gattiboy13 Posted December 5, 2013 Author Report Posted December 5, 2013 Ok from what i know is that the wire he cut is the stock power wire
Miguels Posted December 5, 2013 Report Posted December 5, 2013 you need to make sure if he didnt delete anything.. maybe it was going to fuse box but cut it and went direct to battery.. see if there is any wire missing my logshttp://www.stevemead...-my-new-set-up/my blow through loghttp://www.stevemead...future-updates/ 96 ss http://www.stevemeadedesigns.com/board/topic/164094-96-impala-ss-build/
gattiboy13 Posted December 5, 2013 Author Report Posted December 5, 2013 Ok so I took a look and I called him, the wire he cut was cause stock positive and negative did not reach new battery post, they were too short, so he cut the down about 3-4 inches and added on some 0 gauge to extend them to post, so it was not cut to fuse thankfully, but just a few inches from battery post.
Bump4life Posted December 5, 2013 Report Posted December 5, 2013 post up pics of what everything looks like. then we can get a better understanding Buyer/Seller Feedback Thread: http://www.stevemead...5015-bump4life/ MB C220 153 Trunk Car Build Log: http://www.stevemead...d/#entry1840136 MB C280 Ipad Dash SQ Build Log: http://www.stevemeadedesigns.com/board/topic/194484-bump4lifes-new-benz-tony-c-relay-kit-pictures-ce-electric-audison-front-stage-installed/ My SPL Log: http://www.stevemead...__fromsearch__1 BMW M340 xDrive Stock, for now. Corner Load 10" maybe soon. But does 10s in the 1/4... Best Scores out of a trunk 153.0 sealed legal full tilt clamped 5524 @ 42 hz 154+ windows down, 155+ kick
gally Posted December 5, 2013 Report Posted December 5, 2013 Ok so I took a look and I called him, the wire he cut was cause stock positive and negative did not reach new battery post, they were too short, so he cut the down about 3-4 inches and added on some 0 gauge to extend them to post, so it was not cut to fuse thankfully, but just a few inches from battery post. he added 0 gauge wire to the stock wire?? should have changed all the wires and do a big 3 instead 2010 Chevrolet Cruze Radio --- pioneer mvh-200vbt Front/back --- alpine type s 6.5" Sub Control --- Pac LC1 Sub Amp --- GZPA 1.4K Sub --- GZNW 15XSPL D1 Battery - GZBP 12.2500X
DubNDodge Posted December 5, 2013 Report Posted December 5, 2013 I want to know how in the hell he soldered 0ga to 4ga. I have issues with soldering anything larger than 18ga together. '01 Dodge Stratass Sealed Trunk Build Log 2008 Honda Fit Sport Build Log On 10/3/2013 at 10:00 AM, ROLEXrifleman said: Anyone who says they knew everything they wanted out of life at 19 can go suck a bag of dicks cause they are lying to themselves or brought up in a cult.
gattiboy13 Posted December 5, 2013 Author Report Posted December 5, 2013 He said he has done this many times to cars. I will take some pics right now, but how do u upload them?
Bump4life Posted December 5, 2013 Report Posted December 5, 2013 He said he has done this many times to cars. I will take some pics right now, but how do u upload them? make a photo bucket account and then copy link of photos and put link in after you press picture button when you go to post on smd Buyer/Seller Feedback Thread: http://www.stevemead...5015-bump4life/ MB C220 153 Trunk Car Build Log: http://www.stevemead...d/#entry1840136 MB C280 Ipad Dash SQ Build Log: http://www.stevemeadedesigns.com/board/topic/194484-bump4lifes-new-benz-tony-c-relay-kit-pictures-ce-electric-audison-front-stage-installed/ My SPL Log: http://www.stevemead...__fromsearch__1 BMW M340 xDrive Stock, for now. Corner Load 10" maybe soon. But does 10s in the 1/4... Best Scores out of a trunk 153.0 sealed legal full tilt clamped 5524 @ 42 hz 154+ windows down, 155+ kick
Guest Posted December 5, 2013 Report Posted December 5, 2013 I can't think of how you can solder two different large wires like that together without using like a pound of solder. I'm curious what's under that heatshrink
Recommended Posts
Archived
This topic is now archived and is closed to further replies.