Skullz Posted January 11, 2013 Report Share Posted January 11, 2013 What's worse is he isn't even using the proper width belt for it. You can see where it can use a two rib wider belt than is being currently used. 01 Ford focus ZX3 Pioneer AVH-X491BHS PPI PC 4800.2 Morel Maximo 6.5" x2 Link to comment Share on other sites More sharing options...
SnowDrifter Posted January 11, 2013 Report Share Posted January 11, 2013 Or that's the pulley that came with the alt and the rest of his car doesn't take that wide of a belt ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444 Link to comment Share on other sites More sharing options...
8ight Posted January 11, 2013 Report Share Posted January 11, 2013 Or that's the pulley that came with the alt and the rest of his car doesn't take that wide of a belt A regarded member showed a sign of displeasure, dogpile! I'm gonna hate Link to comment Share on other sites More sharing options...
BeatBox Posted January 11, 2013 Report Share Posted January 11, 2013 They use those to connect pieces of all thread together. Check Lowes, Home Depot or Menards. those arent the same thread pitch for alternator, i think they are standard size and you need metric, well atleast i did. That's a BUNCH of cables on that Integra alt! HOLY SCHNIKES! i know i know, it worked for me. if it messed it up it would of been my fault What's worse is he isn't even using the proper width belt for it. You can see where it can use a two rib wider belt than is being currently used. no whats worse is that you dont know why its got the smaller belt the alternator is custom made from an acura tl that DO use the bigger belt, integras use the smaller belt because of how much room is between pulley's and engine compartment, if i was to change the width of the pulley the belt would line up at the bottom, SO THATS why its the way it is Or that's the pulley that came with the alt and the rest of his car doesn't take that wide of a belt DING DING DING OP no i dont have a link forgot where i got them from, ill try to look up the paper work, i ordered two and paid like $14 after shipping just get anywhere you can find it online aslong as its the right size Link to comment Share on other sites More sharing options...
shogen Posted January 11, 2013 Report Share Posted January 11, 2013 I'm not gonna read all these replies... but on my Camry I removed that black crap plastic and used a locking washer underneath and that gave me room for 2 - 0ga connectors.. BAM!!! Pioneer Premier P880PRS ll Front Stage: US Acoustics 4060 - Random speakers currently ll Sub Stage: Crescendo BC3500D - 15" Xcon sealed @ 3.28 cubes ll Electrical: - Kinetik HC1800(front) NEW***DieHard P-2(rear) beaker- I know this sounds like a lot of anime bullshit, but it is true. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.