rocking.that.eclipse Posted January 20, 2017 Author Report Posted January 20, 2017 16 hours ago, SnowDrifter said: Lithium and lead/acid are going to have different resting/usable voltages. Based on what you described I suspect the lithium rests a bit higher than the d3400 Where are you load testing/reading voltage from? Did a multitude of places trying to see if he had some parasidic drop in current or voltage from a bad ground. Quote
reedal Posted January 20, 2017 Report Posted January 20, 2017 Did you clamp the current from the lithium to the amp(s)? The alt may only be outputting 85 because it only needs to make 85.... Quote SMD Tool Map https://www.stevemeadedesigns.com/board/topic/193176-smd-tool-map-new-november-2014/ Build log https://www.stevemeadedesigns.com/board/topic/197217-reeds-03-tahoe-hat-sqaq-singer-xs-shca-cockbox-80prs/?page=32
rocking.that.eclipse Posted January 22, 2017 Author Report Posted January 22, 2017 On 1/20/2017 at 10:49 AM, reedal said: Did you clamp the current from the lithium to the amp(s)? The alt may only be outputting 85 because it only needs to make 85.... Pulling 325 dynamic with load tester it was pulling 400 and only putting out 85.... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.