bcbrassard Posted January 23, 2016 Report Share Posted January 23, 2016 Gille then to keep them protected, If they where in the A-piller than grille less. Link to comment Share on other sites More sharing options...
Wood Posted January 23, 2016 Author Report Share Posted January 23, 2016 Gille then to keep them protected, If they where in the A-piller than grille less. Last night I did all the calculations for the new ring and I'll most likely grill it after looking at the way it'll stick out a little more than last time 2011 Nissan Altima aka Red Ruby HEADUNIT: Pioneer AVH X2700BS ELECTRICAL: -Singer 230a -Northstar gr34 -(2) Northstar SMS220 w/ Custom Terminals from 12V Metalworkz -100% Welding Cable FRONT STAGE:-(2 Sets) Hertz HSK165 -Hertz HSK130 -Ampere Audio 125.4 SUB STAGE: -(3) Sundown Audio SA REV2 12's -Ampere Audio 3800.1 V2 MISC (NON AUDIO RELATED): -Interior & Exterior Lights LED -Gloss Black Roof (PAINTED) -15% Front, 5% Rear Tint -Roof Spoiler -20" TSW Snettertons (20x8.5 front, 20x10 rear) -Custom Projector Retrofit (FX-R 3.0, 6.5k HID, Morimoto Mini H1 (faux projector), Quad Starry Night Halos) ----- COMING SOON!! -Aftermarket Fog Lights -Custom Painted Engine Covers My Build Log: http://www.stevemeadedesigns.com/board/topic/169869-woods-2011-altima-aka-red-ruby-new-video-more-updates/page-109 Retrofit Build Log: http://www.stevemeadedesigns.com/board/topic/185787-hid-projector-retrofitting-diy-by-wood/#entry2765346 Link to comment Share on other sites More sharing options...
Wood Posted January 26, 2016 Author Report Share Posted January 26, 2016 So yesterday and a little bit of today, I was finally able to put some work into my door panels... So far so good I'll show ya'll the pics and explain how everything is gonna work this time around! Let the games begin!! Behind every set of nice doors, Is a lot of f*cking planning lol After a "little bit" of counter sinking hehe And here she is!! The end result!! One down, one to go!! I'll be layering it with another 3/4" piece of MDF so that it is more rigid.. also with a height of 1" total, I'll be able to mount the ring directly to the panel without needing dowels to prop it up for clearance, which means I can Glue AND Screw the ring to the panel for the ultimate mount!! Also I made up my mind and will be planning to make speaker grills this time around!! Should come out pretty nice!! I'm excited for these plans to come to life!! 2011 Nissan Altima aka Red Ruby HEADUNIT: Pioneer AVH X2700BS ELECTRICAL: -Singer 230a -Northstar gr34 -(2) Northstar SMS220 w/ Custom Terminals from 12V Metalworkz -100% Welding Cable FRONT STAGE:-(2 Sets) Hertz HSK165 -Hertz HSK130 -Ampere Audio 125.4 SUB STAGE: -(3) Sundown Audio SA REV2 12's -Ampere Audio 3800.1 V2 MISC (NON AUDIO RELATED): -Interior & Exterior Lights LED -Gloss Black Roof (PAINTED) -15% Front, 5% Rear Tint -Roof Spoiler -20" TSW Snettertons (20x8.5 front, 20x10 rear) -Custom Projector Retrofit (FX-R 3.0, 6.5k HID, Morimoto Mini H1 (faux projector), Quad Starry Night Halos) ----- COMING SOON!! -Aftermarket Fog Lights -Custom Painted Engine Covers My Build Log: http://www.stevemeadedesigns.com/board/topic/169869-woods-2011-altima-aka-red-ruby-new-video-more-updates/page-109 Retrofit Build Log: http://www.stevemeadedesigns.com/board/topic/185787-hid-projector-retrofitting-diy-by-wood/#entry2765346 Link to comment Share on other sites More sharing options...
bcbrassard Posted January 26, 2016 Report Share Posted January 26, 2016 Hell ya, your off to a good start man! Link to comment Share on other sites More sharing options...
Wood Posted January 26, 2016 Author Report Share Posted January 26, 2016 Hell ya, your off to a good start man! Thanks bro!! I definitely plan to make this my best work!! Last set of doors were nice, but they had cosmetic flaws.. I'm going to make sure these babies are on point!! 2011 Nissan Altima aka Red Ruby HEADUNIT: Pioneer AVH X2700BS ELECTRICAL: -Singer 230a -Northstar gr34 -(2) Northstar SMS220 w/ Custom Terminals from 12V Metalworkz -100% Welding Cable FRONT STAGE:-(2 Sets) Hertz HSK165 -Hertz HSK130 -Ampere Audio 125.4 SUB STAGE: -(3) Sundown Audio SA REV2 12's -Ampere Audio 3800.1 V2 MISC (NON AUDIO RELATED): -Interior & Exterior Lights LED -Gloss Black Roof (PAINTED) -15% Front, 5% Rear Tint -Roof Spoiler -20" TSW Snettertons (20x8.5 front, 20x10 rear) -Custom Projector Retrofit (FX-R 3.0, 6.5k HID, Morimoto Mini H1 (faux projector), Quad Starry Night Halos) ----- COMING SOON!! -Aftermarket Fog Lights -Custom Painted Engine Covers My Build Log: http://www.stevemeadedesigns.com/board/topic/169869-woods-2011-altima-aka-red-ruby-new-video-more-updates/page-109 Retrofit Build Log: http://www.stevemeadedesigns.com/board/topic/185787-hid-projector-retrofitting-diy-by-wood/#entry2765346 Link to comment Share on other sites More sharing options...
jcarter1885 Posted January 26, 2016 Report Share Posted January 26, 2016 Hell of a start bro, did you get new tweeters yet? Nav-TV Zen V Audio Interface AudioControl DM-608 (2) Stevens Audio Neo-Comp Full-Size Horns (4) Faital Pro 6PR160 6.5" AudioControl LC-6.1200 (1) Fi Neo 4.7 15" D2 in 3.74 Cubic Feet @ 27.70 Hz Ampere Audio AA3800.1 Odyssey ODP-AGM48 Battery (Starting) Odyssey ODX-AGM31 Battery (Trunk) Big 3 - 2\0 Welding Cable, KnuKonceptz Speaker Wire & 1/0 Power Cable, NVX RCAs, Second Skin (Speaker Tweaker Pads, Damplifier Pro Mat), Diode Dynamics LEDs Link to comment Share on other sites More sharing options...
Wood Posted January 26, 2016 Author Report Share Posted January 26, 2016 Hell of a start bro, did you get new tweeters yet? We'll I was doing some tuning before I uninstalled because I thought everything would be in the spare.. come to find out, the tweets were just blended that well where it wasn't ear piercing... Also another set of tweeters do come with the HSK130s, so all tweeter holes on the a pillar will be filled!! I'm basically gonna bridge the 2 sets of hsk165s on 2 channels and on the other two channels just run the HSK130 mids .. I'll set the crossvers and gains at the amp to blend the vocal range (perks of ampere amps ) 2011 Nissan Altima aka Red Ruby HEADUNIT: Pioneer AVH X2700BS ELECTRICAL: -Singer 230a -Northstar gr34 -(2) Northstar SMS220 w/ Custom Terminals from 12V Metalworkz -100% Welding Cable FRONT STAGE:-(2 Sets) Hertz HSK165 -Hertz HSK130 -Ampere Audio 125.4 SUB STAGE: -(3) Sundown Audio SA REV2 12's -Ampere Audio 3800.1 V2 MISC (NON AUDIO RELATED): -Interior & Exterior Lights LED -Gloss Black Roof (PAINTED) -15% Front, 5% Rear Tint -Roof Spoiler -20" TSW Snettertons (20x8.5 front, 20x10 rear) -Custom Projector Retrofit (FX-R 3.0, 6.5k HID, Morimoto Mini H1 (faux projector), Quad Starry Night Halos) ----- COMING SOON!! -Aftermarket Fog Lights -Custom Painted Engine Covers My Build Log: http://www.stevemeadedesigns.com/board/topic/169869-woods-2011-altima-aka-red-ruby-new-video-more-updates/page-109 Retrofit Build Log: http://www.stevemeadedesigns.com/board/topic/185787-hid-projector-retrofitting-diy-by-wood/#entry2765346 Link to comment Share on other sites More sharing options...
bcbrassard Posted January 26, 2016 Report Share Posted January 26, 2016 Hell of a start bro, did you get new tweeters yet? We'll I was doing some tuning before I uninstalled because I thought everything would be in the spare.. come to find out, the tweets were just blended that well where it wasn't ear piercing... Also another set of tweeters do come with the HSK130s, so all tweeter holes on the a pillar will be filled!! I'm basically gonna bridge the 2 sets of hsk165s on 2 channels and on the other two channels just run the HSK130 mids .. I'll set the crossvers and gains at the amp to blend the vocal range (perks of ampere amps ) Tune it right and its going to sound killer! Link to comment Share on other sites More sharing options...
Wood Posted January 26, 2016 Author Report Share Posted January 26, 2016 Hell of a start bro, did you get new tweeters yet? We'll I was doing some tuning before I uninstalled because I thought everything would be in the spare.. come to find out, the tweets were just blended that well where it wasn't ear piercing... Also another set of tweeters do come with the HSK130s, so all tweeter holes on the a pillar will be filled!! I'm basically gonna bridge the 2 sets of hsk165s on 2 channels and on the other two channels just run the HSK130 mids .. I'll set the crossvers and gains at the amp to blend the vocal range (perks of ampere amps ) Tune it right and its going to sound killer! Tuning is my specialty haha 2011 Nissan Altima aka Red Ruby HEADUNIT: Pioneer AVH X2700BS ELECTRICAL: -Singer 230a -Northstar gr34 -(2) Northstar SMS220 w/ Custom Terminals from 12V Metalworkz -100% Welding Cable FRONT STAGE:-(2 Sets) Hertz HSK165 -Hertz HSK130 -Ampere Audio 125.4 SUB STAGE: -(3) Sundown Audio SA REV2 12's -Ampere Audio 3800.1 V2 MISC (NON AUDIO RELATED): -Interior & Exterior Lights LED -Gloss Black Roof (PAINTED) -15% Front, 5% Rear Tint -Roof Spoiler -20" TSW Snettertons (20x8.5 front, 20x10 rear) -Custom Projector Retrofit (FX-R 3.0, 6.5k HID, Morimoto Mini H1 (faux projector), Quad Starry Night Halos) ----- COMING SOON!! -Aftermarket Fog Lights -Custom Painted Engine Covers My Build Log: http://www.stevemeadedesigns.com/board/topic/169869-woods-2011-altima-aka-red-ruby-new-video-more-updates/page-109 Retrofit Build Log: http://www.stevemeadedesigns.com/board/topic/185787-hid-projector-retrofitting-diy-by-wood/#entry2765346 Link to comment Share on other sites More sharing options...
evermaxx Posted January 26, 2016 Report Share Posted January 26, 2016 moar pics! Team Subsonic Lows Get your garbage EMF products of my amp bitch Man....it makes a nice work bench Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.