Ram1989custom Posted October 1, 2012 Report Posted October 1, 2012 I have to disagree. 45s actually don't help you gain as much as you would think. In fact, I have heard of many cases where people have lost up to .4 db from installing a single 45. Plus, I find a 150 at 63 hz to not be that surprising of a score, ya know? I mean, I could probably put 2 Sony Xplods in a box with the right airspace and a 15-16 sq ft per cube port tuned to the high 50s/low 60s and hit the same numbers, especially if it is in a vehicle that gets loud easy. With that being said, I do completely agree with you that it would be a good idea for an SPL setup in a CRX, but I cant see it being any useful if you want to play any sort of music TBH. Plus, like everyone else is saying, it does seem like a waste of space, huh? 1989 Dodge D150, 318 LA; Holley Fuel InjectionBuild Log:http://www.stevemeadedesigns.com/board/topic/72838-dc-dodge-d150-blowthrough-thread-updated-pics-fixed-2-level-4-15s-wlvl-5-coils/Truck Add-ons: 20" rims2/4 drop15% tintBucket seatsK&N air filterSmog Pump deleteStereoWORK IN PROGRESS2 DC Level 4 15s with Level 5 Coils1 Audiopipe AP15001D (Soon to be a Crescendo BC3500)JBL 650W amp (unsure of model)4 6x9 Rockford Prime 3 ways2 Soundstream TWS.4 Dome tweetersKnuKonceptz 1/0 Power Wire *3 Kinetik 2400s and a Mechman 270A alt in the future*
Goblenator Posted October 1, 2012 Author Report Posted October 1, 2012 this would be purely an spl comp setup. no good for music.
revoracing247 Posted October 1, 2012 Report Posted October 1, 2012 having square walls creates resonant frequencies so like a perfect box would resonate really bad at that quarter wave length. that being said the ideal enclosure to get ride of that would be a sphere. no frequency would be able to bounce off walls perfectly and resonate. it's why it's better to have angles in boxes for sq. so having a tube would help get rid of the whole resonance thing. this is just stuff ive read from a box designing program a while back. ~ If it was easy, everybody would be doing it ~
tacomaguy1 Posted October 1, 2012 Report Posted October 1, 2012 very popular in spl setups in crx's Team Flex Issues
reg93f150 Posted October 1, 2012 Report Posted October 1, 2012 if your lookin for the calculations on it like volume and stuff, i know rocksford has a box calculator for a cylindrical enclosure ALL CREDIT TO XX1 FOR DC BANNER down rpping vanderbilt. 30 miles from victoria. i own the 3rd loudest setup here out of 3. but i did put together all 3 setups strapping 2 amps together ? like bolting them next together? using bungy cables to hold them down? or wiring separate amps to each sub
certifiednut Posted October 1, 2012 Report Posted October 1, 2012 you could use a bucket these orphans aren't going to feast on themselves
Recommended Posts
Archived
This topic is now archived and is closed to further replies.