98crewcab Posted December 31, 2014 Report Share Posted December 31, 2014 now thats how you start a thread!!!! 06 2500hd, 6.0L, 4l80e, 4wd, (muah work truck) 7" BDS HC lift kit (5) 37x13.5R18 Toyo Open Country M/Ts (5) 18x10 Moto Metal MO962 tablet in lieu of deck blue tooth interconnect to soundstream eq (for volume control and bass control) 4 Alpine type r 10's 6 cubes net, 80sqin's port, tuned to 33hz 2 brutus brx5000.5's 2 pairs 3" polk audio for a pillars 4 pairs polk audio 6.5 comps 1 pair 8" polk audio for mids 2 xspower d3400 batteries.....learning alot from meade and his circle of some of the baddest installers ive seen- thanks guys, for not being so cocky and posting the way it should be done!P.S. Thanks Steve....for the demo!!!! loud as fauk! Link to comment Share on other sites More sharing options...
Broke_Audio_Addict Posted December 31, 2014 Report Share Posted December 31, 2014 Nice ride and great work. We are going to need more pics of that tool box though. That being said a lot of people's definition of "music" is a clipped 30 hz sine wave with some 80 IQ knuckle head grunting about committing crimes and his genitals. Link to comment Share on other sites More sharing options...
MaxMays Posted January 1, 2015 Report Share Posted January 1, 2015 nice Link to comment Share on other sites More sharing options...
Mtnbikecrazy55 Posted January 1, 2015 Report Share Posted January 1, 2015 Fuck yeah! I hate long signatures.... ...what the fuck is wrong wiht you you fucking fuckity fuck fuck head... Mtnbikecrazy55 Feedback Link to comment Share on other sites More sharing options...
starkey814 Posted January 2, 2015 Report Share Posted January 2, 2015 Hell yeah!!!! Link to comment Share on other sites More sharing options...
Azagtoth502 Posted January 2, 2015 Report Share Posted January 2, 2015 Always liked these lil VW's, this is cool to see. pa-pa-platypus sorry not everybody has a companies nuts so far down their throat they catch every drop ball sweat when it falls Link to comment Share on other sites More sharing options...
JP Fabrication Posted January 3, 2015 Author Report Share Posted January 3, 2015 I decided to go further into the mid bass enclosure install and cut open the lower A pillar. I plated the hinge supports with 3/16" then boxed and plug welded it with 12gauge. The amp rack I previously made was cut out so I could add a 3rd ALPINE PDX amp. I also added brackets so the rack is removable. An 1/8" plate was added between the A and B pillar to help support the amp rack. The baffle for the mids are two 3/4"mdf stacked rings with 10/32" nutserts and a band of sintra to recess a flush mounted grill. The mid fiberglass/mdf portion is attached with seven 1/4-20 rivnuts and bolts on top of a rubber seal to form a sealed enclosure. Link to comment Share on other sites More sharing options...
JP Fabrication Posted January 3, 2015 Author Report Share Posted January 3, 2015 Link to comment Share on other sites More sharing options...
JP Fabrication Posted January 3, 2015 Author Report Share Posted January 3, 2015 Layered up with mat, sanded smooth with body filler. A mixture of Marglass and resin was poured into the inside of the pods then a layer of Dynamat was added. A grill was made out of 1/2"mdf and expanded metal then the grill and pod were wrapped with black non backing carpet. The entire enclosure was stuffed with Focal Black Hole Stuff. Link to comment Share on other sites More sharing options...
JP Fabrication Posted January 3, 2015 Author Report Share Posted January 3, 2015 Nice ride and great work. We are going to need more pics of that tool box though. http://www.diymobileaudio.com/forum/off-topic/86122-dffierent-build-tool-box-cabinet.html Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.