Afficionado Posted December 13, 2012 Report Posted December 13, 2012 I was on the way to the gym today bumping my music, not insanely loud, but loud enough. All of sudden the subs just stop, i'm thinking no biggie a wire just came close or something. get to the gym and take my cell phone out, don't see anything and the power light is still going on the amp. get home, haul it in the garage and i've done every possible thing i can think of...If you have any advice for things i may have not thought to check please tell me. i also tested a pioneer amp and the pioneer worked perfectly. I'm running a Kicker ZX1500.1 powering 2x Rockford Punch 15's. the power not protection light comes on the amp, everything seems fine except nothing comes out of my subs...nothing on the inside of the amp smells or looks even the slightest bit funky...i'm at a loss, please help. If you have any questions relating to nutrition, lifting, or health in general, feel free to give me a PM and I will give you straight forward advice with no BS involved.
elflako17 Posted December 13, 2012 Report Posted December 13, 2012 did you check your fuses? 2010 Mazda 3 *Rebuild Time* Subs - (2) AA Mayhems 12's Sub amp - (1) Populus Audio TPA 6500 Headunit - Pioneer App Radio 2 Batteries - XS Power (1) D3100 up front | 6 XP950 rear Wire - Sky High 1/0 Gauge wires and RCA's and steve's VM1 Alternator - Singer 260 Externally Regulated Front Stage: (2) PRV Audio 10W650A (4) PRV Audio 8MR500-PhP-4 (4) DS Bullet Tweets | (2) 6.5 Components (Rear doors) Mids & high Amp : (2) Populus Audio 100.4 Processor: Rockford 3sixty.3 The Build Log : http://www.stevemeadedesigns.com/board/topic/175922-2010-mazda-3-2-aa-mayhems-12-pg14-new-video/page-11
Watch the bass Posted December 13, 2012 Report Posted December 13, 2012 Check RCA´s, check sub´s. That means if you can get another RCA´s to check form a friend or so. Maby the output source of your HU f... up. "in the abundance of water, the fool is thirsty" Bob Marley
BFF Larry Posted December 13, 2012 Report Posted December 13, 2012 how long have you had this setup Team Clearly Louder (MECA)Team DC Audio ++* SELLING the CACTUS SOUNDS K12 for $1550 shipped *++ HMU!!! 3 flips. nollie flips. big flips. hardflips. - steez Youtube Channel My Build Log 95 Bonneville SSE - WALLED/4th Order - ~30 cubes - *thanks LoganBerry, CortezDVT, Cj18, SuperCharged DC, Ryan-RAM Designs,LoudNLow931*
CleanSierra Posted December 13, 2012 Report Posted December 13, 2012 I'm with Elflako on this one. Did you check your inline fuses? Under the hood? In the car? The power light will come on as long as the remote lead is giving the amp a signal, not TRULY if the amp is seeing power. *Edit- Saw that you said another worked on another amp. Are there fuses on the amp? If so, replace and try over. Im not the one you want to try to troll. Just a fyi for you.
Afficionado Posted December 13, 2012 Author Report Posted December 13, 2012 I checked my fuses, but like i said, another amp was working with all of the same wires =/. and as far as i can tell the amp does not have any replaceable fuses on it. tried other RCA'S, but again, another amp worked, so the subs are not the problem either. thanks everyone, but i'm still lost =[. If you have any questions relating to nutrition, lifting, or health in general, feel free to give me a PM and I will give you straight forward advice with no BS involved.
kurupt305 Posted December 13, 2012 Report Posted December 13, 2012 diid you check the speaker terminals and or box terminals
Afficionado Posted December 13, 2012 Author Report Posted December 13, 2012 diid you check the speaker terminals and or box terminals i have the wires running from the speakers right through the port to the amp. I was going to check the speakers terminals, but i checked the subs on another amp and they worked so i figured there was no need to right? If you have any questions relating to nutrition, lifting, or health in general, feel free to give me a PM and I will give you straight forward advice with no BS involved.
Afficionado Posted December 13, 2012 Author Report Posted December 13, 2012 no idea if this matters at all, but when it gets power (the remote wire turns on) the amp makes one clicking sound. If you have any questions relating to nutrition, lifting, or health in general, feel free to give me a PM and I will give you straight forward advice with no BS involved.
Watch the bass Posted December 13, 2012 Report Posted December 13, 2012 Did you messure your RCA output on your HU? "in the abundance of water, the fool is thirsty" Bob Marley
Recommended Posts
Archived
This topic is now archived and is closed to further replies.