reg93f150 Posted August 1, 2013 Report Posted August 1, 2013 O,o.. if someone was to decide to run below 2 ohms.. how much ventilation would be recommended? Quote ALL CREDIT TO XX1 FOR DC BANNER down rpping vanderbilt. 30 miles from victoria. i own the 3rd loudest setup here out of 3. but i did put together all 3 setups strapping 2 amps together ? like bolting them next together? using bungy cables to hold them down? or wiring separate amps to each sub
SnowDrifter Posted August 1, 2013 Report Posted August 1, 2013 O,o.. if someone was to decide to run below 2 ohms.. how much ventilation would be recommended? Couple fans blowing on it Quote ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444
CJ18 Posted August 1, 2013 Report Posted August 1, 2013 (edited) voids warranty, amp doesnt like it but what do i know Not the question he asked. Yes it voids the warranty, but what do I know about the amps capability. If you have a problem with something I have said, take it up with me and dont go make a facebook status about it. Edited August 1, 2013 by CJ18 Quote
corona_jeff Posted August 1, 2013 Report Posted August 1, 2013 I have also ran mine at 1.33, however it does get hot. I used my truck for an out door wedding where there was no power. I ran it for about 9hours straight, with no issues. However it was pretty hot at the end. Outside temp was around 90 degrees that day as well. Quote
reg93f150 Posted August 1, 2013 Report Posted August 1, 2013 O,o... that sounds good then haha, has anyone clamped lower then 2 ohms maybe? Quote ALL CREDIT TO XX1 FOR DC BANNER down rpping vanderbilt. 30 miles from victoria. i own the 3rd loudest setup here out of 3. but i did put together all 3 setups strapping 2 amps together ? like bolting them next together? using bungy cables to hold them down? or wiring separate amps to each sub
SnowDrifter Posted August 1, 2013 Report Posted August 1, 2013 What if, instead of wiring lower to get more power, you purchase a second amp? That way you get even MORE power while maintaining a reliable daily setup? Quote ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444
Trey_Dog650 Posted August 1, 2013 Report Posted August 1, 2013 What if, instead of wiring lower to get more power, you purchase a second amp? That way you get even MORE power while maintaining a reliable daily setup?Blasphemy .5 ohm or bust Quote 13 Kia Forte Build! 07 Hyundai Accent Build ***Super Seller*** N8ball2013 And then he gets to say ok all you guys were right. im sorry for being a dummy poo poo head.
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.