Trey_Dog650 Posted March 23, 2013 Report Posted March 23, 2013 kinda misread the website i guess Heat Tolerance- 300° F for 4 Hours (Highest Test) so i guess it could last for a little longer and higher heat but theres no point in cooking it like that. it was just a stress test 13 Kia Forte Build! 07 Hyundai Accent Build ***Super Seller*** N8ball2013 And then he gets to say ok all you guys were right. im sorry for being a dummy poo poo head.
Miguels Posted March 23, 2013 Report Posted March 23, 2013 Or burned his house down I'm pretty sure the failure point on most deadners is 300* for 4 hours. That guy probably destroyed his deadner lol I'm pretty sure the failure point on most deadners is 300* for 4 hours. That guy probably destroyed his deadner lol 4hrs ? I wouldnt do that haha... that video proves nothing.. too much editing too much opening and closing oven. not dogging technix or its quality but thats not a good test my logshttp://www.stevemead...-my-new-set-up/my blow through loghttp://www.stevemead...future-updates/ 96 ss http://www.stevemeadedesigns.com/board/topic/164094-96-impala-ss-build/
ImaNoob Posted March 23, 2013 Report Posted March 23, 2013 you can heat it up pretty high the more hot the more flex it has and sticks a lot more better .... there is a vid with a guy putting it in a oven for about 4hrs at 350 f just dont microwave it lol Or burned his house down I'm pretty sure the failure point on most deadners is 300* for 4 hours. That guy probably destroyed his deadner lol I'm pretty sure the failure point on most deadners is 300* for 4 hours. That guy probably destroyed his deadner lol 4hrs ? I wouldnt do that haha... I still wouldnt do that for 4 hrs for many reasons..Deadner will get super soft/Flexible with a hair dryer...Not to mention After 4 hrs, How the hell are you going to apply 350 degree deadner ? With oven mitts ? I would be worried about burrning Myself . Also what is in this deadner, do they have a MSDS sheet ? Idk just for testing then yes the video is cool, rather stupid for applying though IMO 2006 Dodge Ram 1500 Xs3400 1500BDCP FI BL 12 3sq @ 32hz Rockford t675 T400.2 Stinger Deadner Build Log Here
iROCKtheFOSgate Posted March 23, 2013 Report Posted March 23, 2013 im not saying to throw the damn thing in the oven then go apply it to your car nobody is obviously NOT gonna do that [sharedmedia=garage:vehicles:2273]
ImaNoob Posted March 23, 2013 Report Posted March 23, 2013 LoL, Haha..I thought thats what you where getting at.. 2006 Dodge Ram 1500 Xs3400 1500BDCP FI BL 12 3sq @ 32hz Rockford t675 T400.2 Stinger Deadner Build Log Here
Trey_Dog650 Posted March 23, 2013 Report Posted March 23, 2013 Yeah to heat it up you were like oh you can put it in an over for 350 for 4 hours lol 13 Kia Forte Build! 07 Hyundai Accent Build ***Super Seller*** N8ball2013 And then he gets to say ok all you guys were right. im sorry for being a dummy poo poo head.
iROCKtheFOSgate Posted March 23, 2013 Report Posted March 23, 2013 no but from the video my guess is you can heat it up pretty good b4 installing but not heat it up were you can cook eggs on it [sharedmedia=garage:vehicles:2273]
Trey_Dog650 Posted March 23, 2013 Report Posted March 23, 2013 Haha yeah that's a stress test for when it's installed the temps it can take in a car... Anyways just heat it up a little should be no biggie! I'd let the car warm up with the heater on so the whole car inside gets warm. Also heats up the panels so they are a little more flexible as well 13 Kia Forte Build! 07 Hyundai Accent Build ***Super Seller*** N8ball2013 And then he gets to say ok all you guys were right. im sorry for being a dummy poo poo head.
iROCKtheFOSgate Posted March 23, 2013 Report Posted March 23, 2013 CLEAN AND PREP !!!!!! no.1 problem [sharedmedia=garage:vehicles:2273]
Amart88 Posted March 24, 2013 Report Posted March 24, 2013 I remember a thread a while back and Jon from second skin warned that if you heat it too much with a heat gun it can actually cook the material rendering it useless. iirc I'm not saying don;t heat it up, be careful that's all. My 2005 s10 blazer build. 4 zcon 18's walled.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.