BoomZoom808 Posted December 31, 2015 Report Posted December 31, 2015 What are your filters set to? Sounds like incorrect lpf and subsonic settings 2010 Mazda 3s 2.5L Pioneer DEH-X9600BHS Knu OFC 1/0 SS Platinum AGM / XS Power XP750 Alpine PDX F-4 / Morel Maximo 5 + Coax 5 IA 10.1 / SSA XCON 12
reedal Posted December 31, 2015 Report Posted December 31, 2015 ^^ what boomzoom said. Turn subsonic filter all the way counter clockwise and low pass filter all the way clockwise and then set gains SMD Tool Map https://www.stevemeadedesigns.com/board/topic/193176-smd-tool-map-new-november-2014/ Build log https://www.stevemeadedesigns.com/board/topic/197217-reeds-03-tahoe-hat-sqaq-singer-xs-shca-cockbox-80prs/?page=32
Clownrock95 Posted December 31, 2015 Report Posted December 31, 2015 If your running more than one sub in one box you could have it out of phase or if its a dvc could have the coils out of phase (Speaking from personal experience as my uncle did both to his subs)
Tarball Posted December 31, 2015 Report Posted December 31, 2015 drop the old amp back in to validate the bad RCA theory. CURRENT SYSTEM: Alternator: Stock alt on mids/highs Isolated DC Power 270 SP - Charging @ 16.8v Batteries: (2) XS D1400s Power Cable: Double Runs of 1/0 KNU Kolossus Fleks Headunit: 80-PRS Sub Amp: DC 5.0k Subwoofers: 2 RE MT 15s /PSI dual .7ohm recones Subwoofer Enclosure: 9.1cubes @ 32hz - brutal. Mids & Highs Amp: CT125.4 Active Components: Mids RE XXX 6.5c Highs - 3 RE XXX tweeters per side(A pillar) Noise Control: Damplifier Pro all over the cab. Build Log If you do business with me please leave feedback here: FEEDBACK THREAD Highest Legal Score: 151.0 db Highest Musical 30 Second Average: 151.6 db
forrest_siems Posted December 31, 2015 Author Report Posted December 31, 2015 What are your filters set to? Sounds like incorrect lpf and subsonic settings subsonic is on 20hz lpf is on 85 at the hu bc the lpf on amp goes all the way to 300 and it's really hard to get an exact frequency on that knob
Recommended Posts
Archived
This topic is now archived and is closed to further replies.