focused313 Posted July 15, 2015 Author Report Share Posted July 15, 2015 I suppose not. I was just worried about how close the screw holes would be to the edge, but I took a look and there's about a 1/4 inch space between the hole and the edge of the gasket. Make it happen OP. I'd love to see a full build log of this. Love me some Chevy. I'm also concerned about this. I don't really want to get rid of these subs, but all of my other cars already have subs and if these don't fit...I'll have to get some 10's, which would be much cleaner. Learning Everyday. Pioneer AVH-P4000DVD Alpine SPS-610C BXI-2008D (2) SWR-1242D / Ported Link to comment Share on other sites More sharing options...
reedal Posted July 15, 2015 Report Share Posted July 15, 2015 You should be fine. Like I said, I took a look at my hds312's and you've got about a quarter of an inch between the edge of the gasket and where the screw hole is SMD Tool Map https://www.stevemeadedesigns.com/board/topic/193176-smd-tool-map-new-november-2014/ Build log https://www.stevemeadedesigns.com/board/topic/197217-reeds-03-tahoe-hat-sqaq-singer-xs-shca-cockbox-80prs/?page=32 Link to comment Share on other sites More sharing options...
Triticum Agricolam Posted July 15, 2015 Report Share Posted July 15, 2015 You should be fine. Like I said, I took a look at my hds312's and you've got about a quarter of an inch between the edge of the gasket and where the screw hole is When it comes time to mount the sub you can just rotate the sub 22.5 degrees so the mounting holes are not directly at the top and the bottom. "Nothing prevents people from knowing the truth more than the belief they already know it.""Making bass is easy, making music is the hard part."Builds: Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.