Ollierides Posted March 12, 2013 Report Share Posted March 12, 2013 Hi guy's , just bought a secondhand splx 15 dvc 2ohm , going to run at 1ohm off a 1400rms dtr soundstream amp . Please help me design a box !!! Medium size , Good for music but also hitting low for some shake (Y) maybe 32hz or 33 what you reckon ?? Want a basic rectangular port and will face this and the sub upward . Please can someone advise me on box dimensions . Either inches or mm for each piece , send me a link to a good box , and help me figure a good HZ tune . Thanks guys Ollie(16) from New Zealand Link to comment Share on other sites More sharing options...
Joe X Posted March 12, 2013 Report Share Posted March 12, 2013 Post vehicle model and max dimensions for a box. Link to comment Share on other sites More sharing options...
Ollierides Posted March 13, 2013 Author Report Share Posted March 13, 2013 Hi Joe it is a 1996 Toyota Caldina , sizes would be 3ft wide (36inchs) and 20inchs high and deep . maximum . Aiming for 32 , 33 , 34 tune . What do you think ?? Hope you can help me design my box . Cheers BTW am wanting to aim the sub and port upward toward the roofline Link to comment Share on other sites More sharing options...
Joe X Posted March 13, 2013 Report Share Posted March 13, 2013 In that kind of vehicle sub up/port back would likely give better results, either way I would need your max dims for a box and type of music you listen. Link to comment Share on other sites More sharing options...
Ollierides Posted March 13, 2013 Author Report Share Posted March 13, 2013 Listen to mostly Hip hop and some heavy bass tracks , want it low but still able to play music crisp . Looking for some good excursion and shake etc when cranked up . The max size the box could be is width of 36inchs , depth of 20inchs and height of 20inchs . Can you work anything out from this ?? Here is the subwoofer specification website ... http://www.soundstream.com/manuals/2009/SPLX-HX%20woofers.pdf Thanks , ollie Link to comment Share on other sites More sharing options...
Joe X Posted March 13, 2013 Report Share Posted March 13, 2013 So here is a suggestion: Enclosure Specifications:Fb = 34 HzVb = 3.9 ft^3External Height = 16 inExternal Width = 36 inExternal Depth = 20 inPort Width = 4 inCut Sheet List:* All Dimensions in Inches.* Wood Thickness is 3/4 for all Parts.External Enclosure Parts:2 x Top & Bottom (3 parts) = 36 x 20Left & Right Sides =Side 1 = 18 1/2 x 13 3/4Side 2 = 19 1/4 x 13 3/4Front = 31 1/4 x 13 3/4Back = 36 x 13 3/4L Port Internal Assembly Parts:Front to Back = 14 1/2 x 13 3/4Extension = 4 3/4 x 13 3/4 Assembly guide (generic dimensions): Important notes:- The port needs 4" of free airspace in front of it for proper operation.- Setting your amp subsonic filter to 28Hz is suggested. Link to comment Share on other sites More sharing options...
Ollierides Posted March 14, 2013 Author Report Share Posted March 14, 2013 Joe you are just awesome , thankyou so much . Add me for a chat sometime Link to comment Share on other sites More sharing options...
Ollierides Posted March 15, 2013 Author Report Share Posted March 15, 2013 Hi joe , just one question . Why are the sides different lengths ?? thanks , hope you reply Link to comment Share on other sites More sharing options...
Joe X Posted March 15, 2013 Report Share Posted March 15, 2013 Here's why: Link to comment Share on other sites More sharing options...
Ollierides Posted March 15, 2013 Author Report Share Posted March 15, 2013 Thankyou very much Joe Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.