SnowDrifter Posted August 13, 2013 Report Share Posted August 13, 2013 Don't do it man. Single digits. That's nightmare fuel right there. ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444 Link to comment Share on other sites More sharing options...
Cox Posted August 13, 2013 Report Share Posted August 13, 2013 Does he just not understand???? Kenwood Excelon x396AQ2200Fi Q 12XS D3400 XS XP30001/0 RADAFLEXStinger volt meter Mechman 240a alt Link to comment Share on other sites More sharing options...
rockFord_Expedition Posted August 13, 2013 Report Share Posted August 13, 2013 I don't even want to know what he was dropping to I think i have a hand held volt meter, i should see how bad it is xD You're doing installs, wait, you did an install in a friends ride? And you're just now going to check to see if you have a DMM? Did I miss something? Old School/New School RF Build March 2015 SOTM Winner How to crimp large wire Link to comment Share on other sites More sharing options...
_paralyzed_ Posted August 13, 2013 Report Share Posted August 13, 2013 I don't even want to know what he was dropping to I think i have a hand held volt meter, i should see how bad it is xD You don't know if you have a voltmeter? You must be super serious about 12v electronics. Link to comment Share on other sites More sharing options...
Neckbeard Posted August 13, 2013 Author Report Share Posted August 13, 2013 I don't even want to know what he was dropping to I think i have a hand held volt meter, i should see how bad it is xD You're doing installs, wait, you did an install in a friends ride? And you're just now going to check to see if you have a DMM? Did I miss something? I had it turned all the way down when it was installed -.- he did that vid by himself, i wasnt there. I wouldnt allow him to let it get that bad Build log, Super slow!!: http://www.stevemeadedesigns.com/board/topic/168096-slow-neckbeards-1970-opel-gt/ Link to comment Share on other sites More sharing options...
Neckbeard Posted August 13, 2013 Author Report Share Posted August 13, 2013 I don't even want to know what he was dropping to I think i have a hand held volt meter, i should see how bad it is xD You don't know if you have a voltmeter? You must be super serious about 12v electronics. Not my tools, Have yet to build my own set, so i use my dads. Don't be a asshole Build log, Super slow!!: http://www.stevemeadedesigns.com/board/topic/168096-slow-neckbeards-1970-opel-gt/ Link to comment Share on other sites More sharing options...
Sutliff Posted August 16, 2013 Report Share Posted August 16, 2013 If he was MY buddy, I wouldn't even touch it. I'd probably get a finger pointed at me when the amp goes from a low signal. BeetleJuice! Zeke '14 2003 Chevy Monte Carlo SS Vehicle Details & Mod List: http://www.stevemeadedesigns.com/board/garage/vehicle/1703-chevrolet-monte-carlo-ss/ Audio Build Log: http://www.stevemeadedesigns.com/board/topic/143276-2003-chevy-monte-carlo-ss-audio-build-ib-build Pioneer FH-P8000BT Infinity Kappa Perfect 6.1 Fi IB3 (Two 12", 2-ohm SVC) RF T400-2 & T500-1bdCP MechMan S Series 240A XS Power D3400 & D975 Link to comment Share on other sites More sharing options...
Amart88 Posted August 16, 2013 Report Share Posted August 16, 2013 My 2005 s10 blazer build. 4 zcon 18's walled. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.