BMS Posted April 19, 2017 Report Posted April 19, 2017 So a long time ago i bought a clark synthesis platinum and i was disappointed in it for the price musically it wasn't impressive it would get hot after any length of time. i had it set up just screwed into a board and i set the end on the board on cinder blocks and those were on carpet at 20 hz it didn't have a whole lot force which is what i wanted and at 100 hz it was almost painful but it had no real good force under 70 hz. anyway i want to install some under my bed plenty of room 10 + so should i buy 8 aura's or dayton shakers or is the clark really the best there is or maybe i didn't set it up well.
ShadeTreeMechanic Posted April 20, 2017 Report Posted April 20, 2017 Wait, what? You missed April 1st by a couple of weeks. 91 C350 Centurion conversion ( Four Door One Ton Bronco) 250A Alternator (Second Alternator Coming Soon) G65 AGM Up Front / Two G31 AGM in Back Pioneer 80PRS CT Sounds AT125.2 / CT Sounds 6.5 Strato Pro component Front Stage CT Sounds AT125.2 / Lanzar Pro 8" coax w/compression horn tweeter Rear Fill FSD 5000D 1/2 ohm (SoundQubed 7k Coming Soon) Two HDS315 Four Qubes Each 34hz (Two HDC3.118 and New Box Coming Soon)
BMS Posted April 20, 2017 Author Report Posted April 20, 2017 my bed has a "footing" on the end which is a flat plane of wood.
Jessica Posted April 20, 2017 Report Posted April 20, 2017 whatever source you are using probably filters out low frequencies therefore reducing output of the transducer. Rest in peace, walled 87 accord build log 03' Corolla build with AA Mayhem inside. My super random youtube channel and terrible camera work. Wiring comparison by CaptainzPlanetz Wire and fuse guide by Guest SyKo13
BMS Posted April 20, 2017 Author Report Posted April 20, 2017 i was probably using my qsc mx 700 which has no such subsonic controls or filters of anything like that that i know of but i'm sure i tried it on a few sources before i sold it i in fact know i played many tones such as 20 hz and cranked it up to near bottoming out if that is how they term it on a transducer.
Jessica Posted April 20, 2017 Report Posted April 20, 2017 bolt it to the floor then Rest in peace, walled 87 accord build log 03' Corolla build with AA Mayhem inside. My super random youtube channel and terrible camera work. Wiring comparison by CaptainzPlanetz Wire and fuse guide by Guest SyKo13
BMS Posted April 20, 2017 Author Report Posted April 20, 2017 floor is concrete at least i am assuming, that wouldn't achieve much regardless of what king of floor you have it may do something if you were on a 2nd storey.
aculous Posted June 9, 2017 Report Posted June 9, 2017 you could just get rid of the bass shakers and get 1 sub that would completely fix all your issues. Bass shakers are pretty pointless. Also if you're trying to get your girl off its easier to use your tongue or a vibrator.
jk13 Posted June 9, 2017 Report Posted June 9, 2017 Sold Aura for a while, nothing special and nothing wrong with them. You have to realize that sound and feeling are two different senses and shakers are at their best when combined with a sub. Might need to adjust your expectations. Static drops are my bag.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.