Mosin Posted July 29, 2008 Report Posted July 29, 2008 Hifonics TXi 1008D Kicker ZX1000.1 Just looking for opinions on the 2 amplifiers, thats all. Quote Derp.
EricM9104 Posted July 29, 2008 Report Posted July 29, 2008 Kicker. Quote 2015 Honda Civic LX 4dr | 110k miles | Stock 1996 GMC Yukon SLT 4dr 4wd | 260k miles | JVC Head-unit
Mosin Posted July 29, 2008 Author Report Posted July 29, 2008 Kicker. So the Kicker would be WAY better wired at 2-Ohms compared to the TXi1008D? Quote Derp.
Guest aseanj52 Posted July 29, 2008 Report Posted July 29, 2008 What does the Hifonics do at 2 ohm? 500. . . . i think. Quote
loganberry Posted July 29, 2008 Report Posted July 29, 2008 So the Kicker would be WAY better wired at 2-Ohms compared to the TXi1008D? more efficient thats for sure Quote My F-150 Build GET ON THE BANDWAGON what if they tried messing with the amps when the subs werent louder hahah jk
Mosin Posted July 30, 2008 Author Report Posted July 30, 2008 more efficient thats for sure The ZX1000.1 does more than its rated at right? Quote Derp.
wL<3bass Posted July 30, 2008 Report Posted July 30, 2008 The ZX1000.1 does more than its rated at right? Yeh the ones I was taking a look at did 1296 and 1301wrms on the birthsheet. Quote Vehicle: 1997 S10 Blazer 4dr 4X4 Exterior: Rear End Bagged, Black Grill, Lifted 2" Amplifiers: Rockford Fosgate T8004 & T10001bd Batteries: 2 Stinger SPV35, Kinetik HC2400 Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube) Headunit: Eclipse CD3200 w/ 80G iPod Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors) Subwoofers: 1 15" Fi BL Fully Loaded Wire: All 1/0g Kicker Hyperflex My YouTube Videos My Fiberglass A-Pillar Build My "Seamless" Looking Box Build My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer) My Stealth 8" Fiberglass Build (for '05 TrailBlazer) My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk My feedback/references...
Mosin Posted July 30, 2008 Author Report Posted July 30, 2008 Yeh the ones I was taking a look at did 1296 and 1301wrms on the birthsheet. Would that be a little to much for a 15" L7? Quote Derp.
wL<3bass Posted July 30, 2008 Report Posted July 30, 2008 Would that be a little to much for a 15" L7? No just dont clip it....dmm and gain chart = your friend Quote Vehicle: 1997 S10 Blazer 4dr 4X4 Exterior: Rear End Bagged, Black Grill, Lifted 2" Amplifiers: Rockford Fosgate T8004 & T10001bd Batteries: 2 Stinger SPV35, Kinetik HC2400 Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube) Headunit: Eclipse CD3200 w/ 80G iPod Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors) Subwoofers: 1 15" Fi BL Fully Loaded Wire: All 1/0g Kicker Hyperflex My YouTube Videos My Fiberglass A-Pillar Build My "Seamless" Looking Box Build My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer) My Stealth 8" Fiberglass Build (for '05 TrailBlazer) My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk My feedback/references...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.