6 Punch 12's in a kia sorento

[CTANNER1074]

Well i did some more measuring today and found that i do have room for 8 12's in a sealed enclosure, so now thats the plan. Found a prebuilt sub box thats built for 4 12's with four sealed chambers per box, so im gonna order two of them and bolt them together. With the rear seats folded down i have 5' 1" from front seat backs to the rear hatch available and the boxes are 52" long by 14" wide. From wheel well to wheel well i have 44" so i should have 8" +/- front to back and 16" +/- side to side left over. These boxes are built with 1.6 CU. FT. Per chamber so with the woofer displacement, i should get 1.42 CU. FT. Its a little bigger than i wanted so i will probably end up putting in some 2×4's in there to add extra support, but also to take up a little more room so i will be closer to the air space im looking for. Should have everything i need for the build within two or three weeks. I will start posting the build as soon as i get started.

[Smoove]

Per-fab sealed boxes and Jensen Amps. I have to see this now, make it happen.

[Tecomah]

Per-fab sealed boxes and Jensen Amps. I have to see this now, make it happen.

this is gonna be good

[bighossf150]

Whyyyyyy