Kyblack76 Posted January 27, 2016 Author Report Share Posted January 27, 2016 Kyle, give me all specs on your ride. Year, and what kind of oem system it has. Let me do some digging too. Please. I'm wondering if you need something like the JL Audio cleansweep or something like that for your unit. You can text me if you want. I'm about to head home now. Before you go spend a stupid amount on the 99 that is what I mean. Sexy unit that 99 is, but if you don't need to spend the dough, why spend it. Right? 07 TSX, just stock audio. Ive tapped into the signals going INTO the oem amp, but shit just seems lacking. I had this same meh 5 or so years ago if you recall when i did the rf set up. SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
scooter99 Posted January 27, 2016 Report Share Posted January 27, 2016 I'm reading right now. I'm reading that the signal wires between the head unit and the stock amp are in mv's. Way too low to do anything with. You need to go on the other side of the amp, the output side. Give me a couple of minutes, waiting on the wife as usual. LOL Facebook Page: S99Creations 2006 F250 Lariat Build Link to comment Share on other sites More sharing options...
Kyblack76 Posted January 27, 2016 Author Report Share Posted January 27, 2016 I'm reading right now. I'm reading that the signal wires between the head unit and the stock amp are in mv's. Way too low to do anything with. You need to go on the other side of the amp, the output side. Give me a couple of minutes, waiting on the wife as usual. LOL the output side? for real? SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
scooter99 Posted January 27, 2016 Report Share Posted January 27, 2016 No scratch that. I've read 3 posts now saying you need to boost the head unit signal pretty amp and press processor. So it's looking like you may need a line driver. Check out this thread here on acurazine.com. looks like he's using a line driver, and an LOC pre stock amplifier. http://acurazine.com/forums/audio-bluetooth-electronics-navigation-94/carologist-stereo-install-781767/?styleid=4 Facebook Page: S99Creations 2006 F250 Lariat Build Link to comment Share on other sites More sharing options...
bcpballer64 Posted January 27, 2016 Report Share Posted January 27, 2016 I'm reading right now. I'm reading that the signal wires between the head unit and the stock amp are in mv's. Way too low to do anything with. You need to go on the other side of the amp, the output side. Give me a couple of minutes, waiting on the wife as usual. LOL the output side?for real? Issue i might see arising on output side is, at least in my oem "premium" system, is after the factory amp the shit is filtered so that it doesn't grenade the oem speakers. I'm curious to see the solution that comes about "The strongest reason for people to retain the right to keep and bear arms is, as a last resort, to protect themselves against tyranny in government." -- (Thomas Jefferson) Link to comment Share on other sites More sharing options...
Kyblack76 Posted January 27, 2016 Author Report Share Posted January 27, 2016 I'm reading right now. I'm reading that the signal wires between the head unit and the stock amp are in mv's. Way too low to do anything with. You need to go on the other side of the amp, the output side. Give me a couple of minutes, waiting on the wife as usual. LOL the output side?for real? Issue i might see arising on output side is, at least in my oem "premium" system, is after the factory amp the shit is filtered so that it doesn't grenade the oem speakers. I'm curious to see the solution that comes about thats a roger... out of the amp with have all channels band passed. These will play that, that will play this......The sum feature may work better with this, because doing what ive been doing is not seeming to work SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
DavidClark Posted January 27, 2016 Report Share Posted January 27, 2016 Going to be a great build Kyle, looking forward to progress Pioneer 80PRS 4 Scan Speak discovery 4" full rage 2 Ampere Audio 6.5 Comp sets 3 Singer 370 Hairpin's 1 Odyssey g78/34-P1500 6 DieHard Platinum Marine g31 4 XS D3100's DC 175.4 DC 90.4 4 DC 5k's 4 m3 lvl 5 15's Soundrive RCA's Lots of welding lead & SkyHigh Team DC AUDIO Link to comment Share on other sites More sharing options...
Leo1103 Posted January 27, 2016 Report Share Posted January 27, 2016 Makes me want to do something with my TL but I promised myself I wont touch it lol. Plus the rear seats are fuckin stupid and dont fold down. just lose the seats and do this lol 2002 Honda CR-VAlpine 9887My BuildRebuilding... Second Skin Damp 4 DC XL 15's 2 DC 5ks Singer 320 amp 6 cap banksSky High wire 2 VM-1's OM-1 all under window line Team DC Audio Obama has a law he's trying to pass right now, trying to ban Leo for being a threat to children everywhere.EDIT: Not in a JP kind of way. I thought I was going to die from all the jizz filling my ears. Link to comment Share on other sites More sharing options...
scooter99 Posted January 27, 2016 Report Share Posted January 27, 2016 I'm reading right now. I'm reading that the signal wires between the head unit and the stock amp are in mv's. Way too low to do anything with. You need to go on the other side of the amp, the output side. Give me a couple of minutes, waiting on the wife as usual. LOL the output side?for real? Issue i might see arising on output side is, at least in my oem "premium" system, is after the factory amp the shit is filtered so that it doesn't grenade the oem speakers. I'm curious to see the solution that comes about thats a roger... out of the amp with have all channels band passed. These will play that, that will play this......The sum feature may work better with this, because doing what ive been doing is not seeming to work Yes that's what I read too. I figured the processor would already have a line driver in it, but it may not be reading enough volts as it is to do anything with. The other thing I saw somewhere on there was that you could use the sub wires, that they're the strongest signal out. So see about that too, maybe if you can locate those, use them that might improve it, before getting an L.D. involved. EDIT: I've read in several places it's dealing with mV's as the signal voltage to the oem amplifier. The JM-1 talks about .5-22v sensitivity, but I'm not sure if that is talking about the same thing we're dealing with. I'd think so, input sensitivity, but I'm not 100% sure. Facebook Page: S99Creations 2006 F250 Lariat Build Link to comment Share on other sites More sharing options...
scooter99 Posted January 27, 2016 Report Share Posted January 27, 2016 Just read your head unit is flat and good signal up until about 35 on the dial. Then it begins to eq. Something else to consider. Facebook Page: S99Creations 2006 F250 Lariat Build Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.