Kyblack76 Posted February 28, 2013 Author Report Share Posted February 28, 2013 cool.. so, this seems VERY doable. And doable safely. Pics anyone? with what they are running? XX1?? SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
Kyblack76 Posted February 28, 2013 Author Report Share Posted February 28, 2013 hubcentric wheel adapters........much safer and better for the car than simply sticking spacer rings in there...2" is quite a bit I don't have an extreme amount of experience with them but I'm sure people who have will give you some input Oh dude,.. thank you!!.. There are HUBCENTRIC ones out there, that cost more.... Can you explain more??? well the thing that's best about hubcentric is that instead of just putting a spacer ring on and making less room for the lugnut to have on the wheel stud, a hubcentric wheel adapter actually extends the studs out so that the lugs can still have enough to screw on too. They also keep the wheel perfectly centered. With the hubcentrics you also won't get the nasty vibrations that non hubcentric spacer rings will give you...Not to mention that that lack of stud length for the lugnut is unsafe "hubcentric" means it has the center piece on the spacer. So it fits on your hub perfectly instead of being held on solely by the studs. There are spacers with studs and no hubcentric machines center AGAIN, THAT is the ONE answer i needed... thanks again bud!!.. im going on EBAY right now... SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
HunterJohnson Posted February 28, 2013 Report Share Posted February 28, 2013 before after can't find a picture Scion tC SQ BuildiPad mini, lots of fabrication, daily drivenFord Explorer C Pillar Wall Build Just a cheap car to destroy with bass Link to comment Share on other sites More sharing options...
Kyblack76 Posted February 28, 2013 Author Report Share Posted February 28, 2013 LOL WHAT???? SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
Kyblack76 Posted February 28, 2013 Author Report Share Posted February 28, 2013 Ok.. im on ebay now.. and will order now.... LOL And maybe run the purchase buy some of you.. LOL.. I just dont want a turd. SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
XX7R Posted February 28, 2013 Report Share Posted February 28, 2013 before after can't find a picture Fail lol. Op as long as you get some with hubcentric rings you should be good 1990 Nissan 300zx Twin Turbo - Summer Ride(No system yet, lookin to get it up to 450-500 horse first!)2006 Chevy Malibu - Daily DriverDC Level 5 15", 2 APSM-1500's, 3.88 cu. ft. tuned to 32hz1992 Honda Prelude - SOLD2 18" TC 3hp Woofers on a Crescendo BC3500.1d, 12.7 cu. ft. tuned to 35hz Link to comment Share on other sites More sharing options...
knowledge Posted February 28, 2013 Report Share Posted February 28, 2013 i ran them with no issues REFF'SMy linkEBAYhttp://feedback.ebay...ck&myworld=trueI love car audio so much because I will never be done. I can never win, and I will never get it finished or perfect. It always has me coming back for more, I can never get my fill of it, but I get what I need. Link to comment Share on other sites More sharing options...
xx1 Posted February 28, 2013 Report Share Posted February 28, 2013 sorry for the late reply couldn't find a better pic audio related merchandise (decals,banners,lanyards,hats,shirt,etc) Link to comment Share on other sites More sharing options...
Kyblack76 Posted February 28, 2013 Author Report Share Posted February 28, 2013 sorry for the late reply couldn't find a better pic Looks great. Obviously if you can run them on that weight hog, id be MORE than able on my lil ride. And these are the 1.25" width you spoke of? Correct? SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
sphinxbccp Posted February 28, 2013 Report Share Posted February 28, 2013 Do you plan on lowering it at all? If so you may want to wait on getting spacers. Having them flush with the body panels might cause rubbing if you lower it, with mine dropped and the weight of the system caused my back to sit low, if i spaced them out too much they would have rubbed the inner wheel well. Build log: Click Feedback: http://www.stevemead...xbccp-feedback/ 03 Chevy Blazer - IPad Air 2 - ALPINE Head Unit - 4 DC XL 18s - 2 DC 3.5k - ALPINE TYPE R 5.25 COMP - 3 ALPINE TYPE R 6.5 COMPs - DC 175.4 - DC HO Alt - D3400 - 4 XP3000s - KNU 0ga - 60 SqFt Damp Pro Lots more... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.