KenC210 Posted March 4, 2014 Report Posted March 4, 2014 Just curious when I'm ready to place them in their location do i use 3m spray adhesive to get the to stick or is there a different way? Quote Kids Cadi Power Wheel Build2007 Ford Escape Build2012 Toyota Corolla Build 2013 Toyota Tundra
Turboelky Posted March 4, 2014 Report Posted March 4, 2014 Double side tape, mounting hardware that comes with them, what kind of tweeters? Never hard of spray adhering tweeters. Quote
KenC210 Posted March 4, 2014 Author Report Posted March 4, 2014 http://store.secondskinaudio.com/speaker-tweaker-kit-1/ These Double side tape, mounting hardware that comes with them, what kind of tweeters? Never hard of spray adhering tweeters. Quote Kids Cadi Power Wheel Build2007 Ford Escape Build2012 Toyota Corolla Build 2013 Toyota Tundra
Trill Posted March 4, 2014 Report Posted March 4, 2014 (edited) From their site One Speaker Kit contains: (2) 7" diameter Second Skin back wave canceling discs*Super Glue required to adhere speaker pad properly But spray adhesive could work well too I imagine. Just make sure to spray both surfaces and let it tack up first. Edited March 4, 2014 by Trill Quote Minnesota! Y U NO GET WARM!
KenC210 Posted March 4, 2014 Author Report Posted March 4, 2014 From their site One Speaker Kit contains: (2) 7" diameter Second Skin back wave canceling discs*Super Glue required to adhere speaker pad properly Oh well hell I must have not seen that part of it. Thank you for the help I was looking at the site a little while ago as well. Super glue then it is I was just not sure. Quote Kids Cadi Power Wheel Build2007 Ford Escape Build2012 Toyota Corolla Build 2013 Toyota Tundra
Trill Posted March 4, 2014 Report Posted March 4, 2014 No problem. Like I said in my edit in my original post, the spray adhesive should work too if you have some on hand. I'd probably try that over superglue because superglue gets hard and brittle. But I'm no pro and have no experience with that item so its up to you. Can't go wrong following the manufacturer's recommendations Quote Minnesota! Y U NO GET WARM!
emperorjj1 Posted March 4, 2014 Report Posted March 4, 2014 i dont think spray adhesive would hold the rubber to be honest Quote J. JMy CardomainFINISHED COBALT SS/SC DUAL ALTERNATOR PICS theres no such thing as too expensive when it comes to upgrades like that, because imo if you are gonna spend to upgrade then do it correctly rather then be a cheap ass ricer
KenC210 Posted March 4, 2014 Author Report Posted March 4, 2014 What about contact cement? Quote Kids Cadi Power Wheel Build2007 Ford Escape Build2012 Toyota Corolla Build 2013 Toyota Tundra
emperorjj1 Posted March 4, 2014 Report Posted March 4, 2014 that might work... matbe better then super glue too idk thou i havent installed mine yet Quote J. JMy CardomainFINISHED COBALT SS/SC DUAL ALTERNATOR PICS theres no such thing as too expensive when it comes to upgrades like that, because imo if you are gonna spend to upgrade then do it correctly rather then be a cheap ass ricer
gr8handogoatness Posted March 4, 2014 Report Posted March 4, 2014 Let us know how you like then. I have some weird resonance in the doors occasionally but I haven't bought them yet because I'm planning on glassing some door pods so I figured I should wait and see how the new set up sounds. But if they work well I might just get some anyway. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.