reedal Posted August 2, 2016 Report Share Posted August 2, 2016 split the middle pair of RCA outputs from the 80prs, set the HPF and LPF as low and high as you need for the two mid's amplifiers, then use the filters on the amps themselves to highpass/lowpass to the speakers you want to crossover for midbass/midrange. make sense? SMD Tool Map https://www.stevemeadedesigns.com/board/topic/193176-smd-tool-map-new-november-2014/ Build log https://www.stevemeadedesigns.com/board/topic/197217-reeds-03-tahoe-hat-sqaq-singer-xs-shca-cockbox-80prs/?page=32 Link to comment Share on other sites More sharing options...
Krupske Posted August 2, 2016 Report Share Posted August 2, 2016 why do you want to use a LOC ? im lost ? First rca output on the prs80 is for tweets Second one for the midranges And third for subs Want to add a LOC/HLC to have an extra rca output for a midbass amp Link to comment Share on other sites More sharing options...
Krupske Posted August 2, 2016 Report Share Posted August 2, 2016 split the middle pair of RCA outputs from the 80prs, set the HPF and LPF as low and high as you need for the two mid's amplifiers, then use the filters on the amps themselves to highpass/lowpass to the speakers you want to crossover for midbass/midrange. make sense? Yeah i get it i think, but when adjusting the hu won't it mix up between the midrange's and the midbass Link to comment Share on other sites More sharing options...
Kyblack76 Posted August 2, 2016 Report Share Posted August 2, 2016 why do you want to use a LOC ? im lost ? First rca output on the prs80 is for tweets Second one for the midranges And third for subs Want to add a LOC/HLC to have an extra rca output for a midbass amp the last thing id do, is put a loc in there, they are shit....... get a dsp then. SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
Kyblack76 Posted August 2, 2016 Report Share Posted August 2, 2016 why do you want to use a LOC ? im lost ? First rca output on the prs80 is for tweets Second one for the midranges And third for subs Want to add a LOC/HLC to have an extra rca output for a midbass amp the last thing id do, is put a loc in there, they are shit....... get a dsp then. SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
Jhunt94 Posted August 2, 2016 Report Share Posted August 2, 2016 you're not splitting the rca's for the mids, you're splitting the rca's for the sub, then setting the low pass and high pass where you can get usable frequencies to both amps, then fine tuning that range with the crossovers on the midbass and subwoofer amp 2007 Ford F-150 Reg. Cab. Flareside250 Mechman AlternatorSky High Car Audio Big 3 XS Power D3400Rockford Fosgate 1/0 amp kitRockford Fosgate T1500-1bdcpRockford Fosgate T400-4DC Audio Lvl 4 12"Rockford Fosgate Punch 6.5" componentRockford Fosgate Punch 6x8Pioneer AVH-P2300DVDSMD Volt Meter Link to comment Share on other sites More sharing options...
Krupske Posted August 2, 2016 Report Share Posted August 2, 2016 the last thing id do, is put a loc in there, they are shit....... get a dsp then. This is what i wanted to know, thanks! Link to comment Share on other sites More sharing options...
Krupske Posted August 2, 2016 Report Share Posted August 2, 2016 you're not splitting the rca's for the mids, you're splitting the rca's for the sub, then setting the low pass and high pass where you can get usable frequencies to both amps, then fine tuning that range with the crossovers on the midbass and subwoofer amp But the subs rca's will already be splitted once because off two sub amps Link to comment Share on other sites More sharing options...
Jhunt94 Posted August 2, 2016 Report Share Posted August 2, 2016 do you have a pass thru on one of the sub amps? 2007 Ford F-150 Reg. Cab. Flareside250 Mechman AlternatorSky High Car Audio Big 3 XS Power D3400Rockford Fosgate 1/0 amp kitRockford Fosgate T1500-1bdcpRockford Fosgate T400-4DC Audio Lvl 4 12"Rockford Fosgate Punch 6.5" componentRockford Fosgate Punch 6x8Pioneer AVH-P2300DVDSMD Volt Meter Link to comment Share on other sites More sharing options...
Krupske Posted August 2, 2016 Report Share Posted August 2, 2016 do you have a pass thru on one of the sub amps? yeah they're t2500's gonna be strapped Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.