 ohm (actual 0.5 per amp), I would say there is a 99% chance it will be louder, but do you want to do that? The better option would be to replace the 2200 with a 3500. Quote Current system: 1997 Blazer - (4) Customer Fi NEO subs with (8) American Bass Elite 2800.1s Previous systems: 2000 Suburban - (4) BTL 15's and (4) IA 40.1's = 157.7 dB at 37 Hz. 1992 Astro Van - (6) BTL 15's and (6) IA 40.1's = 159.7 dB at 43 Hz. Link to comment Share on other sites More sharing options...
BEEMDUB Posted August 22, 2012 Author Report Share Posted August 22, 2012 (edited) how do you know your getting 2k after rise? what are you rising to? and have you clampped it? cause if this is a daily setup, its impossible to clamp any sort of musical power out of an amplifier as its constantly changing, and if your amp is the aq2200d in your sig, i can almost promise you your not seeing 2200, even 2k daily, lucky if around 1500w well that only further helps what I'm trying to say in that I'm not getting close to the 2200 out of the amp lol... I was guessing AQ2200, but I am on my phone and cannot see the sig. That brings up the impedance question - I would assume you have D1's wired to 1 ohm. If you are going to run the 1500's strapped at 1 ohm (actual 0.5 per amp), I would say there is a 99% chance it will be louder, but do you want to do that? The better option would be to replace the 2200 with a 3500. well if you would have looked at my sig it would have saved you the trouble of being a smart ass in your first post....but no. I have D4's wired to 1 ohm and its all depending on the price I could find one for because most the 3500's I've seen are more than 2 1500's.. Edited August 22, 2012 by BEEMDUB Quote Link to comment Share on other sites More sharing options...
MrSkippyJ Posted August 22, 2012 Report Share Posted August 22, 2012 (edited) I was guessing AQ2200, but I am on my phone and cannot see the sig. That brings up the impedance question - I would assume you have D1's wired to 1 ohm. If you are going to run the 1500's strapped at 1 ohm (actual 0.5 per amp), I would say there is a 99% chance it will be louder, but do you want to do that? The better option would be to replace the 2200 with a 3500. well if you would have looked at my sig it would have saved you the trouble of being a smart ass in your first post....but no. I have D4's wired to 1 ohm and its all depending on the price I could find one for because most the 3500's I've seen are more than 2 1500's.. if you would have read what he wrote you would have seen he is on a mobile version and can't see sigs... Edited August 22, 2012 by MrSkippyJ Quote F150: Stock 2019 Harley Road Glide: Amp: TM400Xad - 4 channel 400 watt Processor: DSR1 Fairing (Front) 6.5s -MMats PA601cx Lid (Rear) 6x9s - TMS69 Link to comment Share on other sites More sharing options...
Emmet Posted August 22, 2012 Report Share Posted August 22, 2012 I was guessing AQ2200, but I am on my phone and cannot see the sig. That brings up the impedance question - I would assume you have D1's wired to 1 ohm. If you are going to run the 1500's strapped at 1 ohm (actual 0.5 per amp), I would say there is a 99% chance it will be louder, but do you want to do that? The better option would be to replace the 2200 with a 3500. well if you would have looked at my sig it would have saved you the trouble of being a smart ass in your first post....but no. I have D4's wired to 1 ohm and its all depending on the price I could find one for because most the 3500's I've seen are more than 2 1500's.. Reading > you. Quote i shook this one kids hand and it just folded in mine. long story short i fucked his girlfriendso.. yeah.. You want this to happen to you? Give decent handshakes people. I was gifted with an innate ability to distribute wholesale ass beatings in a timely and orderly fashion. Link to comment Share on other sites More sharing options...
BEEMDUB Posted August 22, 2012 Author Report Share Posted August 22, 2012 (edited) I was guessing AQ2200, but I am on my phone and cannot see the sig. That brings up the impedance question - I would assume you have D1's wired to 1 ohm. If you are going to run the 1500's strapped at 1 ohm (actual 0.5 per amp), I would say there is a 99% chance it will be louder, but do you want to do that? The better option would be to replace the 2200 with a 3500. well if you would have looked at my sig it would have saved you the trouble of being a smart ass in your first post....but no. I have D4's wired to 1 ohm and its all depending on the price I could find one for because most the 3500's I've seen are more than 2 1500's.. if you would have read what he wrote you would have seen he is on a mobile version and can't see sigs... I did see what he said thats why I said IF you would have looked at my sig... meaning if you could have seen it...yea...if he wants an apology for me calling him a smartass I'll be happy to issue one I was guessing AQ2200, but I am on my phone and cannot see the sig. That brings up the impedance question - I would assume you have D1's wired to 1 ohm. If you are going to run the 1500's strapped at 1 ohm (actual 0.5 per amp), I would say there is a 99% chance it will be louder, but do you want to do that? The better option would be to replace the 2200 with a 3500. well if you would have looked at my sig it would have saved you the trouble of being a smart ass in your first post....but no. I have D4's wired to 1 ohm and its all depending on the price I could find one for because most the 3500's I've seen are more than 2 1500's.. Reading > you. Me caring wtf you say < me not caring wtf you say Edited August 22, 2012 by BEEMDUB Quote Link to comment Share on other sites More sharing options...
Brandon15zzz Posted August 22, 2012 Report Share Posted August 22, 2012 Your going to get a lot of help being an asshole. :thumbs: Quote Vehicle: 1995 Impala SSHead Unit: Pioneer AVH-P4400BHMids And Highs: (still deciding)Batteries: 1 Deka Group 34 Time to make a race car.My Build Log: Solo X 12"http://www.stevemead...don15zzz-build/My Build Log: DC lvl 4 xl 15"http://www.stevemead...don15zzz-build-My Wall Build Log: 4 Lanzar 15's/ 3k+ RMShttp://www.stevemead...t-by-techforce/My Feedback:http://www.stevemead...1 Link to comment Share on other sites More sharing options...
MrSkippyJ Posted August 22, 2012 Report Share Posted August 22, 2012 Your going to get a lot of help being an asshole. :thumbs: no shit. one day, people will realize this. Quote F150: Stock 2019 Harley Road Glide: Amp: TM400Xad - 4 channel 400 watt Processor: DSR1 Fairing (Front) 6.5s -MMats PA601cx Lid (Rear) 6x9s - TMS69 Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.