bcbrassard Posted April 25, 2014 Author Report Share Posted April 25, 2014 Coming along great, the hard work sanding will pay off once the box is all done. I suppose, your not going seeing much but it will be fairly clean. Far from perfect. I could jig saw the sub holes out but i paid $40 for the jig so i will wait. So maybe 2 weeks i will be able to swap subs out. We'll see. Have to remove everything from trunk to do it. Link to comment Share on other sites More sharing options...
oldsoundguy Posted April 25, 2014 Report Share Posted April 25, 2014 I need to change my screen name LOL Oh and I bought a jasper jig. Love it. You can make speaker rings pretty quick. 80prs Arc Audio Xdi 1200.6 (using active crossovers) Freaking awesome amplifier Incriminator IA 10.1 Focal PS 130v 5.25 (doors) 4" Faital pro Neo (kick panels) 3" Faital pro Neo and focal tweets( dash) DC Audio level 3 12" custom box designed by joex built by me AGM front, XS 750SE batteries rear DC 180 alt 99 Toyota Tacoma extra cab http://www.stevemeadedesigns.com/board/topic/179476-my-small-build-turned-into-the-ongoing-build/ Link to comment Share on other sites More sharing options...
alaskanzx5 Posted April 25, 2014 Report Share Posted April 25, 2014 I might stop by to get some speaker rings and cut outs for subs done sometime. Whenever I can get my build started. t1500bdcp 2 t2d4 15" 1 t600.4 1 t400.2 1 set p1 tweets singer alt, tons of wiring, smd vm-1, 80prs, back seat delete, still in the works, aiming for a 145-147 with the ability to play 25hz up to 50hz. Link to comment Share on other sites More sharing options...
bcbrassard Posted April 25, 2014 Author Report Share Posted April 25, 2014 I need to change my screen name LOL Oh and I bought a jasper jig. Love it. You can make speaker rings pretty quick. Ya i got to watch a youtube video on how to use it. Dont want to fuck up the box. I have like a 2x2 peice of mdf left i was going to make some rings up for future use. Link to comment Share on other sites More sharing options...
bcbrassard Posted April 25, 2014 Author Report Share Posted April 25, 2014 I might stop by to get some speaker rings and cut outs for subs done sometime. Whenever I can get my build started. Ya sure, live in South Anchorage so if your going to drive in might as well make a day of it. Link to comment Share on other sites More sharing options...
oldsoundguy Posted April 25, 2014 Report Share Posted April 25, 2014 I need to change my screen name LOL Oh and I bought a jasper jig. Love it. You can make speaker rings pretty quick. Ya i got to watch a youtube video on how to use it. Dont want to fuck up the box. I have like a 2x2 peice of mdf left i was going to make some rings up for future use. Just make sure when cutting rings to secure the piece you are cutting down to another piece of scrap. Also when measuring when cutting the outside of the ring you measure to the inside of the bit and then cutting the inside you measure to the outside of the bit. Does that make sense? So if I remember you can set the dowel on the jig to the outside measurement and it will be correct but if you try to cut the inside of the ring by using the measurements on the jig it will be off my the width of the bit. Or maybe its the other way around. Damn who knows I just OLD. lol 80prs Arc Audio Xdi 1200.6 (using active crossovers) Freaking awesome amplifier Incriminator IA 10.1 Focal PS 130v 5.25 (doors) 4" Faital pro Neo (kick panels) 3" Faital pro Neo and focal tweets( dash) DC Audio level 3 12" custom box designed by joex built by me AGM front, XS 750SE batteries rear DC 180 alt 99 Toyota Tacoma extra cab http://www.stevemeadedesigns.com/board/topic/179476-my-small-build-turned-into-the-ongoing-build/ Link to comment Share on other sites More sharing options...
bcbrassard Posted April 25, 2014 Author Report Share Posted April 25, 2014 Ya i watched a youtube vid, its seems simple but then again i could fuck up a wet dream! lol Getting old sucks! Link to comment Share on other sites More sharing options...
oldsoundguy Posted April 25, 2014 Report Share Posted April 25, 2014 Ya i watched a youtube vid, its seems simple but then again i could fuck up a wet dream! lol Getting old sucks! I practiced on a few pieces before I got started. I am glad I did. I actually will be using mine tomorrow to finally get some rings made for my second set of RE's I need to get them in soon. I will have the seats out to get the new sub amp in so I will be able to run some speaker wires under the carpet for them. I am stupid cause I didn't think about it when I had the whole interior out doing the MLV. I put it all back in and thought DAMN IT!! See who's old now. ME BITCH LOL 80prs Arc Audio Xdi 1200.6 (using active crossovers) Freaking awesome amplifier Incriminator IA 10.1 Focal PS 130v 5.25 (doors) 4" Faital pro Neo (kick panels) 3" Faital pro Neo and focal tweets( dash) DC Audio level 3 12" custom box designed by joex built by me AGM front, XS 750SE batteries rear DC 180 alt 99 Toyota Tacoma extra cab http://www.stevemeadedesigns.com/board/topic/179476-my-small-build-turned-into-the-ongoing-build/ Link to comment Share on other sites More sharing options...
bcbrassard Posted April 25, 2014 Author Report Share Posted April 25, 2014 Ya you better think of your next upgrades and run wires for them too while your at it. Small build my ass! LOL Link to comment Share on other sites More sharing options...
JNells Posted April 25, 2014 Report Share Posted April 25, 2014 Ya i watched a youtube vid, its seems simple but then again i could fuck up a wet dream! lol Getting old sucks! LOL!!! Love the banter between you 2! Malibu Build Log Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.