DLHgn Posted November 3, 2016 Report Share Posted November 3, 2016 Holy crap that's a lot of goodies. Can't wait to see this start coming under way. I'm sure i'll eventually hear your car bangin' around town. It may be a lot of money now but at least you're doing it right the first time instead of having to change things later down the line. That will save you money in the long run. If you ever need help with grunt work hit me up. I wouldn't be very useful for specialty work seeing as i'm not real strong in any particular skill set but I can help where needed. Link to comment Share on other sites More sharing options...
ShadeTreeMechanic Posted November 4, 2016 Report Share Posted November 4, 2016 That battery looks interesting. What can you tell us about it? 91 C350 Centurion conversion ( Four Door One Ton Bronco) 250A Alternator (Second Alternator Coming Soon) G65 AGM Up Front / Two G31 AGM in Back Pioneer 80PRS CT Sounds AT125.2 / CT Sounds 6.5 Strato Pro component Front Stage CT Sounds AT125.2 / Lanzar Pro 8" coax w/compression horn tweeter Rear Fill FSD 5000D 1/2 ohm (SoundQubed 7k Coming Soon) Two HDS315 Four Qubes Each 34hz (Two HDC3.118 and New Box Coming Soon) Link to comment Share on other sites More sharing options...
DLHgn Posted November 4, 2016 Report Share Posted November 4, 2016 That battery looks interesting. What can you tell us about it? I couldn't tell you detailed specifics but I can tell you that they're 40ah lipo batteries rated for 7kW. They're also SUPER light. I couldn't believe I was holding a battery when I picked it up. That's all I got on info though. Link to comment Share on other sites More sharing options...
Swordlordboy1234 Posted November 4, 2016 Author Report Share Posted November 4, 2016 Holy crap that's a lot of goodies. Can't wait to see this start coming under way. I'm sure i'll eventually hear your car bangin' around town. It may be a lot of money now but at least you're doing it right the first time instead of having to change things later down the line. That will save you money in the long run. If you ever need help with grunt work hit me up. I wouldn't be very useful for specialty work seeing as i'm not real strong in any particular skill set but I can help where needed. Thanks bud! Ill be slowly working on this from now until mid to late Jan. My girlfriend approved all of this on the premise that I take my time and do everything as perfect as possible. and DONT FREAKING TOUCH IT after im done. My old YouTube channel : http://www.youtube.com/user/SwordLords1234?feature=mhee My old build log : http://www.stevemeadedesigns.com/board/topic/161872-96-accord-b2-sundown-sky-high-dc-power-re-re-build-for-heatwave/page-37 My New Build - http://www.stevemeadedesigns.com/board/topic/207041-2016-mazda-6-sql-build/ 2016 Mazda 6 Touring JL Fix 86 - OEM signal correction B2 prototype DSP 6to8 B2 Ref63 - 3 way active set 2 B2 Class H quattro's 1 B2 Zero.5R @.5 2 B2 HNv3 12 d2 B2 SLIP40 - Lithium in the trunk Northstar Group 35 under the hood 100ft 2/0 welding cable 30ft 4ga welding cable 20ft 8ga welding cable All stinger OFC speaker wire Soundrive custom RCA's Tons of attention to detail.... Can it be perfect? Link to comment Share on other sites More sharing options...
Swordlordboy1234 Posted November 4, 2016 Author Report Share Posted November 4, 2016 That battery looks interesting. What can you tell us about it? I couldn't tell you detailed specifics but I can tell you that they're 40ah lipo batteries rated for 7kW. They're also SUPER light. I couldn't believe I was holding a battery when I picked it up. That's all I got on info though. He summed it up. A 100a charge (50 continuous) and this battery would be fine on a 5k amplifier. it weights about 20 lbs if that.. at heatwave i struggled to hold it up by 1 finger for a picture. and im pretty comfortable with 3 fingers holding it. It will rest 13.6 or so... so it will force the northstar up some and will be dragged down some. It won't matter as long as i don't leave the car sitting for a week + and i plan on addressing that for easy access incase i do. This is a great choice for me because i wanted to keep my stock alternator and cut down on weight but still have a decent amount of power. Win win win. My old YouTube channel : http://www.youtube.com/user/SwordLords1234?feature=mhee My old build log : http://www.stevemeadedesigns.com/board/topic/161872-96-accord-b2-sundown-sky-high-dc-power-re-re-build-for-heatwave/page-37 My New Build - http://www.stevemeadedesigns.com/board/topic/207041-2016-mazda-6-sql-build/ 2016 Mazda 6 Touring JL Fix 86 - OEM signal correction B2 prototype DSP 6to8 B2 Ref63 - 3 way active set 2 B2 Class H quattro's 1 B2 Zero.5R @.5 2 B2 HNv3 12 d2 B2 SLIP40 - Lithium in the trunk Northstar Group 35 under the hood 100ft 2/0 welding cable 30ft 4ga welding cable 20ft 8ga welding cable All stinger OFC speaker wire Soundrive custom RCA's Tons of attention to detail.... Can it be perfect? Link to comment Share on other sites More sharing options...
jcarter1885 Posted November 4, 2016 Report Share Posted November 4, 2016 I'm definitely tuned in, loved the last build as well. What are some box recommendations/port area for those B2s? Looking at getting some new 12s soon and can't find a lot of info for them. Thanks Nav-TV Zen V Audio Interface AudioControl DM-608 (2) Stevens Audio Neo-Comp Full-Size Horns (4) Faital Pro 6PR160 6.5" AudioControl LC-6.1200 (1) Fi Neo 4.7 15" D2 in 3.74 Cubic Feet @ 27.70 Hz Ampere Audio AA3800.1 Odyssey ODP-AGM48 Battery (Starting) Odyssey ODX-AGM31 Battery (Trunk) Big 3 - 2\0 Welding Cable, KnuKonceptz Speaker Wire & 1/0 Power Cable, NVX RCAs, Second Skin (Speaker Tweaker Pads, Damplifier Pro Mat), Diode Dynamics LEDs Link to comment Share on other sites More sharing options...
DLHgn Posted November 4, 2016 Report Share Posted November 4, 2016 I'm definitely tuned in, loved the last build as well. What are some box recommendations/port area for those B2s? Looking at getting some new 12s soon and can't find a lot of info for them. Thanks This has all the info for the HN series including recommended enclosure specs. http://www.b2audio.com/wp-content/uploads/2016/06/HNv3_man.pdf This is the manual for the IS series which is the series right below the HN series. I have the IS12 v3 and love it. http://www.b2audio.com/wp-content/uploads/2015/12/el_is_man.pdf Link to comment Share on other sites More sharing options...
Karkov Posted November 5, 2016 Report Share Posted November 5, 2016 THIS GONNA BE GOOD!!!! 2007 Chevy Tahoe (SOLD) 12 ~ FI Audio X series 10" w/BP option 2 ~ DC Audio 5.0K @0.67 3 ~ DC Audio 5.0K @1.0 2 ~ PPI 3 way sets (not installed yet) 1 ~ RF T400-4, 1 ~ RF T600-2, 1 ~ RF T600-4 4 ~ CT Sounds 5.25" Strato comps (rear fill only) 1 ~ XS Power D4800 1 ~ XS Power D3400 8 ~ XS Power XP3000 160 stock alt, Mechman 370 Elite, 185 DC Power 320+ Sq. Ft. Sound Deadener Pioneer AVH-X5500BHS Youtube: https://www.youtube.com/user/knfjdkghjudfhsgkjdhf/videos?sort=dd&view=0&shelf_id=0 Link to comment Share on other sites More sharing options...
Swordlordboy1234 Posted November 5, 2016 Author Report Share Posted November 5, 2016 I'm definitely tuned in, loved the last build as well. What are some box recommendations/port area for those B2s? Looking at getting some new 12s soon and can't find a lot of info for them. Thanks This has all the info for the HN series including recommended enclosure specs. http://www.b2audio.com/wp-content/uploads/2016/06/HNv3_man.pdf This is the manual for the IS series which is the series right below the HN series. I have the IS12 v3 and love it. http://www.b2audio.com/wp-content/uploads/2015/12/el_is_man.pdf With my HN's based on MY PERSONAL experanice. I have had good success with about 2.2 cubes each sub AFTER all displacements. a hair larger at 2.3 wouldn't kill it if your unsure. I tune low... 31 or so. and I had about 24 sq inches of port area per sub. Last box for them was 4.3 cubes tuned to 31, 48 sq inches of port. My old YouTube channel : http://www.youtube.com/user/SwordLords1234?feature=mhee My old build log : http://www.stevemeadedesigns.com/board/topic/161872-96-accord-b2-sundown-sky-high-dc-power-re-re-build-for-heatwave/page-37 My New Build - http://www.stevemeadedesigns.com/board/topic/207041-2016-mazda-6-sql-build/ 2016 Mazda 6 Touring JL Fix 86 - OEM signal correction B2 prototype DSP 6to8 B2 Ref63 - 3 way active set 2 B2 Class H quattro's 1 B2 Zero.5R @.5 2 B2 HNv3 12 d2 B2 SLIP40 - Lithium in the trunk Northstar Group 35 under the hood 100ft 2/0 welding cable 30ft 4ga welding cable 20ft 8ga welding cable All stinger OFC speaker wire Soundrive custom RCA's Tons of attention to detail.... Can it be perfect? Link to comment Share on other sites More sharing options...
Swordlordboy1234 Posted November 5, 2016 Author Report Share Posted November 5, 2016 THIS GONNA BE GOOD!!!! Thanks bro! It won't be a large build (i must be scared or something) but im hoping its attention to detail and overall performance makes up for not doing 153's out the trunk . Side note. I have pictures of actual work done to the car. Who wants to see? I also am still waiting on tesa tape to send me some stuff, Soundrive to send me my RCA's and 12V metalworks to send me my custom machined stuff. My old YouTube channel : http://www.youtube.com/user/SwordLords1234?feature=mhee My old build log : http://www.stevemeadedesigns.com/board/topic/161872-96-accord-b2-sundown-sky-high-dc-power-re-re-build-for-heatwave/page-37 My New Build - http://www.stevemeadedesigns.com/board/topic/207041-2016-mazda-6-sql-build/ 2016 Mazda 6 Touring JL Fix 86 - OEM signal correction B2 prototype DSP 6to8 B2 Ref63 - 3 way active set 2 B2 Class H quattro's 1 B2 Zero.5R @.5 2 B2 HNv3 12 d2 B2 SLIP40 - Lithium in the trunk Northstar Group 35 under the hood 100ft 2/0 welding cable 30ft 4ga welding cable 20ft 8ga welding cable All stinger OFC speaker wire Soundrive custom RCA's Tons of attention to detail.... Can it be perfect? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.