Jump to content

Recommended Posts

sweet i looked for days at home depot, the smallest one i could find was almost 2 feet wide. and they didnt have the small ones been there 3 times, im going to try and do the whole inside of my car.

Cheapy roller

Good roller

Vehicle: 1997 S10 Blazer 4dr 4X4

Exterior: Rear End Bagged, Black Grill, Lifted 2"

Amplifiers: Rockford Fosgate T8004 & T10001bd

Batteries: 2 Stinger SPV35, Kinetik HC2400

Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v

Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube)

Headunit: Eclipse CD3200 w/ 80G iPod

Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors)

Subwoofers: 1 15" Fi BL Fully Loaded

Wire: All 1/0g Kicker Hyperflex

My YouTube Videos

My Fiberglass A-Pillar Build

My "Seamless" Looking Box Build

My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer)

My Stealth 8" Fiberglass Build (for '05 TrailBlazer)

My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk

My feedback/references...

Link to comment
Share on other sites

this is roof fixing shit, it actually worked pretty well, it came on a roll, it was 10 feet. and i cut it into "shingles"

Bro that isn't the same as peel 'n' seal that stuff is a patch for shingles... :blush:

Edited by wL<3bass

Vehicle: 1997 S10 Blazer 4dr 4X4

Exterior: Rear End Bagged, Black Grill, Lifted 2"

Amplifiers: Rockford Fosgate T8004 & T10001bd

Batteries: 2 Stinger SPV35, Kinetik HC2400

Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v

Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube)

Headunit: Eclipse CD3200 w/ 80G iPod

Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors)

Subwoofers: 1 15" Fi BL Fully Loaded

Wire: All 1/0g Kicker Hyperflex

My YouTube Videos

My Fiberglass A-Pillar Build

My "Seamless" Looking Box Build

My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer)

My Stealth 8" Fiberglass Build (for '05 TrailBlazer)

My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk

My feedback/references...

Link to comment
Share on other sites

Over here we have a product called Flashtac. I guess it's the equivelant to your peal and seal, really cheap. It sucks and does literally nothing accoustically, Dynamat is 100x better.

flashtac_000.jpg

craptact.jpg

 

36CFDEF1-F93D-4FA3-9934-64EE2EC94080-2856-0000071FCFA47672.png.ebe82e417eabc5f239a4adf293b099f9.png

Previous 150+ daily rides:

Volvo 240 wagon 2 x DD Audio 9915s walled, Isuzu Trooper 6 x DD Audio 3515s walled clamshell, Lexus LX470  2 x Kicked Solo X 18s, Lexus LS400 4  x American Bass HD18 walled

SMD - System of The Month August 2008

My Youtube Videos

Link to comment
Share on other sites

so is that some kind of getto sound dampining. does it work? i have the good dynamat roller works good.

getto and less than half the price of dynamat. it works better than nothing. if you put 2 layers you would still save money unless you have hook ups on dynamat, i get cascade sound deadner wholesale and still save with peel and seal or the other brand i posted :D.

REST IN PARADISE BIG RICH (Sqmonte) never forgotten

Why do you guys ALWAYS dispute on NUMBERS?????

It's such a played out argument, so fucking annoying....

It's 12 fuckin 15's.... It's louder than you... Shut the fuck up...

/Rant

:)

I'm so jealous, it makes me want to club baby seals. That shit gets down HARD!

dont buy from knowledge he will scam you.

http://www.stevemeadedesigns.com/board/topic/30995-official-knowledge-feedback/

Link to comment
Share on other sites

Over here we have a product called Flashtac. I guess it's the equivelant to your peal and seal, really cheap. It sucks and does literally nothing accoustically, Dynamat is 100x better.

flashtac_000.jpg

craptact.jpg

maybee what your using didnt work, But I know for a fact that what I did in that car did help deaden it up, it also helped reduce the road noise.

now is it as good as dynamat, hushmat or any of the other good shit, nah not even close, but to say that it doesn nothing is bs.

Link to comment
Share on other sites

getto and less than half the price of dynamat. it works better than nothing. if you put 2 layers you would still save money unless you have hook ups on dynamat, i get cascade sound deadner wholesale and still save with peel and seal or the other brand i posted :D.

thanks for the info i seen somewhere on the net years ago about someone using some type of roofing material but could never find it.

smdsig2.jpg
Link to comment
Share on other sites

The shingle stuff will fall off real quick. Especially on a good and hot day. Been there, done that.

This is the stuff I last used in the Beretta. I do have some in the van. Been there since a week after I got the van and hasn't pealed off any. Good stuff. About the same price as P&S. Seems a little thicker than P&S also. Got it at Home Depot.

thelabel2io.jpg

aluminumbacking0bq.jpg

Tried to get the thickness here.

thickness9tw.jpg

Also, about the roller thing. Look in the wallpaper section at Home Depot or Lowes. They have a little plastic roller that works quite nice. Costs about $3. I think they have a small wooden one also, but I can't remember for sure.

Team Pinnacle / Team SouthEastSPL / Team SoundStream / Team GPI / GPI Sales Rep for Florida and Georgia

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   1 Member, 0 Anonymous, 800 Guests (See full list)

×
×
  • Create New...