XX7R

How many people here have actually had any apsm's before you go hating on them about replacing them. I had two on my dc level 5 and it sounded amazing. They're great little budget amps. Although they do run a little warm. Just sold them due to me needing money for my 300zx build. "]http://[/url]

You really needed to make 3 of the same threads? Have you thought about just emailing nick or scott?..

Took the video with my droid so its not the best quality.. I had been bumping on and off for a few hours so voltage was a little low. It literally flexes every panel on the car! even the interior on the celing flexes even though you can't see it very well in the video. 145 amp stock alt, two 34 group yellow tops, one shuriken bt-20, one run of 4 gauge + and -, one run of 0 gauge +. When my batteries are charged up with the car running it sits at 14.3 with voltage drop to 13.8. http://

Holy crap that was a lot of info. If you had 4 d3100s fully charged and played 15,000 watts rms clamped, your voltage wouldn't stay up for very long with a mechman 270. Your feeding the batteries approximately 225-250 amps depending on what rpm your at. And your pulling around 1500 amps of power depending on the amp(s) . That wouldn't work out so well for daily for the op if he could only listen to his system for a little bit and then have to turn it down to let the batteries recharge. Just saying

With one single 270 amp alt you should be okay at around 4k rms. Depending on how efficient your amps are

You should have ATLEAST two 270 amp alts for 6-9k rms to have little voltage drop

You can't support 15k rms with a single 270 amp alternator...

I had a single vvx 12" on an mb quart onx1500.1 and it took it fine all day. Set the gains with a DD-1. You should be good. Mine never got warm or bottomed out. Also had more excursion then that video did... look at my sig for box specs

Looks pretty good to me. Now get to work and build that bad boy up!

An Fs of 17hz? damn...

lol...

Pics of said lude? Ive got a 92 H22A VTEC

I ran a BTL N2 15 on a bc3500 in a 3.8 cubic foot box & it took it fine

Haha whats up bro. It's all good. I'll hit you up when I get the cash. Alright sounds good!

Sorry man. Ill let you know when i get this whole thing straightened out with this guy. What don't people get when it says "Will ship to the US only!"??

I say Roscoe too. Pimp ass name

They have everything from subs to amps to batteries DC, AA, Sundown, XS power, Skar Just bought a skar vvx12 for 143 shipped!!! Fuck yes bitches! Sound Solutions Audio Store

No it wont. Unless your running like 10,000 watts lol

What kinda power are we talking about and what gauge wire?

alright thanks guys. I have like 8.5-10 cubic feet if i really wanted to make room so i dont think that that is crammed for space

Alright so im going to be building a box for two 8" subs and ive been looking into t-lines for their output. If anybody could help me design a t-line box for either two SA-8s or two Skar vvx 8's it would be greatly appreciated. Even any information or comments about them would be nice. My max dimensions are 36" width, 16.5" height, 30" depth Thanks Connor

My link This is where i got an H22 VTEC for my prelude. Still runs great

Huh?

Nice clean looking build. I like it!

Don't even think about doing this unless you know what your doing with tuning amps. If one is pushing more power than the other then one of the voice coils is going to be working harder than the other one which will cause them to die a lot sooner than they should. Get an amp that pushes out 2000-2500 wrms at 2 ohms. (unless you have the electrical to back up .5 which i doubt you do)