Jump to content
Second Skin Audio

Clipping problem


SundownZ71

Recommended Posts

Posted

also set you eq to flat, turn your bassboost and loud off ect. have you changed anything since you got the car back from the shop that set it all up?

I got a new head unit because the last one only had 2v and my new pioneer has 5, everything on the head unit is flat except for the sub level which is at full (6)

you have the sub level set at 6??? What volume do you listen to it at like 5? lol mine is set in the negatives

2007 Ford F-150 Reg. Cab. Flareside
250 Mechman Alternator
Sky High Car Audio Big 3
XS Power D3400
Rockford Fosgate 1/0 amp kit
Rockford Fosgate T1500-1bdcp
Rockford Fosgate T400-4
DC Audio Lvl 4 12"
Rockford Fosgate Punch 6.5" component
Rockford Fosgate Punch 6x8
Pioneer AVH-P2300DVD
SMD Volt Meter

Posted

Just use a dd-1 or oscope cause you definately clipping. Having your sub level full isn't an issue as long as its clean and undistorted.

Vw Polo

Pioneer Deh-6050UB

Sundown Saz-3500d

DD Audio 9500 15''

5.5 cubic feet box with 10 inch port @ 38hz

I live to hear the Bass drop!!!

Posted

If the shop set your gain with your old 2 volt headunit, and you've swapped one in with 5 volt preouts... Your gain is extremely too high.

Posted

Some radios don't put out full rca voltage unless the sub level is all the way up or close to it. My alpine 9886 can go full volume with sub level at 15/15 and still put out clean signal. It all depends on the head unit.

Posted

Well when I was saying something about his sub level, I wasn't saying that turning it full would make it clip. I was saying if you have your sub level full and the rest flat then most of the time you're not going to be able to turn the volume very high before the bass is overpowering your mids and highs and there's no point in having a max volume of let's say about 40 if you're not going to utilize all of it to the point right before clipping. But of course that's completely preference.

2007 Ford F-150 Reg. Cab. Flareside
250 Mechman Alternator
Sky High Car Audio Big 3
XS Power D3400
Rockford Fosgate 1/0 amp kit
Rockford Fosgate T1500-1bdcp
Rockford Fosgate T400-4
DC Audio Lvl 4 12"
Rockford Fosgate Punch 6.5" component
Rockford Fosgate Punch 6x8
Pioneer AVH-P2300DVD
SMD Volt Meter

Posted

If the shop set your gain with your old 2 volt headunit, and you've swapped one in with 5 volt preouts... Your gain is extremely too high.

This.

2010 F150 FX4
-18" AA Mayhem
-Crescendo BC3500d
-Pioneer GM-D9500F 4-channel
-2 Crescendo FT1

-2 Crescendo Neo Forte 6.5

-Pioneer AVH-P3300BT
-6000K HID Headlights/Fog lights
-All LED interior lighting
-20% tint on front windows, 1% rear windows, 5% windshield strip
-Big3 (XSFlex 0ga)

-DC Power 270XP

-Group 65 NorthStar AGM battery

Coming soon/plans:

-Build log
-Blacked out mirror reflectors
-Tinted tails/3rd brake light

Posted

How did you set your gain?

I got a shop to do all of it. They are one of the best in my area, but do it by ear...

Nope. They are not the best. They are shitheads.

Avalanche

Alpine Type S comps

Alpine Type S 10''

Alpine MPR-F300

Alpine MRX-M50

Mechamn 270

XS Power d3400s



 

Posted

also set you eq to flat, turn your bassboost and loud off ect. have you changed anything since you got the car back from the shop that set it all up?

I got a new head unit because the last one only had 2v and my new pioneer has 5, everything on the head unit is flat except for the sub level which is at full (6)

you have the sub level set at 6??? What volume do you listen to it at like 5? lol mine is set in the negatives
Haha nah I can go up to 44, it gets loud as hell, but the clip light likes to appear.
Posted

I run my trick at +15....... if you actuslly understand it its not a bad thing

THERE IS NO BUILD LOG!

1998 Chevy Silverado ext cab

Alpine CDA-9887

4 Team Fi 15s

2 Ampere Audio TFE 8.0

2 Ampere Audio 150.4

3 Digital Designs CS6.5 component sets

Dual Mechman 370XP Elite alternators inbound!

8 XS Power d3400

6 XS power d680

Second Skin

Stinger

Tsunami Wiring

Sky High

A Real Voltmeter not a piece of shit stinger.

Posted

How did you set your gain?

I got a shop to do all of it. They are one of the best in my area, but do it by ear...

Nope. They are not the best. They are shitheads.
I would agree now haha, I don't know of any shop or person that has an oscope or DD-1 around my area.

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 5298 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...