Miguels Posted August 15, 2014 Report Posted August 15, 2014 who ever defends the budget deal is full of crap.. yes you can buy 2 maybe even 3 amps to get same power.. the questions are, will they be efficient? will they sound good? is it clean power? will the last a long time? ive bought many budget amps and they fail after a year or dont sound as good as good quality amps.. then i have to go on and buy another budget amp. do the math.. $300 x 5 = $1500.. how long has Steve ran his without an issue? sometimes its more expensive to go the cheaper rout my logshttp://www.stevemead...-my-new-set-up/my blow through loghttp://www.stevemead...future-updates/ 96 ss http://www.stevemeadedesigns.com/board/topic/164094-96-impala-ss-build/
alaskanzx5 Posted August 15, 2014 Report Posted August 15, 2014 Where's the t1500.1bdcp results? Waiting on that to be done t1500bdcp 2 t2d4 15" 1 t600.4 1 t400.2 1 set p1 tweets singer alt, tons of wiring, smd vm-1, 80prs, back seat delete, still in the works, aiming for a 145-147 with the ability to play 25hz up to 50hz.
GassenD Posted August 15, 2014 Report Posted August 15, 2014 I got.my SQ2200 clamped @ 1ohm with impedance rise up to 3.1ohm got 1428.. '97 Explorer2 Sundown SA 15's SQ 2200D Kinetik KHC1800 (Front) Kinetik KHC 2000 (Back) KnuKonceptz 1/0 OFC 130A Alt + Big 3
Kyblack76 Posted August 15, 2014 Report Posted August 15, 2014 SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold
Ahmed Johnson Posted August 16, 2014 Report Posted August 16, 2014 The soundqubed 2200 has been tested and the results are in...if you're a soundqubed fan you may want to exit the thread now...the results surprised even me.... any final guesses or words before i post the result? Let me start a for sale thread first, lol!
Miguels Posted August 16, 2014 Report Posted August 16, 2014 I got.my SQ2200 clamped @ 1ohm with impedance rise up to 3.1ohm got 1428.. how accurate is your method? my logshttp://www.stevemead...-my-new-set-up/my blow through loghttp://www.stevemead...future-updates/ 96 ss http://www.stevemeadedesigns.com/board/topic/164094-96-impala-ss-build/
GassenD Posted August 16, 2014 Report Posted August 16, 2014 It's not on a dyno or anything,I just got clamped at a competition I was at. Im not sure when my HU clips but had volume 35/50 and that's where my Clip light on my amp starts to flicker. Did a 145.8 @ 45hz on 1428watts.. '97 Explorer2 Sundown SA 15's SQ 2200D Kinetik KHC1800 (Front) Kinetik KHC 2000 (Back) KnuKonceptz 1/0 OFC 130A Alt + Big 3
evermaxx Posted August 16, 2014 Report Posted August 16, 2014 .....hours later. Team Subsonic Lows Get your garbage EMF products of my amp bitch Man....it makes a nice work bench
REH Posted August 16, 2014 Report Posted August 16, 2014 Well, I guess he didn't want to share the results today?
Afficionado Posted August 17, 2014 Author Report Posted August 17, 2014 Where's the t1500.1bdcp results? Waiting on that to be done I don't have a T1500, so there won't be any results for that in the near future. Based on my T2500, i expect the t1500 will do well over rated. and to everyone else, SORRY! Hiked a mountain today with some friends. It was a great time, a great experience, and beautiful...but i know you guys don't care anything about that... So onto the results! The absolute BEST we could get out of this amp on a burp @ 1.3 ohms was 2157 and that was starting at 15.1 volts. On any non-burps we couldn't get above 1900. when rolling the volume up the best was 1863. Maybe a clean 1.0 ohms would help it. I'm going to keep my opinion to myself and let you guys discuss. Also feel free to ask me any questions. If you have any questions relating to nutrition, lifting, or health in general, feel free to give me a PM and I will give you straight forward advice with no BS involved.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.