Liljxthexripper Posted September 11, 2021 Report Share Posted September 11, 2021 2 sets of speaker terminals, i can only read one at a time with multimeter. did voltage calculations to figure out what i need my gain to read to get 1000 watts of output since i dont have an aftermarket alt. question is, is the voltage i read from one channel split so i need to split my final voltage to get the right gainset? because its still monoblock. thats the only reason im asking Link to comment Share on other sites More sharing options...
Dafaseles Posted September 11, 2021 Report Share Posted September 11, 2021 It is only a single channel amp. So your good just getting it from wherever you can. 2011 Chevy Silverado under construction My build log here. Check it out! Link to comment Share on other sites More sharing options...
Never Enough Bass Posted September 11, 2021 Report Share Posted September 11, 2021 It's full bridge those 2 terminals are internally connected 06 Charger Pioneer double din Pioneer 6.5 and 6×9's Knukoncept Krystal kable rca's 0 ga knukoncept kolossus wire Big 3 same wire ^ 1 run 8g karma ss speaker wire Sundown sia 3500d at 1ohm 2 Sundown U series 12's Duralast platinum agm H7 (Main) Xs power d3400 Trying to find a ho alt Link to comment Share on other sites More sharing options...
Never Enough Bass Posted September 11, 2021 Report Share Posted September 11, 2021 I have a stock alt but my stock is a 160a 06 Charger Pioneer double din Pioneer 6.5 and 6×9's Knukoncept Krystal kable rca's 0 ga knukoncept kolossus wire Big 3 same wire ^ 1 run 8g karma ss speaker wire Sundown sia 3500d at 1ohm 2 Sundown U series 12's Duralast platinum agm H7 (Main) Xs power d3400 Trying to find a ho alt Link to comment Share on other sites More sharing options...
Liljxthexripper Posted September 11, 2021 Author Report Share Posted September 11, 2021 1 hour ago, Never Enough Bass said: It's full bridge those 2 terminals are internally connected my stock alt is 150 and a stock agm battery since its a 2020. problem is the alternator has already been overworking because it started turning black. although that mightve been fault of the old amp, wiring kit etc as well. i know i did run ac and the subs at the same time too not thinking about it. but there isnt such specific information out there even no matter how i word it. usually just get keyword triggered and get random stuff that sometimes is even unrelated to what im asking. i see you are using the d3400 but a different main? do you have a ground running all the way up front too? Link to comment Share on other sites More sharing options...
Never Enough Bass Posted September 11, 2021 Report Share Posted September 11, 2021 Both of my battery's are in the trunk but they are both agm battery's the duralast is 76 ah and the d3400 is like 80 ah or something like that 06 Charger Pioneer double din Pioneer 6.5 and 6×9's Knukoncept Krystal kable rca's 0 ga knukoncept kolossus wire Big 3 same wire ^ 1 run 8g karma ss speaker wire Sundown sia 3500d at 1ohm 2 Sundown U series 12's Duralast platinum agm H7 (Main) Xs power d3400 Trying to find a ho alt Link to comment Share on other sites More sharing options...
Never Enough Bass Posted September 11, 2021 Report Share Posted September 11, 2021 I have a build log it's Alice and the wonderland 06 Charger Pioneer double din Pioneer 6.5 and 6×9's Knukoncept Krystal kable rca's 0 ga knukoncept kolossus wire Big 3 same wire ^ 1 run 8g karma ss speaker wire Sundown sia 3500d at 1ohm 2 Sundown U series 12's Duralast platinum agm H7 (Main) Xs power d3400 Trying to find a ho alt Link to comment Share on other sites More sharing options...
Never Enough Bass Posted September 12, 2021 Report Share Posted September 12, 2021 53 minutes ago, Liljxthexripper said: my stock alt is 150 and a stock agm battery since its a 2020. problem is the alternator has already been overworking because it started turning black. although that mightve been fault of the old amp, wiring kit etc as well. i know i did run ac and the subs at the same time too not thinking about it. but there isnt such specific information out there even no matter how i word it. usually just get keyword triggered and get random stuff that sometimes is even unrelated to what im asking. i see you are using the d3400 but a different main? do you have a ground running all the way up front too? I have no idea when my alternator was changed so it could go out any min but I been looking around for the right high output for me 06 Charger Pioneer double din Pioneer 6.5 and 6×9's Knukoncept Krystal kable rca's 0 ga knukoncept kolossus wire Big 3 same wire ^ 1 run 8g karma ss speaker wire Sundown sia 3500d at 1ohm 2 Sundown U series 12's Duralast platinum agm H7 (Main) Xs power d3400 Trying to find a ho alt Link to comment Share on other sites More sharing options...
stingray72 Posted September 13, 2021 Report Share Posted September 13, 2021 On 9/11/2021 at 8:15 PM, Never Enough Bass said: I have no idea when my alternator was changed so it could go out any min but I been looking around for the right high output for me What year make and model do you have? Maybe i can help you look. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.