Randall Simpson Posted January 24, 2014 Author Report Posted January 24, 2014 1.5ft3 net per sub with 15in2 of port per ft3 should do nicely. Tuning will be up to you, 32-35hz is a good range to be in. Just put that in winisd and get port velocity of 74ft/s at 30 hz. As long as the vents are 45'd and a radius on the port exit. port noise should not be a problem correct? Quote
kirill007 Posted January 24, 2014 Report Posted January 24, 2014 1.5ft3 net per sub with 15in2 of port per ft3 should do nicely. Tuning will be up to you, 32-35hz is a good range to be in. Just put that in winisd and get port velocity of 74ft/s at 30 hz. As long as the vents are 45'd and a radius on the port exit. port noise should not be a problem correct? Shouldn't be a problem at all. Quote Thinking is the root of all problems... You ALWAYS get what you pay for.
WCA Rusty Posted January 24, 2014 Report Posted January 24, 2014 Pair of Level 2s gets my vote Quote DC AUDIO Phone Number 1(855)SPL-DBZZ Built by Competitors, for Competitors.
Randall Simpson Posted January 29, 2014 Author Report Posted January 29, 2014 (edited) Thanks everyone subs ordered My sound guy just sent me his design. He wants to go with 2.5 cubes with 37.5 square inches of port and tuned to 37.5 Hz. Edited January 29, 2014 by Randall Simpson Quote
Randall Simpson Posted January 30, 2014 Author Report Posted January 30, 2014 Sound guy said there was not enough room between the seats and the back hatch for a 3 cube box with a port tuned to 33. He is doing port back subs up. Quote
WCA Rusty Posted January 30, 2014 Report Posted January 30, 2014 Cool, post some pics when its done Quote DC AUDIO Phone Number 1(855)SPL-DBZZ Built by Competitors, for Competitors.
Randall Simpson Posted February 5, 2014 Author Report Posted February 5, 2014 (edited) Cool, post some pics when its done here ya go!! Ill get some daytime shots tomorrow after I tidy up the wiring. BTW these subs are awesome!!! https://www.dropbox.com/s/6ameylw3xuvgyc3/2014-02-04%2019.05.48.jpg Edited February 5, 2014 by Randall Simpson Quote
boom50cal Posted February 5, 2014 Report Posted February 5, 2014 Clean box. Sound great and get loud? Quote On 1/4/2013 at 9:31 PM, HatersGonnaHate said: Wow. 184 posts and I think you're a fucking asshole.
Randall Simpson Posted February 5, 2014 Author Report Posted February 5, 2014 Yeah its great just doesn't get super low. Hoping they will get a little lower once they break in. Quote
RooTxBeeR Posted February 5, 2014 Report Posted February 5, 2014 Yeah its great just doesn't get super low. Hoping they will get a little lower once they break in. Don't count on that TOO much. Quote On 11/20/2012 at 8:54 PM, AMI CUSTOMS said: Turned mine up today at a light, guy next to me his steering wheel started moving and he looked over at me like I was a magician lol. On 5/9/2012 at 8:45 PM, skittlesRgood said: fuck the plating. look at what the main metal used is. you could buy unicorn blood plated terminals but if its just covering up dog shit, whats the point On 4/10/2013 at 12:26 PM, mrd6 said: I'll admit, half way through sanding that fiberglass in the rain and cold while I was all itchy I was definitely starting to question why i was doing this haha Soon To Be '04 Ford Escape US Alternator 280A Hairpin D4800 Under the Hood (6) XP3000's in Rear 1/0 SHCA & XS Power 4 runs to back TORK2 kit from Tony @ CE Auto Supply Pioneer DEH-80PRS DD AW6.5 (2) per door *Tweeter Unkown* DD SS4a & C3d (2) SCV4000 @ .5Ohm (2) 15" Sundown Zv5
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.