hzsogood Posted April 9, 2015 Report Share Posted April 9, 2015 max current draw will probably be 150 amps.. Looking at what I need to do/swap.. Looking for a battery as well .. Current amp is a Soundqubed/AQ 1200d I bought a year ago.. Sub is to be decided Quote Link to comment Share on other sites More sharing options...
Broke_Audio_Addict Posted April 9, 2015 Report Share Posted April 9, 2015 (edited) http://www.mechman.com/alternators/dodge/neon/03-05/2-4-turbo/ Any good agm will do for the batt. When you put in the alt you will need to do the big 3. You really shouldn't need an upgraded alt with that power level though. Edited April 9, 2015 by Broke_Audio_Addict Quote That being said a lot of people's definition of "music" is a clipped 30 hz sine wave with some 80 IQ knuckle head grunting about committing crimes and his genitals. Link to comment Share on other sites More sharing options...
hzsogood Posted April 9, 2015 Author Report Share Posted April 9, 2015 http://www.mechman.com/alternators/dodge/neon/03-05/2-4-turbo/ Any good agm will do for the batt. When you put in the alt you will need to do the big 3. You really shouldn't need an upgraded alt with that power level though. Thank you sir!... yea, its just an aq1200d, but seeing as how the car will be raced, i just didnt want too small of a battery/alt combo .. If I put the battery in the trunk it will be a pita and cause a issue at the track.. Im sure mechman has big 3 diagrams for the wiring on my car, and I would love to see it as electronics is not my specialty lol Quote Link to comment Share on other sites More sharing options...
Broke_Audio_Addict Posted April 9, 2015 Report Share Posted April 9, 2015 If you are unsure how to handle the wiring I'd let a reputable shop do the big 3 for you first then install the alt. Quote That being said a lot of people's definition of "music" is a clipped 30 hz sine wave with some 80 IQ knuckle head grunting about committing crimes and his genitals. Link to comment Share on other sites More sharing options...
hzsogood Posted April 9, 2015 Author Report Share Posted April 9, 2015 General big 3 thread? Quote Link to comment Share on other sites More sharing options...
Nathan DM Posted April 9, 2015 Report Share Posted April 9, 2015 If you have the 2.4 Turbo then here you go. You can email [email protected] for any needed info. We also have the Big3 in stock and ready to go. Quote Link to comment Share on other sites More sharing options...
audiofanaticz Posted April 9, 2015 Report Share Posted April 9, 2015 ^^^ goto bed! lol Quote Link to comment Share on other sites More sharing options...
hzsogood Posted April 9, 2015 Author Report Share Posted April 9, 2015 Thanks guys. Taking a look at everything I might just do the big 3 with a good xs battery from mechman. As the srt4 alts seem to be somewhat descent. Couple questions. What's a direct replacement battery for an 05 srt4? 1200, 1400? ( dont flame me for this one , haha ) when your bolting your new wires to the chassis, I see using dielectric grease is pretty common. But once its all bolted down , can you spray a plastidip, or rubberized coating over it to further prevent any issues , and completely seal it upon top, and underneath? Quote Link to comment Share on other sites More sharing options...
Nathan DM Posted April 9, 2015 Report Share Posted April 9, 2015 ^^^ goto bed! lol I had just gotten up a little earlier.....lol Start out at 4am to get some stuff done. Quote Link to comment Share on other sites More sharing options...
Nathan DM Posted April 9, 2015 Report Share Posted April 9, 2015 Thanks guys. Taking a look at everything I might just do the big 3 with a good xs battery from mechman. As the srt4 alts seem to be somewhat descent. Couple questions. What's a direct replacement battery for an 05 srt4? 1200, 1400? ( dont flame me for this one , haha ) when your bolting your new wires to the chassis, I see using dielectric grease is pretty common. But once its all bolted down , can you spray a plastidip, or rubberized coating over it to further prevent any issues , and completely seal it upon top, and underneath? Just give us a call or email us at [email protected] Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.