Mikey Bates Posted October 22, 2012 Report Share Posted October 22, 2012 I have PWX 10s coming in and soon will order my FT1 Tweets and PWX 6.5s. The 10s are 300rms and 4ohm each The 6.5s are 150rms and not sure but either 4 or 8 ohm. wanna order after i figured out what i want them at And the FT1 Supertweets are 80rms and 4ohms each. Each door will have 1 10, 2 6.5s, a tweet in the door. and a tweet in the dash. There will be a total of 760rms per side. and 1520rms total. My question is I have 3 RCA outs on my Kendwood deck. what kind of amps/crossovers/anything do i need in order to run an active set up properly. I want to make sure everything is crossed over very well and such Link to comment Share on other sites More sharing options...
n8ball2013 Posted October 22, 2012 Report Share Posted October 22, 2012 what amps are you going to be using first. THERE IS NO BUILD LOG! 1998 Chevy Silverado ext cab Alpine CDA-9887 4 Team Fi 15s 2 Ampere Audio TFE 8.0 2 Ampere Audio 150.4 3 Digital Designs CS6.5 component sets Dual Mechman 370XP Elite alternators inbound! 8 XS Power d3400 6 XS power d680 Second Skin Stinger Tsunami Wiring Sky High A Real Voltmeter not a piece of shit stinger. Link to comment Share on other sites More sharing options...
Mikey Bates Posted October 22, 2012 Author Report Share Posted October 22, 2012 I haven;t bought the amps yet. i wanted to make sure that i was doing everything right instead of working with what i got. The only thing coming are the pair of 4ohm 10s. will order the rest in a week or so including amps Link to comment Share on other sites More sharing options...
n8ball2013 Posted October 22, 2012 Report Share Posted October 22, 2012 you will either need an amp thats active capable or a processor to filter the frequencies out. THERE IS NO BUILD LOG! 1998 Chevy Silverado ext cab Alpine CDA-9887 4 Team Fi 15s 2 Ampere Audio TFE 8.0 2 Ampere Audio 150.4 3 Digital Designs CS6.5 component sets Dual Mechman 370XP Elite alternators inbound! 8 XS Power d3400 6 XS power d680 Second Skin Stinger Tsunami Wiring Sky High A Real Voltmeter not a piece of shit stinger. Link to comment Share on other sites More sharing options...
Mikey Bates Posted October 22, 2012 Author Report Share Posted October 22, 2012 by processor im guessing like a 360.3 right? what are some amps that are active capable? <- Would they basically have a really nice EQ set on them? so you can set the top and bottom to everything? Link to comment Share on other sites More sharing options...
KnockinthaStreetzof608 Posted October 22, 2012 Report Share Posted October 22, 2012 the crossover has to match on how you want to cross your mids and tweets at CAR -2005 Ford Mustang (Legand Lime) H/U -Pioneer avh 3200dvd Amps 2 AQ 3500d.1s strapped 1ohm daily .25burps 1Sundown Audio 100.4 1 Sundown Audio 125.2 Subs 4 AQ HDC'4s 12's Mids and highs 4 Sundown Neo Pro 8s 2 AQ Super Tweeters Electronical Mechman 270 unit 1 D3400 2 D3100's WALLED! Link to comment Share on other sites More sharing options...
IBleedMusick Posted October 22, 2012 Report Share Posted October 22, 2012 by processor im guessing like a 360.3 right? what are some amps that are active capable? <- Would they basically have a really nice EQ set on them? so you can set the top and bottom to everything? The crescendo amps are active capable if you want to run matching gear. 2013 Dodge Charger Build Log 1996 Ford Explorer XLT 5.0Build Log 2005 Honda Civic LX Coupe Build Log SMD SUPER SELLER!!!!My Selling Feedback Link to comment Share on other sites More sharing options...
Mikey Bates Posted October 22, 2012 Author Report Share Posted October 22, 2012 So would this work. Get an 1100.4. its 300rms x 4 at 2ohms. I could run 2 6.5s to 1 channel. The other 2 6.5s on another channel. ( each 6.5 will be 4ohms and each pair wired down to 2ohms ) This covers my 6.5s. Then can i run the other 2 channels at 4 ohms ( is this possible 2 channels at 2 ohms and the other two at 4 ohms ) If so i can pair 2 8 ohm tweets and wire to 4 ohms. They are 80 rms each so 160. and the amp is 180 so i'll just have to set my gains good. All that's left are my 10s......Thoughts? and i'll also be running most likely 1 Ft1 and 1 6.5 in the rear doors keep in mind Just to clarify Channel 1: Two 6.5 Mids, each 4 ohms wired to 2 ohms. This makes the amps 300 rms and the pair of 6.5s 300 rms Channel 2: same as channel 1 Channel 3: Run a Pair of 8 ohm tweets and wire to 4 ohms. Tweets would be 160rms and amp is 180 watch the gains Channel 4: Same As channel 3 Conflict, can i run Channel 1 & 2 at 2 ohms and 3 & 4 at 4 ohms? Also This leave My 10s Link to comment Share on other sites More sharing options...
Mikey Bates Posted October 22, 2012 Author Report Share Posted October 22, 2012 On another note. on the 1100.4 If i want my mids crossed from 80ish or 100ishhz to 5khz. how would i do that with the amp. Link to comment Share on other sites More sharing options...
finkster Posted October 22, 2012 Report Share Posted October 22, 2012 what kind of kenwood deck? it may already be active capable. An external crossover is always your best bet though. DAT 4125------>RE XXX comps active Eclipse cd7000 I serve drunks for a living Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.